This sleek and sturdy 24-Hour, 7-Day Digital Mains Timer has multiple benefits – from delivering energy-efficiency, to automating your home and keeping it safe and secure from burglars. The 24-Hour, 7-Day Digital Mains Timer enables you to use a variety of timed or random functions to programme household appliances. For instance, you can automatically programme some appliances to switch on at night, and benefit from low electricity tariffs at these times. Alternately, you can use the random on/off feature to programme your mains to switch on lights at random durations when you are away from home. This will deter burglars and fool them in to believing that your house is occupied. Additionally, 8 programmable on/off cycle per day on the 24-Hour, 7-Day Digital Mains Timer allow you to easily program an appliance to switch on/off at specified durations times during a 1-week period, over individual days or across a combination of days.Voltage: 250V AC~50Hz Maximum Load: 13A, 3200WMin Setting Time: 1 minute Operating Temperature: -10 to +40°CAccuracy: +/- 1 minute per month Battery Backup: NiMH 1.2V>100 hoursCE & BS5733 ApprovedPlease note: This timer is not suitable for inductive loads, such as heaters or fans.

This glow in the dark clock features a temperature read out. The backlit display features time, date & temperature whilst the translucent case glows with 7 different colours. The light functions when the clock is pressed the colour will change.To Set Time and DateFit the batteries with the correct orientation.Press SET to activate the time programme (time and date).Press the Up/Down in the following sequence after each to confirm press set (hour -> minute -> year->month ->day -> exit by pressing set.The range of setting: 1-12 hour, 0-59 for a minute, 2000 – 2099 for a year, 1-12 for a month,1-31 for the day, the week will change from Monday to Sunday automatically with changes to date.Setting the AlarmPress the AL buttonPress the set button then using the Up/Down buttons set the required alarm time pressing the set button to confirm,(hour -> minute-> snooze set the amount of time between alarm activations -> one of the 8 Melody’s).When the alarm is set press AL then the up button once to enable the alarm a second time to enable snooze mode.To change the time from 12H to 24H clock press the up button when the time is set. Changing temperature betweenCelsius and Fahrenheit press the down button. To disable the alarm mode, press the up button.Colour ModePress the top of the clock case this will actuate the tap buttons and the appliance will go through a colour changecycle. (Approximately 45 seconds.)