12 in 1. Forward and reverse with locking action. 1/4 bit holder. The double ended bits are stored in handle for easy storage and convenient use. Sizes include Slot 4, 5, 6mm. PH1, 2, 3. PZ1, 2, 3. Hex 4, 5, 6mm.

9 Piece. For use with hard to reach or recessed fasteners. Set consists of slotted 3, 5, 7mm, PH1, 2, 3, PZ1, 2, 3. Manufactured from chrome vanadium.

Yellow. Features four end bits. Slotted 3, 5mm. PH0, 1. Driver handle manufactured from high quality impact resistant plastic complete with clip.

Blue/pink. 4 Piece. Traditional cabinet pattern handles. Hardened tips and shafts. Consists of Slotted 5 x 75mm, and 6 x 100mm. PH1 x 75mm, PH2 x 100mm.

220mm Wire crimp tool. PVC tape. 40pc 2.5 x 100mm cable ties. 12pc Auto fuses. 4 x 100mm insulated screwdriver. PH1 x 100mm insulated screwdriver. 140mm mains tester with pocket clip. 125mm wire cutter. 5pc heatshrink tube. 125mm primary wire. Fuse puller. 50pc assorted insulated terminals.

Pink. Powerful ratchet type crimping tool for consistent crimping of red, blue, and yellow insulated terminals. Adjustable crimping pressure and ratchet release lever with cushioned grips.

Lens Hood for Nikon AF-S 24-70mm F2.8G ED Lens.

BR-2A fits between the camera and lens to enable reverse mounting of lenses. It is an inexpensive means of obtaining a relatively high reproduction ratio. The BR-2A also increases the working distance for normal or wide-angle lenses. The BR-2A is compatible with lenses that have a 52mm front attachment size.

Compatible with all exposure modes of CPU-controlled Nikon SLRs (P-Type Nikkor), as well as F3HP, FM3A and FM-10. Special silver finish matches silver FM3A & other select SLR cameras. Includes matching HB-35 lens hood, NC filter, plus front & rear lens caps. Seven bladed rounded diaphragm produces more natural out-of-focus highlights. 52mm Filter size.

Ideal for travel, candids and portraits; close focuses to 0.85 feet, weighs only 7.4 ounces. Standard, wide-angle lens for general photography. Exceptionally lightweighs only 7.4 oz. 74-degree angle of coverage lets you take candids, portraits and travel photographs. 52mm Filter size.

An essential part of your system. Reduces stray light and minimizing flare, your pictures show improved contrast & better colour saturation. Hoods also provide important stock protection, should your lens be dropped or bumped. Made of materials that prevent permanent bonding to the lens.

Circular polarizers are specifically designed for use with auto-focus SLR cameras. Designed for use in combination with telephoto lenses equipped with a slip-in filter holder, these filters reduce glare from non-metallic surfaces such as glass and water. Simply turn the rotating ring on the holder to find the most effective position. The filters do not affect autofocus or auto exposure features.

Provide color and contrast enhancement. CPL 62mm Filter for Camera with a 62mm Diameter Lens is ideal camera accessory. Photographic, digital camera filters. Can be used with both auto focus and manual focus cameras and lenses. Reflected light often shows up as whitish glare that washes out color in an image. Remove glare from non-metallic surfaces.

A lens hood is an essential part of your system. By reducing stray light and minimizing flare, your pictures show improved contrast and better colour saturation. Hoods also provide important stock protection, should your lens be dropped or bumped.

HR2 Rubber Hood screws onto the front of the lens. Nikon metal type available for extra strength. Nikon HR2 Rubber Hood is rubber type folds back over the lens when not in use.

PK-13 is an auto extension ring with AI diaphragm coupling. Auto-Extension Rings Nikon extension rings can be used singly or in combination to vary the reproduction ratio of lenses from 20 to 300mm. They are mounted between the camera body and the lens. Through the lens exposure control automatially compensates for lens extension. Manual and aperture-priority auto-exposure control modes are possible Manual focus only.

When mounted between the camera and the lens, this adapter increases the focal length by 2.0 times. Designed for use with AF-S and AF-I Nikkor lenses. Reduces lens aperture by two f-stops. 7 elements in 6-group lens construction assure highest picture quality. Nikon Integrated Coating (IC) reduces flare and ghosting.

A brightly polished, aluminum-clad CT-F1 Trunk Case. The CT-F1 offers solid, sturdy protection for Nikkor lenses and more. Its smooth, straight lines and recessed handle make it easy to stack. Provided with six adaptable interior cushions and one partition. capable of storing Super Telephoto Nikkor lenses in their soft case, as well as camera bodies, Speedlights and other photographic equipment. Cushions & partion can be reconfigured to custom use. Flat Design and recessed handle enable easy vertical/horizontal stacking.

HB-25 Bayonet Hood for Nikon 24-85mm F2.8-4 IF AF-D.

This AF Teleconverter, designed for most AF-S and AF-I NIKKOR lenses provides a 40% increase in lens' focal length. Increases focal length by 1.4x. Reduces lens aperture by one f-stop. 5 elements in 5-group lens construction assure highest picture quality. Full aperture metering with compatible cameras.