The Mackwell Advanze-1 ST680 is an emergency inverter for use with T5,High Output and Long single turn high efficiency 80w tubes. It has a 3 hour duration and should be used with a 6 cell battery pack. These inverters have several features including: Switch Mode Power Supply for thermal overload protection and Cathode heating ensures safe and reliable starting of T5 lamps in a variety of conditions and uses.

The Mackwell Advanze-2 ST681 is an emergency inverter for use with T5,High Output and Long single turn high efficiency 80w tubes. It has a 3 hour duration and should be used with a 6 cell battery pack. These inverters have several features including: Switch Mode Power Supply for thermal overload protection and Cathode heating ensures safe and reliable starting of T5 lamps in a variety of conditions and uses.

The Mackwell DT13 is a combined electronic ballast and emergency module to run 13 double turn compact fluorescent lamps.

The Mackwell DT18 is a combined electronic ballast and emergency module to run 18 double turn compact fluorescent lamps.

The Mackwell DT26 is a combined electronic ballast and emergency module to run 13 double turn compact fluorescent lamps.

The Mackwell DT32 is a combined electronic ballast and emergency module to run 26w and 32w triple turn compact fluorescent lamps.

The Mackwell AS2C/NM3 is an autotest non maintained emergency inverter for use with T5 lamps with wattages between 4w to 8w. It is fitted with a 5 pole relays to swich all four lamp connections from ballast to inverter and switch of the power to the ballast during emergency lighting testing. The modules can therefore be safely connected to a circuting with an electronic HF ballast and provide complete isolation to the control gear. This inverter should be used with a 2 cell battery pack.

The Mackwell AS3C/NM3 is a non maintained emergency inverter for use with T5 lamps with wattages between 18 and 36w. It is fitted with a 5 pole relays to swich all four lamp connections from ballast to inverter and switch of the power to the ballast during emergency lighting testing. The modules can therefore be safely connected to a circuting with an electronic HF ballast and provide complete isolation to the control gear. This inverter should be used with a 3 cell battery pack.

The Mackwell DS42 is an integrated module to run single 13w and 42w triple turn compact fluorescent lamps in both mains and emergency modes. This is a combined high frequency ballast and emergency lighting unit. These should be used with a 4 cell battery when used with 13w lamps and 6 cell batteries when using 42w lamps.

The Mackwell DS22C is an integrated module to run single 22w circular T5 fluorescent tubes in both mains and emergency modes. This is a combined high frequency ballast and emergency lighting unit. These should be used with a 4 cell battery.

The Mackwell DS40C is an integrated module to run single 40w circular T5 fluorescent tubes in both mains and emergency modes. This is a combined high frequency ballast and emergency lighting unit. These should be used with a 4 cell battery.

The Mackwell DS55C is an integrated module to run single 55w circular T5 fluorescent tubes in both mains and emergency modes. This is a combined high frequency ballast and emergency lighting unit. These should be used with a 4 cell battery.

The Mackwell AS2C is an autotest emergency inverter for use with T5 lamps with wattages between 4w to 8w. It is fitted with a 5 pole relays to swich all four lamp connections from ballast to inverter and switch of the power to the ballast during emergency lighting testing. The modules can therefore be safely connected to a circuting with an electronic HF ballast and provide complete isolation to the control gear. This inverter should be used with a 2 cell battery pack. These inverters are maintained with 5 pole isolating relays and SmartStart. Smart start provides improved starting from low power batteries, immediate lamp strike with cathode heating for 30 seconds and cooler module operation.

The Mackwell AS3C is an emergency inverter for use with T8 lamps with wattages between 18 and 36w. It is fitted with a 5 pole relays to swich all four lamp connections from ballast to inverter and switch of the power to the ballast during emergency lighting testing. The modules can therefore be safely connected to a circuting with an electronic HF ballast and provide complete isolation to the control gear. This inverter should be used with a 3 cell battery pack. The Primian-2 inverters are maintained with 5 pole isolating relays and SmartStart. Smart start provides improved starting from low power batteries, immediate lamp strike with cathode heating for 30 seconds and cooler module operation.

The Mackwell AS4C is an autotest emergency inverter for use with T8 lamps with wattages between 18 and 58w. It is fitted with a 5 pole relays to swich all four lamp connections from ballast to inverter and switch of the power to the ballast during emergency lighting testing. The modules can therefore be safely connected to a circuting with an electronic HF ballast and provide complete isolation to the control gear. This inverter should be used with a 4 cell battery pack. These inverters are maintained with 5 pole isolating relays and SmartStart. Smart start provides improved starting from low power batteries, immediate lamp strike with cathode heating for 30 seconds and cooler module operation.

The Mackwell AS5C is an autotest emergency inverter for use with T8 lamps with wattages between 18 and 70w. It is fitted with a 5 pole relays to swich all four lamp connections from ballast to inverter and switch of the power to the ballast during emergency lighting testing. The modules can therefore be safely connected to a circuting with an electronic HF ballast and provide complete isolation to the control gear. This inverter should be used with a 5 cell battery pack.

The Mackwell AD123+ is an autotest M1/M3 3 cell combination emergency module and ballast to run 28w 2D compact fluorescent lamps. This module is designed for single lamp operation and can be used for 1 or 3 hour emergency duration.

The Mackwell AD128+ is an autotest M1/M3 4 cell combination emergency module and ballast to run 1 x 28w 2D compact fluorescent lamps. This module is designed for single lamp operation and can be used for 1 or 3 hour emergency duration.

The Mackwell D128/80+ is an M1/M3 4 cell combination emergency module and ballast to run 1 x 28w 2D compact fluorescent lamps. This module is designed for single lamp operation and can be used for 1 or 3 hour emergency duration.

Mackwell ASR664 is an autotest emergency inverter for use with T8 lamps with wattages between 18 and 36w. It is fitted with a 5 pole relays to swich all four lamp connections from ballast to inverter and switch of the power to the ballast during emergency lighting testing. The modules can therefore be safely connected to a circuting with an electronic HF ballast and provide complete isolation to the control gear. This inverter should be used with a 3 cell battery pack.