The Capture P.O.V. Camera Clip from Peak Design is a harnessing system for a GoPro, similar-sized action camera, or point-and-shoot camera. The system works by clamping around a strap such as the strap of a backpack or life vest, allowing you to use the gear you are already wearing as a camera harmless. The camera is articulated on the harness so that you can still capture from different camera angles, not just pointed straight ahead.Fits nearly any strap up to 3 wideHolds the camera to your body for a low-profile, discreet form factorAllows panning and tilting so that you aren't limited only to a frontal camera angleCan also be used as a handy way to carry your point-and-shootQuick release plate so you can quickly transition to and from hand-held shootingTwisting safety lock can be engaged to prevent accidentally releasing the quick release mechanismIncluded CaptureTool wrench is a special tool for tightening the connecting bolts to ensure the base unit doesn't slip. It can also double as a bottle openerStabilizer Pad included to help absorb vibration from extra bumpy ridesPowdercoated aluminum construction with glass-filled nylon backplate and mounting armsIncludes GoPro J-Arm and universal Point & Shoot Plate with 1/4-20 screw

Protect your camera from water, snow, dust and abrasion, whether it’s in your hands, on the tripod, on your backpack or in your bag. Shell’s unique form-fitting design uses stretchy fabric with a waterproof membrane to keep your camera safe without adding bulk or impeding your workflow. Use Shell with the Capture Camera Clip or any Peak Design strap (sold separately) to keep your camera accessible in any environment.For crop-sensor DSLRs with lens and/or battery grip, such as Canon Rebel and lenses such as a 24-70mm f/2.8.

Protect your camera from water, snow, dust and abrasion, whether it’s in your hands, on the tripod, on your backpack or in your bag. Shell’s unique form-fitting design uses stretchy fabric with a waterproof membrane to keep your camera safe without adding bulk or impeding your workflow. Use Shell with the Capture Camera Clip or any Peak Design strap (sold separately) to keep your camera accessible in any environment.For full-frame DSLRs with lens and/or battery grip, such as a Canon 1D, 7D, 5D, Nikon D5. Lens could be a 70-200mm f/2.8 or 300 mm.

The Peak Design Clutch is a camera hand-strap that quickly connects and disconnects to your camera using an Anchor and a tension clip. The strap that goes around your hand can easily be adjusted with your non-shooting hand to tighten it when walking, and loosen it when you need better access to your controls when shooting.An included Arca-type compatible quick-release plate attaches to your camera's tripod mount, and one of the included anchors is tied into the plate. You simply slide the Anchor into the Link to attach the strap, and slide it out to detach it. To attach the top of the strap to the top of the camera, a custom-designed tension clip acts like a small carabiner. The strap can be adjusted from 7.1 to 11.4.

The CapturePRO Camera Clip with PROplate from Peak Design is a camera holstering system that securely holds your camera without the traditional camera strap. The system is made up of a clip and a PROplate quick release plate, which together can support up to 200 lb. The quick release plate is compatible with all Arca-type clamps. Adapters for Manfrotto RC2 heads are included. With the adapters attached, the PROplate is compatible with Manfrotto RC2 heads that attach to a compatible plate at two points, along the head's locking cam lever and directly across from the lever. These include RC2 heads designed by Manfrotto for still photography. RC2 heads that attach to a plate at three points, along the head's locking cam lever and at two corners opposite the lever are typically incompatible with the PROplate with RC2 adapters. Such heads with a three-point connection frequently appear in Manfrotto RC2 video heads. The clip can attach to any backpack strap, bag, or belt less than 3 wide. It is ideal for photographers who need their hands free and also need instant access to their camera.To use the system, attach the quick release plate to your camera, clamp the clip around a strap or belt and secure in place by tightening the two hand-tightened bolts. Your camera slides into the clip, locks in place, and will not detach until you push the quick release button to release it from the clip.The CapturePRO Camera Clip can also be mounted directly to a tripod or monopod and be used as a quick release clamp. It features a 3/8-16 thread and a 3/8-16 to 1/4-20 reducer bushing is included.The CapturePRO Camera Clip with PROplate also comes with a 4mm hex wrench for securely installing your plate on the camera, four attachment screws for the RC2 adapters, and a microfiber pouch for storing your clip when it is not in use.A safety lock can be activated by turning the release button, preventing accidental release and theft.4 corner-mounted Anchor connection points for Peak Design camera straps.Injection-molded rubber pads on the quick release plates mold to the bottom of your camera and prevent your camera from twisting during use.A plate locking-knob tightens down onto the plate for extra rigidity and for point-of-view video.Your camera can lock into the CapturePRO in multiple directions allowing you to easily change lenses.All parts are made of corrosion resistant and weatherproof materials.

Based on their Capture Camera Clip, the Peak Design CaptureBINO eliminates uncomfortable or potentially harmful swing common with conventional neck straps and lets you carry any pair of binoculars directly on your backpack strap, belt or bag up to 3 wide and 1/2 thick.A quick-release locking system lets you access your binocular with the click of a button. This mounting and carrying system works with any binocular equipped with a standard 1/4-20 mount and the binocular adapter is also Arca-type compatible to use with tripods for your long observation sessions. The Clip is made of lightweight and durable fiberglass reinforced nylon, and the binocular adapter is constructed from an aluminum alloy with a powder-coat finish.Fits Straps 3 wide x 0.5 thick1/4-20 Binocular Tripod MountQuick-Release Locking SystemAttaches to Arca-type MountsPowder-Coated Aluminum AlloyFiberglass Reinforced Nylon

Protect your camera from water, snow, dust and abrasion, whether it’s in your hands, on the tripod, on your backpack or in your bag. Shell’s unique form-fitting design uses stretchy fabric with a waterproof membrane to keep your camera safe without adding bulk or impeding your workflow. Use Shell with the Capture Camera Clip or any Peak Design strap (sold separately) to keep your camera accessible in any environment.For a small mirrorless, such as a Sony NEX, A7 series or Micro 4/3, and also a crop-sensor DSLR such as a Canon Rebel, Nikon - but without a battery grip and only for small lens.

The Capture Camera Clip V2 from Peak Design is a camera holstering system that securely holds your camera without the traditional camera strap. The system is made of up a clip and a quick release plate, which together can support up to 100 lb. The quick release plate is compatible with all Arca-type clamps. The clip can attach to any backpack strap, bag, or belt less than 3 wide. It is ideal for photographers who need their hands free and also need instant access to their camera.To use the system, attach the quick release plate to your camera, clamp the clip around a strap or belt, and secure in place by tightening the two hand-tightened bolts. Your camera slides into the clip, locks in place, and will not detach until you push the quick release button to release it from the clip.The CapturePro comes with a 4mm hex wrench for securely installing your plate on the camera and a microfiber pouch for storing your clip when it is not in use.The quick release plate is compatible with any Arca-type head.A safety lock can be activated by turning the release button, preventing accidental release and theft.A plate locking-knob tightens down onto the plate for extra rigidity and for point-of-view video.All parts are made of corrosion resistant and weatherproof materials.The standard plate has dovetails on all four sides so that your camera can be mounted in the clip in any direction, making changing the lens an easy task.There are four holes in the corners of the plate for attaching Micro Anchors for Peak Design's Leash and Cuff.

Store your small camera accessories or cables in the heritage tan Field Pouch from Peak Design. Further organize your gear by utilizing the interior slip pockets and take advantage of the attachment point for Peak Design's Capture.Keep your pouch in your bigger bag, or use the seatbelt style belt loops to wear on your belt. You can also attach the pouch to any Peak Design strap (sold separately) turning it into a lightweight sling bag. The felt padding provides light protection from everyday use, while the weather-resistant waxed 500D Kodra shell helps safeguard your gear from a sudden change in weather.

The black Slide from Peak Design is an adjustable camera strap that can be worn as a sling, shoulder, or neck strap. It features Peak Design's unique Anchor Link system to quickly attach and detach the strap from your camera. Two latches on the strap allow for one-handed adjustment to the strap's length from 39 to 54.To wear the Slide as a sling-style strap, one side of the strap attaches to the included Arca-type compatible QR plate on the bottom of the camera, and the other attaches to the standard strap loop on the top. One side of the strap is smooth, so that you can easily slide your camera up to your eye when using the strap as a sling. The other side has a gripped surface for using the Slide as a shoulder or neck strap. The Slide is compatible with all versions of Peak Design's Capture camera clips.Sling, Shoulder, or Neck StrapQuick-Connecting Anchor Link SystemReversible Smooth and Gripped SurfacesArca-Type Compatible QR PlateFour Anchors

The Slide Summit Edition - Tallac from Peak Design is the most versatile pro camera strap in the world. Anchor Link quick-connectors let you wear Slide as a sling, neck or shoulder strap. Seatbelt-style webbing with internal padding has smooth and grippy sides, letting it glide over any clothing or stay put exactly where you want it: back, hip or front.Works with any cameraSturdy and padded for use with full frame DSLRs with large lenses, but low-profile enough for smaller mirrorless cameras. Attaches to any camera's strap loops or tripod socket using included ARCA-compatible tripod plate.3 Straps In 1Sling StrapConnect Slide to Anchors on the strap lug and tripod socket and wear it as a quick-cinching sling strap that glides over your clothing.Neck StrapThe classic configuration. Attach Slide to both strap lugs and you've got a clean, classic-looking neck strap.Shoulder StrapIn a hurry? Flip the strap over and you've got a silicon grip that lets you quickly hang your camera over your shoulder.

The Slide Lite Camera Strap SLL-1 from Peak Design is an adjustable camera strap that can be worn as a sling, shoulder, or neck strap. It features Peak Design's unique Anchor Link system to quickly attach and detach the strap from your camera. Two latches on the strap allow for one-handed adjustment to the strap's length. Designed for mirrorless cameras, this SLL-1 model strap offers a thinner 1.25 width and is shorter and lighter than the SL1 strap.To wear the Slide as a sling-style strap, one side of the strap attaches to the included Arca-type compatible QR plate on the bottom of the camera, and the other attaches to the standard strap loop on the top. One side of the strap is smooth so that you can easily slide your camera up to your eye when using the strap as a sling. The other side has a gripped surface for using the Slide as a shoulder or neck strap. The Slide is compatible with all versions of Peak Design's Capture camera clips.

Store your small camera accessories or cables in the charcoal Field Pouch from Peak Design. Further organize your gear by utilizing the interior slip pockets and take advantage of the attachment point for Peak Design's Capture. Keep your pouch in your bigger bag, or use the seatbelt style belt loops to wear on your belt. You can also attach the pouch to any Peak Design strap (sold separately) turning it into a lightweight sling bag. The felt padding provides light protection from everyday use, while the weather-resistant waxed 500D Kodra shell helps safeguard your gear from a sudden change in weather.

The Slide Camera Strap SL-L-2 from Peak Design is an adjustable camera strap that can be worn as a sling, shoulder, or neck strap. It features Peak Design's unique Anchor Link system to quickly attach and detach the strap from your camera. Two latches on the strap allow for one-handed adjustment to the strap's length from 39 to 54. To wear the Slide as a sling-style strap, one side of the strap attaches to the included Arca-type compatible QR plate on the bottom of the camera, and the other attaches to the standard strap loop on the top. One side of the strap is smooth so that you can easily slide your camera up to your eye when using the strap as a sling. The other side has a gripped surface for using the Slide as a shoulder or neck strap. The Slide is compatible with all versions of Peak Design's Capture camera clips.