2 x 58w 5ft T8 IP65 Rated HF 240v led ready. These IP rated fittings offer high ingress protection from moisture, dust, corrosion and vandalism.This unit does not included lamps.

Venture HMA35223221 Parmar Ballast is a 50hz ballast suitable for use with Metal Halide lamps.This ballast runs 1 x 350w lamp. This ballast has a metal base and enclosure, 2.5mm terminal block, microprocessor controlled, remotely operated up to 25m, accepts 0.75mm to 2.mm solid stranded cable.

The Tridonic PC 2x18-4 TC COMBO is an electronic combination ballast and emergency lighting unit to run 2 x 18w compact fluorescent lamp. It has a 3 hour rated duration and should be used with a 4 cell battery pack. Tridonic article number: 89899928

The Tridonic PC 2x26-3 TC COMBO is an electronic combination ballast and emergency lighting unit to run 2 x 26w compact fluorescent lamps. It has a 3 hour rated duration and should be used with a 3 cell battery pack. Tridonic article number: 89899984

A 55 Watt low pressure sodium SOX PLUS lamp with a BC (By22d) cap. These lamps have an extremely high efficiency and emit a yellow light. They are frequently used for road lighting, crossings, airports, docks, quarries and security lighting etc. The SOX PLUS lamp has a uniform sodium distribution in the discharge tube through dimples for a more stable discharge resulting in higher efficiency and better lamp life.

A 55 Watt SOX low pressure sodium lamp with a BC (By22d) cap. SOX lamps have an extremely high efficiency and emit a yellow light. SOX Lamps are frequently used for road lighting, crossings, airports, docks, quarries and security lighting etc.

G36T5 36w T5 Germicidal Tube. This T5 Germicidal tube has a single pin cap and 9,000 hr lamp life.

8w 240V Maintained Fitting - Blade. This 8w 240v maintained fitting comes complete with a T5 8w fluorescent tube,Nickel cadmium 2.4v 4.5 ah, 3hr emergency duration,24hr recharging time, running person arrow down included, body = steel and the legend is polycarbonate.

An Emergency Lighting Products (ELP) IM418 emergency combination ballast to run 1 x 13 or 18w double or triple compact fluorescent lamp. This integrated combination ballast should be used with a 4 cell emergency battery. This ballast has a high quality electronic ballast and emergency inverter within the same enclosure.

An Emergency Lighting Products (ELP) IM526 emergency combination ballast to run 1 x 18 or 26w double or triple compact fluorescent lamp. This integrated combination ballast should be used with a 5 cell emergency battery. This ballast has a high quality electronic ballast and emergency inverter within the same enclosure.

Venture PB600K255 Impulser Standard Ignitor. This Ignitor is capable of igniting a 600w SON and Metal Halide Lamps. The Venture part number is PB600K255.

This is a Quad 15w switch start, complete gear tray to run 4 x 15w 18inch T8 Fluorescent Tube. This gear tray comes complete with switch start choke, starter, capacitor, T8 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded chokes and are 100% tested before we send them out

The Tridonic PCA 2x28/54 T5 ECO is a low profile, dimmable high frequency ballast to run: 2 x 28 Watt or 54 Watt T5 fluorescent tubes. Tridonic article number: 22176244

This is a Quad 18w switch start, complete gear tray to run 4 x 18w 2ft T8 Fluorescent Tube. This gear tray comes complete with switch start choke, starter, capacitor, T8 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded chokes and are 100% tested before we send them out

The GE BLS/E/35w/CMH is an electronic ballast to run 1 x 35w metal halide lamp.GE part code : 73359.

The GE BLS/E/70w/CMH is an electronic ballast to run 1 x 70w metal halide lamp.GE part code : 73358.

This is a fused, quad 24w high frequency, complete gear tray to run 4 x 24w HO T5 Fluorescent Tube. This gear tray comes complete with a branded high frequency ballast, T5 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded ballasts and are 100% tested before we send them out.

This is a fused, quad 39w high frequency, complete gear tray to run 4 x 39w HO T5 Fluorescent Tube. This gear tray comes complete with a branded high frequency ballast, T5 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded ballasts and are 100% tested before we send them out.

This is a fused, quad 49w high frequency, complete gear tray to run 4 x 49w HO T5 Fluorescent Tube. This gear tray comes complete with a branded high frequency ballast, T5 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded ballasts and are 100% tested before we send them out.

The Helvar EL SC 1x14HFC now a Helvar EL1x14sc is a dimmable high frequency ballast is to run 1 x 14w T5 fluoresent tube. They can be dimmed from 1-100%, extremeley low energy consumption, Flicerless light, Optimum cathode control and simultaneous lighting control by switch-control and analog control.