This is a 28w 2D Circular Bulkhead - White Base - Prismatic Diffuser. It is a  Polycarbonate base and diffuser . Dia: 283 x H: 78mm . Lamp is not included needs a 28W, 2D 4 pin .

This is a 38w 2D Discus Bulkhead - Black Base - Prismatic Diffuser. It is a  Polycarbonate base and diffuser . Dia: 350 x H: 100mm . Lamp is not included needs a 38W, 2D 4 pin .

This is a 28w 2D Square Bulkhead - Black Base - Prismatic Diffuser. It is a  Polycarbonate base and diffuser . Dia w: 250 x h: 250 x d: 88mm . Lamp is not included needs a 28W, 2D 4 pin .

This is a 28w 2D Square Bulkhead - White Base - Opal Diffuser. It is a  Polycarbonate base and diffuser . Dia w: 250 x h: 250 x d: 88mm . Lamp is not included needs a 28W, 2D 4 pin .

This is a triple 30w switch start, complete gear tray to run 3 x 30w 3ft T8 Fluorescent Tube. This gear tray comes complete with switch start choke, starter, capacitor, T8 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded chokes and are 100% tested before we send them out.

This is a triple 36w switch start, complete gear tray to run 3 x 36w 4ft T8 Fluorescent Tube. This gear tray comes complete with switch start choke, starter, capacitor, T8 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded chokes and are 100% tested before we send them out.

This is an IP20 rated led round light kit, this kit has a satin chrome finish and emits a blue light. This light is made from Die cast aluminium and comes complete with 3 x 1.2w led lamps.

This is an 240v, 38w, 2D 3 Way Wilson Fitting White Base/Opal Diffuser. It is powder coated steel and also has a 3 hr emergency back-up available Electronic ballast. D ia: 435 x D: 110mm. The lamp is not included with this.

This is a fused, quad 14w high frequency, complete gear tray to run 4 x 14w HE T5 Fluorescent Tube. This gear tray comes complete with a branded high frequency ballast, T5 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded ballasts and are 100% tested before we send them out.

2 x 36w 4ft T8 IP65 Rated HF 240v Non-Corrosive Fitting. These IP rated fittings offer high ingress protection from moisture, dust, corrosion and vandalism. This high specification fitting also comes complete with a high frequency ballast and quick release gear tray. This unit does not included lamps.

2 x 36w 4ft T8 IP65 Rated HF 240v Led Ready. These IP rated fittings offer high ingress protection from moisture, dust, corrosion and vandalism.This unit does not included lamps.

8w Exit Box - Maintained - White. This 8w maintained exit box has a T5 8w fluorescent tube included, Nickel cadmium 2.4v, 4.5Ah battry, 3hr emergency duration, recharging time 24 hrs, IP20 rated, running person down included, left, right and down legends available. Body = Powder Coated Steel and legend = Polycarbonate.

8w - 3hr - 240V Maintained Fitting.This 8w maintained fitting comes complete with screw down diffuser, Polycarbonate body & diffuser, white base and prismatic diffuser, 6 x 20mm knockouts for additional functions, 8w T5 fluorescent lamp included, designed BE EN 60598 -2 -22, emergency lumens = 96 lumens and ballast lumen factor = 0.24.

8w Maintained Emergency Fitting - Fully Recessed. This 8w maintained fitting comes complete with a T5 8w fluorescent tube., Nickel cadmium 2.4v 4.5 ah, 3 hr emergency duration, 24hr recharging time, body = steel, diffuser = polycarbonate and is IP20 rated.

This is a fused, quad 36w high frequency, complete gear tray to run 4 x 36w 4ft T8 Fluorescent Tube. This gear tray comes complete with a branded high frequency ballast, T8 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded ballasts and are 100% tested before we send them out.

This is a fused, quad 58w high frequency, complete gear tray to run 4 x 58w 5ft T8 Fluorescent Tube. This gear tray comes complete with a branded high frequency ballast, T8 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded ballasts and are 100% tested before we send them out.

This is an 70W T8 Fluorescent Batten Fitting. This fitting is a steel construction with a powder coated finish. It comes complete with a high frequency ballast and flurescent tube starter. This fitting does not include the lamp. Length: 104mm , Width: 1791mm , Depth: 62mm

This is a fused, triple 70w high frequency, complete gear tray to run 3 x 70w 6ft T8 Fluorescent Tube. This gear tray comes complete with a branded high frequency ballast, T8 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded ballasts and are 100% tested before we send them out.

This is an twin 58W T8 Fluorescent Batten Fitting. This fitting is a steel construction with a powder coated finish. It comes complete with a high frequency and flurescent tube starter. This fitting does not include the lamp. Length: 104mm , Width: 1526mm , Depth: 87mm

This is a fused, twin 80w high frequency, complete gear tray to run 2 x 80w HO T5 Fluorescent Tube. This gear tray comes complete with a branded high frequency ballast, T5 mounting clips, lamp leads and lamp holders. All our gear trays are supplied using branded ballasts and are 100% tested before we send them out.