This is an addressable and dimmable high frequency ballast to run: 2 x 24 Watt long single turn compact fluorescent lamps

This is an addressable and dimmable high frequency ballast to run: 2 x 18 Watt long single turn compact fluorescent lamps

Venture Whitelux HIT 250/WLC/UVS/35K is a 250 watt Enclosed Rated Universal White-Lux Plus Tubular Metal Halide Venture.This lamp has an average life of 20,000 hours and are supplied with a clear finish. This lamp has a giant screw cap and the colour is 3500k. Venture part number is 63736

Venture HIT 250W/15K is a 250 watt Enclosed Rated Tubular Ceramic Metal Halide Venture lamp.The colour temperature is 15,000. This lamp is Tubular and has a giant edison screw cap and is for use in aquariums and for special purpose lamps.Venture part number is 00269.

Venture HIT 250W/20K is a 250 watt Enclosed Rated Tubular Ceramic Metal Halide Venture lamp.The colour temperature is 20,000. This lamp is Tubular and has a giant edison screw cap and is for use in aquariums and for special purpose lamps.Venture part number is 00270.

Venture HIT 400W/15K is a 400 watt Enclosed Rated Tubular Ceramic Metal Halide Venture lamp.The colour temperature is 15,000. This lamp is Tubular and has a giant edison screw cap and is for use in aquariums and for special purpose lamps.Venture part number is 00272.

The Osram QTi-T/E 1x18-57/220-240 DIM is a 1-10v intelligent dimmable ballast to run 1 x 18w, 26w, 32w, 42w or 57w triple turn compact fluorescent lamp. These ballasts have an average life of 100,000 hours, offer flicker free light, have an automatic safety shutdown at lamp failure, automatic restart after lamp replacement and are suitable for emergency lighting.

This is a 110v 2 x 18w T8 A Frame site light suitable for use in 110v site applications. This is supplied fully assembled, complete with a carry handle and is RoHS compliant. (This is not supplied with tubes) General Characteristics Voltage 110v, 50Hz Wattage 2x18w Control Gear Electronic Lamp Type T8 (Not Included) IP Rating IP 54 Sockets 2 x 16A, 110v, IP44 Plug 1 x 16A, 110v, IP44 Cable 3 Metre Height 900mm Width 700mm

The Philips HID-PV C 35 /l CDM electronic ballast comes complete with strain relief and runs 1x35w metal halide lamps.this ballast is available as independent (/I) for independent use on a (false) ceiling, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

This Philips HF-R 136 PL-L dimmable ballast runs 1 x 36w PL-L. This ballast's lamp power can be regulated from 1% to 100%, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up.

This Philips HF-R 140 PL-L dimmable ballast runs 1 x 40w PL-L. This ballast's lamp power can be regulated from 1% to 100%, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up.

This Philips HF-R 155 PL-L dimmable ballast runs 1 x 55w PL-L. This ballast's lamp power can be regulated from 1% to 100%, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up.

This is a Tridonic ZRM 20-ES/B standard ignitor to ignite 1000w sodium lamps and metal halide lamps between 1000w and 2000w. Tridonic article number - 20826280

This is a 20w ceramic metal halide PAR 20 reflector lamp with a 10 degree flood beam and ES edison screw cap. CDM-R lamps are high efficiency, discharge reflector lamps and have stable colour for the full duration of their life time and offer a crisp, sparkling warm white light - GE 26478

The Tridonic PCA 2/36 T8 ECO is a dimmable high frequency ballast to run: 2 x 36 Watt 4ft fluorescent tube

The Helvar EL SC 2x28HFC now a Helvar EL2x28sc is a dimmable high frequency ballast is to run 2 x 28w T5 fluoresent tube. They can be dimmed from 1-100%, extremeley low energy consumption, Flicerless light, Optimum cathode control and simultaneous lighting control by switch-control and analog control.

The Helvar EL SC 2x35HFC now a Helvar EL 2x35sc is a dimmable high frequency ballast is to run 2 x 35w T5 and 2 x 36w PL-L fluoresent tube. They can be dimmed from 1-100%, extremeley low energy consumption, Flicerless light, Optimum cathode control and simultaneous lighting control by switch-control and analog control.

The Helvar EL SC 2x39HFC now a Helvar EL 2x39sc is a dimmable high frequency ballast is to run 2 x 39w T5 and 2 x 39w PL-L fluoresent tube. They can be dimmed from 1-100%, extremeley low energy consumption, Flicerless light, Optimum cathode control and simultaneous lighting control by switch-control and analog control.

The Helvar EL SC 2x49HFC now a Helvar EL 2x49sc is a dimmable high frequency ballast is to run 2 x 49w T5 fluoresent tube. They can be dimmed from 1-100%, extremeley low energy consumption, Flicerless light, Optimum cathode control and simultaneous lighting control by switch-control and analog control.

An Osram Parathom Pro 8w LED PAR16 in warm white with a GU10 cap. This lamp has an average life of 25,000 hours.