This is a Sylvania Foodstar fresh 21w T5 tube. These Foodstar lamps are specially designed to compliment the colour of the fruit and veg and illuminates the fruit/veg in its optimum colour. These tubes are often used in grocery shops.

Halogen SK15s Infrared Heater Lamp 1000W Ruby Red 235V are used in heating applications. Diameter: 10.5mm Overall length: 353mm Average life: 5000 Stunden

Halogen SK15s Infrared Heater Lamp 1200W Ruby Red 235V are used in heating applications. Diameter: 10.5mm Overall length: 353mm Average life: 5000 Stunden

Venture PXE150485 Superimposed Standard Ignitor. This Ignitor is capable of igniting a 600w - 2000w SON and Metal Halide Lamps. The Venture part number is PXE150485.

This is an Emergency Lighting Products (ELP) OM/336/TI emergency module to operate a range of lamps with wattages between 4 and 36w. This module should be used with a 3 cell emergency battery. This module has been designed to suit all emergency lighting applications that require an inverter and battery. It has compact dimensions and push-wire/IDC terminals to simplify assembly.

This is an Emergency Lighting Products (ELP) OM/458/TI emergency module to operate a range of lamps with wattages between 4 and 58w. This module should be used with a 4 cell emergency battery. This module has been designed to suit all emergency lighting applications that require an inverter and battery. It has compact dimensions and push-wire/IDC terminals to simplify assembly.

This is an Emergency Lighting Products (ELP) OM/570/TI emergency module to operate a range of lamps with wattages between 4 and 70w. This module should be used with a 5 cell emergency battery. This module has been designed to suit all emergency lighting applications that require an inverter and battery. It has compact dimensions and push-wire/IDC terminals to simplify assembly.

Philips Master PL-H Single Ended 4 Pin 85w colour 840 lamp complete with a 2G8 base. This PL-H lamps has the following benefits :- Very high light output, High energy efficiency, Push and turn 2G8 lamp holder and instant white light and hot restrike. These PL-H lamps are usually used in medium and high bay enviroments such as shops and shopping centres, airport arrival an departure areas, railway and bus stations.

Osram Quicktronic De Luxe HF DIM (1-10V) 1 X 36W T8 Dimming ballast for T8 fluorescent tubes.

This is a 28w 2D Polo Shadow Fitting Clear Base/Opal Diffuser. Can be fitted to indoor and outdoor wall or ceiling surfaces. It has an opal diffuser, white trim and clear polycarbonate base. It also comes with red, blue, green and amber filters which, when wall or ceiling-mounted, create a colourful shadow effect, adding to the fitting. D ia: 320 x H: 100mm. Lamp is not included.

CDM Elite-T 150w 930 G12 are a 150 watt warm white single ended ceramic metal halide discharge lamp, they have increased light output compared to regular MASTERClour lamps, High efficacy and long lifetime for lowest operating cost and low heat generation. Average life of 12000hrs.

A 20 Watt HCI-TC Ceramic Metal Halide lamp with a G8.5 base. This HCI-TC lamp is a compact, single-ended discharge lamp with a high efficiency. HCI-TC lamps maintain stable colour over their lifetime and emit a crisp, sparkling, light. HCI-TC lamps are frequently used in shops, shop windows, public buildings and offices. HCI-TC's can also be used outdoors for floodlighting and pedestrian areas. This lamp is available in colours 830(warm white) and 942(cool white). Boxed in 12's. Product no:683007

This is an 240v, 38w, 2D 4 Way Wilson Fitting White Base/Opal Diffuser. It is powder coated steel and also has a 3 hr emergency back-up available Electronic ballast. D ia: 435 x D: 110mm. The lamp is not included with this.

Venture PXA070255 Superimposed ATEX Approved Ignitor . This Ignitor is capable of igniting a 35w - 70w SON and Metal Halide Lamps. The Venture part number is PXA070255.

This is a single 100w switch start, complete gear tray to run 1 x 100w 8ft T8 Fluorescent Tube. This gear tray comes complete with switch start choke, starter, capacitor, T8 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded chokes and are 100% tested before we send them out.

Pure Bronze PBO 400w C Wattage:250-500w Base cap:Cable Average life:600h Diameter:14.0mm Length:116.0mm

A 1000 Watt elliptical mercury or MBFU bulb with a GES fitting - emits a high level of neutral white light. MBFU lamps are frequently used in industrial applications, from outdoor lighting eg. residential areas and roads. They can also be used in car parks, garages and shops.

Venture MZ083K22245 Parmar Ballast is a 50hz ballast suitable for use with Mercury lamps.This ballast runs 1 x 80w lamp. This ballast has a metal base and enclosure, 2.5mm terminal block, microprocessor controlled, remotely operated up to 25m, accepts 0.75mm to 2.mm solid stranded cable.

T5 Modular Fitting 4 x 14W ideal for use in offices, reception areas, retail areas and other commercial premises. The rear is closed for maximum efficiency and there is a perforated steel sheet which sits between the louvres. (Dimensions: Length - 595mm. Width - 595mm. Depth - 61mm.) Does not come complete with lamps.

The HPI PLUS BU 250W/745 is a 250w quartz metal halide lamp with a coated finish. This lamp has a GES (E40) screw cap. This lamp should be used in a base-up burning position. HPI lamps emit a clear white colour and offer great colour stability. These lamps should be should be used in enclosed fittings and are often used for sports lighting, flood lighting and lighting large areas. These lamp can be run on HPI control gear as well as SON control gear. These lamps have an average life of 20,000 hours.