
2.99 £
Hozelock Watering
Double ended male connector which will allow two lengths of hose equipped with female connectors to be joined and separated quickly. For use with Hozelock fittings

3.99 £
Hozelock Watering
Three way connector which allows the hose to branch into two directions. For use with Hozelock fittings

4.99 £
Hozelock Watering
Use the Hozelock Hose Adaptor to convert the male outlet to 3/4 screw thread (e. G. to allow the fitting of a Tap Timer or Pressure Regulator on the outlet side). For use with Hozelock fittings

20.99 £
Hozelock Watering
All-plastic Double Check Valve for use on outside taps to prevent backflow siphonage of contaminated water into the mains. Suitable for all 1/2 inch BSP, 5/8 inch BSP and 3/4 inch BSP threaded taps and approved by the water research council. For use with Hozelock fittings

7.99 £
Hozelock Watering
Hozelock tap connector designed to attach a hose to a wide variety of square, round and mixer taps up to 43mm high by 34mm wide. Complete with a choice of sealing washers to provide a leak-free connection. For use with Hozelock fittings

5.99 £
CK Tools
CK Brass Interlock Adjustable Spray Nozzle - CK brass adjustable spray nozzle varies flow from off through spray to hard jet.

5.99 £
CK Tools
Y shaped brass hose connector to connect three

9.99 £
Sunmate
Sunmate Brass

5.49 £
Hozelock Watering
Hozelock Tap Connector to attach a hose to round or oval spout taps with a maximum diameter of 18mm. The connector is sealed to the tap by tightening the clip. For use with Hozelock fittings

27.99 £
Sunmate
Sunmate Hose Tap Manifold

4.99 £
Draper Tools
Draper 1/2 Brass Hose Connector

3.99 £
Draper Tools
Draper Brass Hose Repair

4.99 £
Hozelock Watering
New quick-connect hose connectors are a step ahead of all the others. The Aquastop connector has an internal valve that stops the water flow when an accessory (e.g. a spray gun) is disconnected. This saves you having to go back to the tap to turn the water off when you are switching between accessories. It also helps you save water in the garden because it stops the water flow so less water is wasted. Suitable for use with all 19mm 3/4 and 15mm 5/8ths hose. All internal parts are made from ultra tough engineering plastics for a long leak free life. The connection to the tap is guaranteed secure up to 10 bar, thanks to a triple locking system. The sleeve is easy to use even when wet because of the twin soft touch pads. The hose is firmly connected thanks to barbs that connect with the inside and outside of the hose. Hose kinking , hose swelling, and hose leaking at the connection point with the fitting is virtually eliminated due to the ingenious flexible hose-tail on the nut.

5.99 £
Draper Tools
Draper Brass Autostop Connector from Draper Expert is a 1/2 hose connector with water stop.

2.99 £
CK Tools
CK Double Male Connector

6.99 £
Hozelock Watering
For repairing damaged hose, or permanently connecting two lengths of hose, the Pro Metal Hose Repair Connector is made from Nickel Plated Brass which ensures a strong and durable connection. Scratch and frost resistant, the Pro Metal Hose Repair Connector comes with a 3 year guarantee.

5.99 £
Hozelock Watering
Pro-Metal double ended male connector allowing two lengths of hose equipped with female connectors to be joined. Made from Nickel Plated Brass which ensures a strong and durable connection. Scratch and frost resistant, the Pro Metal Double Male Connector comes with a 3 year guarantee.

20.99 £
Draper Tools
Draper Brass Double Tap Connector

8.49 £
Hozelock Watering
Attach the Hozelock Indoor Threaded Tap Connector onto your indoor tap to connect your hose. Hozelock Indoor Threaded Tap Connector can be used on modern kitchen taps that have a built in aerator cartridge. This tap connector provides a secure method of temporarily attaching a Hozelock connector to a kitchen tap. Simple to use: remove the existing aerator cartridge from the end of the tap, and then screw in the new Hozelock cartridge. The new cartridge protrudes by an extra 8mm - there is a 3/4 bsp thread on the protrusion. Screw the Hozelock Indoor Threaded Tap Connector onto the 3/4 bsp thread when you want to connect the hose to the tap. Also included in the pack is a tap connector.

5.49 £
Hozelock Watering
Hozelock Pro Metal Hose End Connector with scratch-resistant zinc die-cast sleeve and anti-kink flexible hose tail. Thanks to a triple locking system, the connection to the tap is guaranteed secure up to 10 bar - which is ten times more pressure than the water companies are required by statute to deliver to a residential property. Suitable for use with all 12.5mm 1/2 and 15mm 5/8ths hose. All internal parts are made from ultra tough engineering plastics for a long leak free life.