What stands out High quality 6.5kW portable air conditioning unit for commercial spaces up to 150m³Industry-leading use of EC Fan Technology minimise noise output and maximise efficiencyBackward curved impellers push air further and through smaller diameter ductingCool two areas from one unit up to 1.25m per outletEasy to control with the digital thermostat and lockable castorsOver 95% less harmful to the environment using a low global warming potential refrigerant R454C The detailsThe unit that supersedes the ever popular MCM230 the MCe6.0 promises up to 6.5kW of cooling which makes it effective for cooling a range of commercial spaces up to 150m³.This deceptively powerful monoblock unit utilizes Broughton’s unique airflow delivery system to power the exhaust air along up to 10m of narrow 150mm diameter ducting. Not only does this make the ducting much more manageable and easier to store it also allows the unit to be sited up to 10m away from the warm air exhaust point preventing exhaust heat radiating back into the area you are looking to cool making the machine more economical.The cold air side also uses the same airflow technology allowing a single unit to cool two areas at the same time with the option to extend the ducting. The dual outlets included as standard give the unit directional airflow as they can be positioned for maximum cooling effect. It’ll easily keep your room cool even with heat-generating equipment on the go.All new for this year is the digital thermostat that allows the user to set the desired temperature and sit back while the unit maintains it. Ideal for use either as a spot cooler or to help regulate temperatures wherever the need arises the MCe6.0 is a fully portable powerhouse that ticks the environmental boxesEssential info . Cooling capacity . 6.47kW Running Current . 8A Supply . 13A 230v Typical Cooled Area . 150m³ Evaporator Airflow (max) . 1198m³/h Condenser Airflow (max) . 1200m³/hHigh efficiency EC fan technologyDigital thermostatic controlLockable castors Weight . 92kg Dimensions . W 52.6 x H 108.6 x D 77.4cm (Including spigot) Cooling Ducting . 2x150mm Exhaust Ducting . 150mmExhaust up to 10m More info . Noise Level dB(A) . 65 Operating Temperatures . 21 - 35°C IP Rating . IP2X Low GWP Refrigerant . R454C (1400g) Max permissible refrigerant pressure . 370 psi2 year warranty full spares availability and technical support View User Manual » .  Please Note The MCe6.0 is a Mono-block portable air conditioning unit. It is connected to a 13 Amp. 230Vac. 50Hz power supply and comes fitted with a fused uk moulded plug. It is recommended that the supply to the machine should be protected by a 30mA RCD. The MCe6.0 is supplied with 2.5m insulated exhaust duct and 2 x 500mm click stop cooling duct. Further ducting available separately.The appliance must be serviced by qualified engineers in compliance with local regulations. The appliance must be switched off and disconnected from the power supply before any work is carried out. An air gap of at least 300mm should be allowed at the front and rear of the unit to ensure a clear airflow. Extension cables should be correctly rated for the load fully unwound and never run through water or over sharp edges.This appliance contains an A2L refrigerant classified as mildly flammable. Always read the user and service manual before operation. The minimal charge within the appliance does not require a minimum room size for safe operation.

What stands out High quality 9kW portable air conditioning unit for commercial spaces up to 220m³Industry-leading use of EC Fan Technology minimise noise output and maximise efficiencyBackward curved impellers push air further and through smaller diameter ductingCool two areas from one unit up to 1.25m per outletFeaturing fully adjustable airflow digital thermostatic control and lockable castors for easy manoeuvrabilityAuto shut off and indicator light on when the condensate tank is full to prevent overflowOver 95% less harmful to the environment using a low global warming potential refrigerant R454C The detailsEffective cooling for your commercial space whether that’s an office or warehouse or spot cooling when you need it the Broughton MCe9.0 is the best at what it does.Building on the legacy of the MCM350 the unit that invented high volume portable cooling the all new MCe9.0 not only promises a massive 9kW of cooling but it does so with today's environmentally conscious user in mind. High efficiency EC fan technology is used to improve fan performance whilst the all new low GWP (global warming potential) refrigerant is 95% less harmful than traditional types ensuring maximum performance with minimum impact.In addition to the environmental credentials the MCe9.0 delivers unrivalled performance. 9kW of cooling from a standard 13A supply and powerful backward curved fans that can exhaust warm air over 10m through of lightweight standard 200mm ducting that's much easier to handle and store than some of the 300-400mm duct that's commonly used.All new for this year is the digital thermostat that allows the user to set the desired temperature and sit back while the unit maintains it. Also featuring fully adjustable airflow auto shut off and indicator light when the condensate tank is full and lockable castors for easy manoeuvrability. Ideal for use either as a spot cooler or to help regulate temperatures wherever the need arises the MCe9.0 is a fully portable powerhouse that ticks the environmental boxesEssential info . Cooling capacity . 8.31kW Nominal Running Current . 10.3A Supply . 13A 230v Typical Cooled Area . 220m³ Evaporator Airflow (max) . 1080m³/h Condenser Airflow (max) . 1800m³/hHigh efficiency EC fan technologyDigital thermostatic controlLockable castors Weight . 95kg Dimensions . W 52.6 x H 119.2 x D 77.4cm (Including spigot) Cooling Ducting . 2x150mm Exhaust Ducting . 200mmExhaust up to 10m More info . Noise Level dB(A) . 65 Operating Temperatures . 15 - 35°C IP Rating . IP2X Low GWP Refrigerant . R454C (1300g) Max permissible refrigerant pressure . 370 psi2 year warranty full spares availability and technical support View User Manual » .  Please Note The MCe9.0 is a Mono-block portable air conditioning unit. It is connected to a 13 Amp. 230Vac. 50Hz power supply and comes fitted with a fused uk moulded plug. It is recommended that the supply to the machine should be protected by a 30mA RCD. The MCe9.0 is supplied with 2.5m insulated exhaust duct and 2 x 500mm click stop cooling duct. Further ducting available separately.The appliance must be serviced by qualified engineers in compliance with local regulations. The appliance must be switched off and disconnected from the power supply before any work is carried out. An air gap of at least 300mm should be allowed at the front and rear of the unit to ensure a clear airflow. Extension cables should be correctly rated for the load fully unwound and never run through water or over sharp edges.This appliance contains an A2L refrigerant classified as mildly flammable. Always read the user and

What stands out High quality 7.4kW portable water cooled split air conditioning unit ideal for server rooms and data centresPlate heat exchanger removes de-rating effect and keeps the sound downIndustry-leading use of EC Fan Technology minimise noise output and maximise efficiencyBackward curved impellers push air further and through smaller diameter ductingFeaturing digital thermostatic control twin louvre directional variable speed control and lockable castors for easy manoeuvrabilityOver 95% less harmful to the environment using a low global warming potential refrigerant R454C The detailsAs a water cooled split the MCSe7.3 is the most efficient and effective form of portable air conditioning available as it removes the de-rating effect of the condenser by using a plate heat exchanger instead. This also helps keep the sound down too as it moves one of the fans outside the area needing cooling.This low GWP version of Broughton’s standard MCWS250 sees it upgraded to meet modern environmental standards while still promising up to 7.4kW of cooling without the need for ducting. This makes the MCSe7.3 ideal for use in data centres especially as the main unit and outdoor section can be up to 35m apart.With digital thermostatic control twin louvre directional and variable speed control the MCSe7.3 can have its air delivery tailored to suit a range of needs while a status panel lets you know what the units is doing at a glance and low temperature operation is also included as standardEssential info . Cooling capacity . 7.4kW Running Current . 12.5A Supply . 13A 230v Main Unit Airflow (max) . 1100m³/h Heat Exchanger Airflow (max) . 3100m³/hIdeal for server rooms and data centresHigh efficiency EC fan technologyDigital thermostatic controlLockable castors Dimensions . W 80.5 x H 130.8 x D 38.2cm Main Cooling Unit Weight . 90kg (wet) Heat Exchanger Weight . 22kg (wet)Easy to fit 3/4” umbilical linesMax Umbilical length 35mStandard 3/4” BSPP fitting More info . Noise Level(Indoor/Outdoor) . 65 / 64 dB(A) Operating Temperatures . 15 - 35°C Max Water Temperature . 50°C Max connection hose length . 35m IP Rating(Indoor/Outdoor) . IP2X / IP24 Low GWP Refrigerant . R454C (750g) Max permissible refrigerant pressure . 370 psi2 year warranty full spares availability and technical support View User Manual » .  Please Note This is a class 1 appliance and must be Earthed. The appliance must be serviced by qualified engineers in compliance with local regulations. The appliance must be switched off and disconnected from the power supply before any work is carried out. An air gap of at least 300mm should be allowed at the front of the unit to ensure a clear airflow. Extension cables should be correctly rated for the load fully unwound and never run through water or over sharp edges. The fan motor on the external heat exchanger is electronically controlled and is liable to start and stop without notice.The system is supplied with a 'water only' test charge. To protect the system from corrosion and frost damage Propylene Glycol must be added prior to use. Damage due to the failure to add Propylene Glycol will invalidate the warranty.The air-conditioning process produces condensate (water) during operation. This condensate is pumped away from the main unit along a flexible clear line within the connecting hose assembly and is deposited to the outside from the bottom of the exterior heat exchanger. Care should be taken when positioning the exterior heat exchanger with regard to this. Do not support the exterior heat exchanger by means of the flexible lines.This

This is a graded product. A2 products have minor visible dents & scuffs. All products are tested and are in good working order. GRADE A2 . Tough powerful and reliable the stylish and versatile VF range really has it all.Designed to keep going there's one to suit every application from garage to warehouse and anything in between.The VF250 is one of a range of 4 ventilation / extraction fans manufactured in the UK by Broughton and are suitable for the most demanding of industrial applications. Constructed with 1.5mm high grade steel bodies they have sickle bladed fans and powerful fully enclosed motors. They are ideal for painters powder coaters construction companies chemical companies and wholesalers. 16A supply for 110v13A supply for 230vDucting availableWeight 12kgDimensions H350 W270 D290mm. .