Philips Master PL-H Single Ended 4 Pin 120w colour 840 lamp complete with a 2G8 base. This PL-H lamps has the following benefits :- Very high light output, High energy efficiency, Push and turn 2G8 lamp holder and instant white light and hot restrike. These PL-H lamps are usually used in medium and high bay enviroments such as shops and shopping centres, airport arrival an departure areas, railway and bus stations.

This PCA 1x21/39 T5 ECO is a low profile, dimmable high frequency ballast to run: 1 x 21w or 39w 849mm T5 fluorescent tube. This ballast replaces the Tridonic PCA 1/21 T5 Eco and 1/39 T5 Eco ballasts.

The Tridonic PCA 1/35/49/80 T5 ECO is a low profile, dimmable high frequency ballast to run: 1 x 35w, 49w or 80w T5 Tube. This ballast replaces the old Tridonic PCA 1/35 T5 Eco, 1/49 T5 Eco and 1/80 T5 Eco ballasts.

The Tridonic PCA 2x35/49 T5 ECO is a low profile, dimmable high frequency ballast to run: 1 x 35w, 49w or 80w T5 Tube. This ballast replaces the old Tridonic PCA 2/35 T5 Eco and 2/49 T5 Eco ballasts.

This is a Sylvania 250w SON-T Gro-Lux lamp specially designed to help stimulate plant growth. These lamps are commonly known as grow lamps or Lucalox PSL lamps.This lamp requires a SON Ballast and super-imposed ignitor.

The Tridonic PCI 70 CO21. PCI 70 CO21 ballasts are used to run: 1 x 70w Metal Halide Lamp Tridonic Article Number: 86458607

T5 Modular Fitting 2 x 54W ideal for use in offices, reception areas, retail areas and other commercial premises. Features include high frequency control gear.(Dimensions: Length - 1195mm. Width - 295mm. Depth - 55mm.) Does not come complete with lamps.

The Existalite ZW.3G/B is an emergency inverter compatible with all well known branded high frequency ballasts and has been designed to operate at optimum battery voltages. They have an emergency duration of 3 hours as standard and have a recharge period of just 20 hours. The ZW.3G/B should be used with a 5 cell battery pack. Click here to see Data Sheet and Wiring Diagrams!

The Existalite ZW.3G/C is an emergency inverter compatible with all well known branded high frequency ballasts and has been designed to operate at optimum battery voltages. They have an emergency duration of 3 hours as standard and have a recharge period of just 20 hours. The ZW.3G/C should be used with a 5 cell battery pack. Click here to see Data Sheet and Wiring Diagrams!

This is a fused, quad 36w high frequency, complete gear tray to run 4 x 36w 4ft T8 Fluorescent Tube. This gear tray comes complete with a branded high frequency ballast, T8 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded ballasts and are 100% tested before we send them out.

This is a fused, quad 58w high frequency, complete gear tray to run 4 x 58w 5ft T8 Fluorescent Tube. This gear tray comes complete with a branded high frequency ballast, T8 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded ballasts and are 100% tested before we send them out.

This is an 70W T8 Fluorescent Batten Fitting. This fitting is a steel construction with a powder coated finish. It comes complete with a high frequency ballast and flurescent tube starter. This fitting does not include the lamp. Length: 104mm , Width: 1791mm , Depth: 62mm

Venture HSZ073226X7 Parmar Ballast is a 60hz ballast suitable for use with High Pressure Sodium,Metal Halide and Ceramic Metal Halide lamps.This ballast runs 1 x 70w lamp. This ballast has a metal base and enclosure, 2.5mm terminal block, microprocessor controlled, remotely operated up to 25m, accepts 0.75mm to 2.mm solid stranded cable.

This Philips HF-R 258 TL-D dimmable ballast runs a 2 x 58w T8 fluorescent tubes. This ballast's lamp power can be regulated from 1% to 100%, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up.

This is a fused, triple 70w high frequency, complete gear tray to run 3 x 70w 6ft T8 Fluorescent Tube. This gear tray comes complete with a branded high frequency ballast, T8 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded ballasts and are 100% tested before we send them out.

The Tridonic PCA 2x26/32/42 TC ECO is a high frequency dimmable ballast to run:   2 x 26w Double Turn Compact Fluorescent Lamps 2 x 26w Triple Turn Compact Fluorescent Lamps 2  x 32w Triple Turn Compact Fluorescent Lamps 2 x 42w Triple Compact Fluorescent Lamps   Tridonic part number: 22185121

The Osram QT-FC 1x55/220-240 is a non dimmable high frequency ballast to run 1 x 55w circular T5 fluorescent lamp.

Venture HSA252232CH Parmar Ballast is a 50hz ballast suitable for use with Metal Halide lamps.This ballast runs 1 x 250w lamp. This ballast has a metal base and enclosure, 2.5mm terminal block, microprocessor controlled, remotely operated up to 25m, accepts 0.75mm to 2.mm solid stranded cable.

This is an Emergency Lighting Products (ELP) ECK/535/T5/TI emergency module to operate a range of lamps with wattages between 11 and 42w. This module comes complete with a 5 cell emergency battery. This module has been designed to suit all emergency lighting applications that require an inverter and battery. It has compact dimensions and push-wire/IDC terminals to simplify assembly. This Kit Comes complete with 3 Cell battery, battery feet and emergency LED indicator

This is an Emergency Lighting Products (ELP) ECK/524-49/T5/TI 24-49w emergency module to operate a range of lamps with wattages between 24 and 49w. This module comes complete with a 5 cell emergency battery. This module has been designed to suit all emergency lighting applications that require an inverter and battery. It has compact dimensions and push-wire/IDC terminals to simplify assembly. This Kit Comes complete with 5 Cell battery, battery feet and emergency LED indicator