Economy 8w - 3hr - 240V Non Maintained Fitting.This 8w non maintained fitting comes complete with screw down diffuser, Polycarbonate body & diffuser, white base and prismatic diffuser, 6 x 20mm knockouts for additional functions, 8w T5 fluorescent lamp included, designed BE EN 60598 -2 -22, emergency lumens = 96 lumens and ballast lumen factor = 0.24.

This is a fused, twin 24w high frequency, complete gear tray to run 2 x 24w HO T5 Fluorescent Tube. This gear tray comes complete with a branded high frequency ballast, T5 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded ballasts and are 100% tested before we send them out.

Venture HIT 70W/G12/UVS/3K is a 70 watt Enclosed Rated Single Ended G12 Metal Halide Venture lamp.This lamp has an average life of 10,000 hours and are supplied with a clear finish. This lamp has a G12/BiPin cap and the colour is 3000k. Venture part number is 12108.

Venture HIT 150W/G12/UVS/4K is a 150 watt Enclosed Rated Single Ended G12 Metal Halide Venture lamp.This lamp has an average life of 10,000 hours and are supplied with a clear finish. This lamp has a G12/BiPin cap and the colour is 4200k. Venture part number is 25779.

Venture HIT 150W/G12/UVS/3K is a 150 watt Enclosed Rated Single Ended G12 Metal Halide Venture lamp.This lamp has an average life of 10,000 hours and are supplied with a clear finish. This lamp has a G12/BiPin cap and the colour is 3000k. Venture part number is 12106.

Venture PB055K245 2 Wire Parallel Ignitor. This Ignitor is capable of igniting a 35w - 55w SOX Lamps.This is a timed ignitor and the Venture part number is PB055K245.

28W Square Black/Clear Trojan FH27028-B-CL, this emergency light fitting is IP65 weatherproof and has switch start and comes complete with a 28W GE wattmiser lamp.

The Tridonic PC 1/9/11 TCS PRO is a non-dimmable high frequency ballast to run: 1 x 9 Watt single turn compact fluorescent lamp 1 x 11 Watt Single turn compact fluorescent lamp. Click here to see Data Sheet and Wiring Diagrams!

A 100 Watt 8ft T12 (PET) Polyethylene Terephthalate Shatterproof Coversafe Fluorescent Triphosphor Tube.These T12 tubes are covered with a heat sealed coating that is used to prevent high risk solutions within any industry. This T12 fluorescent tube/lamp has an average life of 15,000 hours and has an A class energy efficiency rating.

Clalight CLT WS 3S 18 230 AL1 High frequency ballast. This is a non-dimmable Sylvania/Clalight branded high frequency ballast to run: 3 x 18 T8 fluorescent tubes

An Encapsulite 1800mm DDP (deep dyed polycarbonate) sleeve for use with a 70w T8 Tube. These sleves are fade free and are suitable for use in temperatures from -90 to +120 degrees celsius. Encapsulite sleeves are CE, WEEE and ROHS compliant. Fluorescent Tube not included.

This is a 900mm white Lantern pole, this pole is made from cast aluminium housing and has a (B22) Bayonet Cap lampholder. This fitting does not come complete with lamp.

This is a 16w 2D Polo Fitting White Base/Chrome Trim.Can either a white or chrome trim. High frequency electronic . B ulkheads can be installed either indoors and outdoors - in corridors, on external walls or on ceilings. Dia: 265 x H: 90mm . Lamp is not included needs a 2D 4 pin lamp.

CDM Elite-T 35w 930 G12 are a 35 watt warm white single ended ceramic metal halide discharge lamp, they have increased light output compared to regular MASTERClour lamps, High efficacy and long lifetime for lowest operating cost and low heat generation. Average life of 12000hrs.

CDM Elite-TC 35w 930 G8.5 are a 35 watt warm white single ended ceramic metal halide discharge lamp, they have increased light output compared to regular MASTERClour lamps, excellent colour quality remains stable over lifetime. 

This is a Philips SN 61 superimposed pulse, digitally controlled ignitor for SON/MH lamps.

This is a Bell Aqua 28w 2D fitting complete with satin ring. This fitting is IP65 rated and comes complete with a high frequency ballast and 28w 2D lamp.

The Helvar EL1x70HF, now a Helvar EL1x70s is a non-dimmable high frequency ballast to run 1 x 70w T8 fluoresent tube.

This is a 240v splitter box with 4 x 16A sockets. This is designed to split a single line into 4 seperate outputs meaning you can have multiple power access from a single supply. Image is for illustration purposes only, splitter box supplied may be blue.

The Philips HF-P 3/414 TL5 is a fixed output high frequenct ballast for use with 3/4 x 14w flourescent lamp. This ballast has a flicker free warm start, electrode heating cut off, Low energy consumption and automatic stop circuit (stop start). The Philips HF-P is often used in Department stores, Airports, Railway stations, Hotels and Hospitals. It is also suitable for emergency installations.