This 16-tooth replacement rear sprocket is for the Brompton 2-speed and BWR 6-speed (Shimano), fitted standard on all Brompton 2- and BWR 6-speeds since January 2009.

The 2 Speed Rear Wheel from Brompton is a 28 hole, 2-Speed compatible rear wheel with a double walled rim and a Shimano splined style hub. This wheel can be used with both your single speed Brompton as well as your 2-Speed Brompton, as long as you have a derailleur, all you will need to do is choose the correct sprocket and spacer set you need. The wheel comes supplied with rim tape only.

This replacement rear wheel by Brompton is suitable for 3-speed bikes and has a Brompton/Sturmey Archer 3 standard ratio hub gear.The hub accepts a single sprocket.

Brooks have been making saddles in England for well over 100 years, so who better to ask to commission a beautiful Brompton saddle? Featuring copper-pleated rails and hammered-copper rivets the B17 has a truly classic look. Made from thick leather it moulds to the rider over time creating a personal fit that is super comfortable even for the longer commute.

This is a extended length steel seatpost for a Brompton folding bicycle. It is 60mm longer than the standard length.The extended length Brompton seatpost is designed for the slightly taller rider (as a guide, with an inside leg 33 to 35 inches) - this seatpost gives up to 6cm extra saddle height than the standard Brompton seat pillar.

This Brompton Stainless RR SpokesSet of 28 spokes and nipples is designed for use on Brompton bicycles with a Sturmey Archer rear hub gear equipped rear wheel with single walled rim.

Over time the Brompton seatpost sleeve can wear and will need replacing.

Say Goodbye to punctures and enjoy smooth riding with Kevlar tyres. Kevlar tyres are constructed with a Kevlar belt under the thread for optimal flt protection. Also features a hi - visibility reflective striped sidewall for safety and a fabulous good look.

Fed up of finding the right size Hex Wrench!! The Park Tool Fold-Up Hex Wrench Set combines all the popular hex wrench sizes into one convenient fold-up tool, eliminating the need for a mess of loose tools. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.

Fed up of not being able to find the right size Hex Wrench, LOOK no further!! The Park Tool Fold-Up Hex Wrench Set combines all the popular hex wrench sizes into one convenient fold-up tool, eliminating the need for a mess of loose tools. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.

Fed up of not being able to find the right size Hex Wrench, LOOK no further !! A selection of essential Metric and Imperial hex wrenches in a convenient folding package eliminates the need for a mess of loose tools. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.

Oversized centre hole and thin wall design allows use without removal of cones and locknuts. Thin wall construction allows use without removal of cones and locknuts.

Three hex wrenches in an effective package. Speeds up any job as you have all three hex keys in your hand at any one time. Made from heat treated Bondhus Protanium high torgue steel for a long life.

Fed up of not being able to find the right size hex wrenches in your tool box . Look no further the Park Tool Fold Up Hex Wrench Set combines all the popular hex wrench sizes into one convenient fold-up tool, eliminating the need for a mess of loose tools. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.

The Bottom Bracket tool is used to remove and install external bearing crankset bottom brackets. Fits external bearing bottom brackets with 16 external notches and an outside diameter of approximately 44mm

The Bottom bracket tool is for installing and removing Shimano and ISIS Drive splined twenty-tooth bottom bracket cups. Can be turned with a 3/8 inch drive torque wrench, 3/8 inch ratchet driver, 32mm wrench, 1 inch wrench, or FRW-1 Freewheel Remover Wrench.Made from investment cast steel, the bottom bracket tool utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup

Tool for removing and fitting 6 notch cups on sealed Bottom brackets. It has a long vinyl coated handle providing good leverage and grip. Fits cartridge cups used on Sachs and Campagnolo Veloce, Mirage, and Avanti

Part of a comprehensive range of freewheel and bottom bracket removal tools with an oversized centre hole and thin wall design that allows use without removal of cones and locknuts.

The Bottom bracket tool is used to remove and install external bearing crankset bottom brackets. One end of the bottom bracket tool securely engages the 16 notches of the bottom bracket cups. The other end of the tool engages the 8 internal splines of the crank arm adjustment cap. The Bottom bracket tool fits cups and lockrings with 16 external notches and an outside diameter of approximately 44mm. Warning: this tool has a long handle and it is possible to damage the tool or the component by over-tightening during installation

Calliper Brake wrench, perfect for use on brakes and gears. Made from high strength steel with a nickel plate finish.