Very handy 10 x 10g sachets of this super moisture absorbing silica gel. It will help keep your cameras, lenses and electronic equipment safe from the damp and its very damaging effects as it absorbs water particles/vapour that can be found in the air (especially in damp conditions).It is also highly recommended for when storing all electronic and optical equipment short or longer term and could save you a fortune in future repair bills.  Just pop a few packs in your camera bag, lens case, equipment case etc. and this will absorb moisture and help to prevent damaging corrosion to the equipment's internals.Silica gel sachets are used by all good equipment manufacturers in the packing of their valuable equipment underlining its value. Silica gel may also be reused many times over as it can be dried-out over a warm radiator, etc.Also known as dehumidifier bags, silica gel can also be used to help keep clothing more fresh when in storage or drawers or in the popular space (vacuum) bags.Reduce the chances of valuable tools rusting by putting silica gel in tool boxes and chests.What's in the Box? 10 x 10g sachets of super moisture absorbing silica gel Each 10g bag measures 79 mm x 45 mm Please note that the actual bag weight can be +/- 5% of the stated weight.

Extra value price on a superb photographers laptop/camera backpack together with our superb Travel-Pro tripod!

Small lightweight compact USB charger, which is ideal for travelling. It can be used in conjunction with a car charger for charging in a vehicle or alternatively charges via usb port on a laptop or pc or even a powerbank.It features an LED indicator for charging status is specifically designed for Canon LP-E6 Camera Batteries for the following cameras: Canon EOS 5D Mark II Canon EOS 5D Mark III Canon EOS 60D Canon EOS 60Da Canon EOS 70D Canon EOS 7D Canon EOS 6DSpecifications Input: Micro USB 5V /1A, Output: 4.2v / 800mah, 8.4v 800mah What's includedUSB Charger for LP-E6 Batteries0.8m Micro usb charging cable

This metal adapter ring fits into our 7dayshop square filter holder and then the holder can be screwed onto your lens thereby allowing use of 7dayshop square filters.This adapter ring fits lenses with a filter size of ? 58mm. You may need different adapter rings for different lenses but you can use the same holder and filters of course.To check the size of the adapter ring you need (the filter size of your lens) then please look for a symbol like this ? which is normally on the front of the lens as you look into it. Alternatively look at the reverse of your lens cap and it will normally show the ??mm filter size.Buy with complete confidence. Try this product for 30 days and if you are not 101% Delighted with your purchase then please return to us for a full refund of the purchase price paid.

This metal adapter ring fits into our 7dayshop square filter holder and then the holder can be screwed onto your lens thereby allowing use of 7dayshop square filters.This adapter ring fits lenses with a filter size of ? 82mm. You may need different adapter rings for different lenses but you can use the same holder and filters of course.To check the size of the adapter ring you need (the filter size of your lens) then please look for a symbol like this ? which is normally on the front of the lens as you look into it. Alternatively look at the reverse of your lens cap and it will normally show the ??mm filter size.Buy with complete confidence. Try this product for 30 days and if you are not 101% Delighted with your purchase then please return to us for a full refund of the purchase price paid.

Busy photographers need to change a lens in a flash, but where do they put that lens? Perhaps stuff it into a large pocket or throw them in your camera bag and without the lens caps fitted you are risking damage...The QuickChange lens holder is exactly what you need - holds 2 SONY A Series lenses back to back and protects the vulnerable (and expensive) rear elements / lenses at the same time - no fiddly caps to find and fit.Securely holds 2 lenses, lightweight but strong aluminium construction with a locking system to ensure lenses won't twist off. Uses a release button and white dots just like the cameras original mounting system.Supplied with an adjustable nylon strap for convenient over the shoulder use. In the middle of the unit, there is a dividing shield to keep the back of the lens fingerprint free and protected from dust etc.Use with your SONY DSLR system etc. This unit is similar to the Peak Design Lens Capture unit, Micnova and Kooka KK-LK3 unit. Just much better value of course! :-)

Busy photographers need to change a lens in a flash, but where do they put that lens? Perhaps stuff it into a large pocket or throw them in your camera bag and without the lens caps fitted you are risking damage...The QuickChange lens holder is exactly what you need - holds 2 Nikon lenses back to back and protects the vulnerable (and expensive) rear elements / lenses at the same time - no fiddy caps to find and fit.Securely holds 2 lenses, lightweight but strong aluminium construction with locking system to ensure lenses wont twist off. Uses a release button and white-dots just like the cameras original mounting system.Supplied with adjustable nylon strap for convenient over the shoulder use. In the middle of the unit there is a dividing shield to keep the back of the lens fingerprint free and protected from dust etc.Use with your Nikon DSLR system etc. This unit is similar to the Peak Design Lens Capture unit, Micnova and Kooka KK-LK2 unit. Just much better value of course! :-)

Versatile and highly water resistant, this super compact and bright set of red and white lights is typically used as a front and rear bike light set - but has many other uses, including safety lights for dark winter nights.These lights can be attached and be removed in seconds thanks to the built-in mounting bands that are manufactured from super flexible silicone.They provide a strong and movement free grip (which is vibration resistant) and give a versatile and super-quick fitting to bike handlebars and seat posts as well as helmets, pet collars, straps, bags and much more.These lights also provide a great emergency back-up that you can store in your pocket, messenger bag, rucksack, car glove-box or desk, etc.Both light units have dual LED bulbs and 3 lighting modes - stay-on, slow and fast flashing. The white light has white LED bulbs and the red unit has red LED bulbs. Long life batteries are included in the selling price, supplied ready to go. For replacement batteries, please simply search CR2023Specifications 3 lighting modes: Permanent on, slow flash and fast flash. The flashing mode extends the already long battery life and offers a high visibility safety light Dimensions of each torch: 90mm long (this can stretch longer), 32mm wide and 14mm deepBatteries: Each unit requires 2 x CE2032 lithium coin batteriesWhat's included Super Bright LED Bicycle lights - Front & Rear Each torch unit includes 2 x CR2032 lithium coin batteries for super-long life

Extra low price on this superb quality camera case together with a mini tripod, multi-use memory card case, lens cleaning cloths and some moisture absorbing silica gel sachets.

Extra low price on this superb quality camera case together with a mini tripod, multi-use memory card case, lens cleaning cloths and some moisture absorbing silica gel sachets.