The Osram QTi 2x80/220-240 DIM is a 1-10v intelligent dimmable ballast to run 2 x 80w T5 Tubes. These ballasts have an average life of 100,000 hours, offer flicker free light, have an automatic safety shutdown at lamp failure, automatic restart after lamp replacement and are suitable for emergency lighting.

The Tridonic PC 2x36-33 TCL Combo is a combination ballast and emergency lighting unit to run 2 x 36w PL-L lamp. It has a 3 hour rated duration and should be used with a 3 cell battery pack. Tridonic article number: 89899921

The Tridonic PC 2x40-34 TCL Combo is a combination ballast and emergency lighting unit to run 2 x 40w PL-L lamp. It has a 3 hour rated duration and has a 4 cell battery pack. Tridonic article number: 89899923

The Tridonic PC 2x55-35 TCL Combo is a combination ballast and emergency lighting unit to run 2 x 55w PL-L lamp. It has a 3 hour rated duration and should be used with a 5 cell battery pack. Tridonic article number: 89899925

A 90 Watt low pressure sodium SOX PLUS lamp with a BC (By22d) cap. These lamps have an extremely high efficiency and emit a yellow light. They are frequently used for road lighting, crossings, airports, docks, quarries and security lighting etc. The SOX PLUS lamp has a uniform sodium distribution in the discharge tube through dimples for a more stable discharge resulting in higher efficiency and better lamp life.

A 90 Watt SOX low pressure sodium lamp with a BC (By22d) cap. SOX lamps have an extremely high efficiency and emit a yellow light. SOX Lamps are frequently used for road lighting, crossings, airports, docks, quarries and security lighting etc.

 250w M.H. Floodlight - Black- TUV certified gear all floodlights are die-cast aluminium measurements: Length 428mm Width 423mm Depth 139mm.(Does not come complete with lamp)

The Osram QTI 2x35/49/80 /230-240 is a dimmable high frequency ballast to run: 2x 35w,49w & 80w T5 lamps. These ballasts have an average lifetime of 100,000 hours They offer flicker free light, have an automatic safety shutdown at lamp failure, automatic restart after lamp replacement and are suitable for emergency lighting.

PLL Commercial Modular Fitting 4 x 14w (600x600mm) ideal for use in offices, reception areas and other commercial premises. This fitting comes complete with a white glossy powder coated finish, is IP20 rated, the fitting also includes high frequency control gear and is to be used in 15-24mm exposed T ceilings.(Dimensions: Length - 595mm. Width - 595mm. Depth - 95mm.) Does not come complete with lamps.

The Lite-Plan HRN/T5/6/28+54 Module is a 3hr emergency lighting module. Specifically designed for use with 28w & 54w T5 fluorescent lamps.4-pole change over relay plus additional 5th pole for HF ballast isolation. This Lite-Plan conversion kit has the following benefits :- Specific T5 lamp calibration to maximise BLF%, 4 pole changeover relay, additional 5th pole relay, Deep discharge protection, Low profile enclosure, constant current charger and high temperature NiCd cells.

The Philips HID-PV Cx2x35 35/S CDM electronic ballast runs 2x35w metal halide lamps.this ballast is for use in luminaire, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

The Philips HID-PV C35 35/S CDM electronic ballast runs 1x35w metal halide lamps.this ballast is for use in luminaire, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

The Philips HID-PV Cx2x70 370/S CDM electronic ballast runs 2x70w metal halide lamps.this ballast is for use in luminaire, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

The Philips HID-PV C 70 /S CDM electronic ballast runs 1x70w metal halide lamps.this ballast is for use in luminaire, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

The Philips HID-PV C 150 /S CDM electronic ballast runs 1x150w metal halide lamps.this ballast is for use in luminaire, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

PCA 2/26 TCD EXCEL one4all - This PCA 2/26 TCD EXCEL one4all is an addressable and dimmable high frequency ballast to run: 2 x 26 Watt double turn compact fluorescent lamps

Venture HIE 250W/V/PS/4K is a 250 watt Enclosed Rated Uni - Form Pulse start Metal Halide Venture lamp.This lamp has an average life of 15,000 hours and are supplied with a clear finish. This lamp has a giant screw cap and the colour is 4000k. Venture part number is 18980

Venture HIE 250W/C/V/PS/4K is a 250 watt Enclosed Rated Uni - Form Pulse start Metal Halide Venture lamp.This lamp has an average life of 15,000 hours and are supplied with a coated finish. This lamp has a giant screw cap and the colour is 4000k. Venture part number is 61513

Venture HIE 250W/C/V/H75/PS/4K is a 250 watt Enclosed Rated Uni - Form Pulse start Metal Halide Venture lamp.This lamp has an average life of 15,000 hours and are supplied with a coated finish. This lamp has a giant screw cap and the colour is 4000k. Venture part number is 91947

Venture HIE 400W/V/PS/4K is a 400 watt Enclosed Rated Uni - Form Pulse start Metal Halide Venture lamp.This lamp has an average life of 20,000 + hours and are supplied with a clear finish. This lamp has a giant screw cap and the colour is 4000k. Venture part number is 92008