This Philips HF-R TD 2 26-42 PL- T/C dimmable ballast runs between a 2 x 26w PL-C, 2 x 26w PL-T,2 x 32w PL-T or 2 x 42w PL-T. This ballast's lamp power can be regulated from 1% to 100%, digital control input according to the industry standard DALI (digital addressable lighting interface) combined with the touch and dim pushbutton protocol, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up

This Philips HF-R TD 218 PL- T/C dimmable ballast runs between a 2 x 18w PL-T or a 2 x 18w PL-C. This ballast's lamp power can be regulated from 1% to 100%, digital control input according to the industry standard DALI (digital addressable lighting interface) combined with the touch and dim pushbutton protocol, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up

The HPI PLUS BUS 400W/745 is a 400w quartz metal halide lamp with a coated finish. This lamp has a GES (E40) screw cap. This lamp should be used in a base-up burning position with internal starter. HPI lamps emit a clear white colour and offer great colour stability. These lamps should be should be used in enclosed fittings and are often used for sports lighting, flood lighting and lighting large areas. These lamp can be run on HPI control gear as well as SON control gear. These lamps have an average life of 20,000 hours.

The HPI PLUS BUS-P 400W/745 is a 400w quartz metal halide lamp with a coated finish. This lamp has a GES (E40) screw cap. This lamp should be used in a base-up burning position with internal starter and it is protected. HPI lamps emit a clear white colour and offer great colour stability. These lamps should be should be used in enclosed fittings and are often used for sports lighting, flood lighting and lighting large areas. These lamp can be run on HPI control gear as well as SON control gear. These lamps have an average life of 20,000 hours.

The Philips HID-PV C 70 /l CDM electronic ballast comes complete with strain relief and runs 1x70w metal halide lamps.this ballast is available as independent (/I) for independent use on a (false) ceiling, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

Philips Master LED LV AR111. This LED LV AR111 lamp has a 24 and 40 deg beam, it has an average lamp life of 45,000 hours and is colour 2700k and 3000k, this 10w lamp is equivalent to a 50w halogen lamp and has a patented intelligent driver also this lamp is not dimmable

This Philips HF-R TD 218 TL-D dimmable ballast runs 2 x 18w T8 fluorescent tubes. This ballast's lamp power can be regulated from 1% to 100%, digital control input according to the industry standard DALI (digital addressable lighting interface) combined with the touch and dim pushbutton protocol, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up.

This Philips HF-R 122 TL5 Circular dimmable ballast runs a 1 x 22w T5 fluorescent tube. This ballast's lamp power can be regulated from 1% to 100%, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up

This Philips HF-R 140 TL5 Circular dimmable ballast runs a 1 x 40w T5 fluorescent tube. This ballast's lamp power can be regulated from 1% to 100%, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up

Philips Master LED Spot PAR 38 Indoor. This LED PAR 38 Indoor lamp has an ES (E27) Cap and a 22 deg beam, it has an average lamp life of 45,000 hours and is colour 2700k, this 18w lamp is equivalent to a 100w halogen lamp.

The Philips HID-PV C 150 /l CDM electronic ballast comes complete with strain relief and runs 1x150w metal halide lamps.this ballast is available as independent (/I) for independent use on a (false) ceiling, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

The Philips HID-PV Cx 2x70 70 /l CDM electronic ballast comes complete with strain relief and runs 2x70w metal halide lamps.this ballast is available as independent (/I) for independent use on a (false) ceiling, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

The Philips HF-P 2 95-120 TL5 is a fixed output high frequenct ballast for use with 2 x 95w or 120w flourescent lamps. This ballast has a flicker free warm start, electrode heating cut off, Low energy consumption and automatic stop circuit (stop start). The Philips HF-P is often used in Department stores, Airports, Railway stations, Hotels and Hospitals. It is also suitable for emergency installations.

The Philips HF-P 1 95-120 TL5 is a fixed output high frequenct ballast for use with 1 x 95w or 120w flourescent lamps. This ballast has a flicker free warm start, electrode heating cut off, Low energy consumption and automatic stop circuit (stop start). The Philips HF-P is often used in Department stores, Airports, Railway stations, Hotels and Hospitals. It is also suitable for emergency installations.

This Philips HF-R TD 418 TL-D dimmable ballast runs 4 x 18w T8 fluorescent tubes. This ballast's lamp power can be regulated from 1% to 100%, digital control input according to the industry standard DALI (digital addressable lighting interface) combined with the touch and dim pushbutton protocol, automatic stop start, automatic restart after lamp replacement, up to 75% reduction in energy consumption and quick programme flicker free start.The Philips HD-f ballasts are commonly used in offices. These units are for use with installations with emergency back up.

Philips Master LED Spot PAR 38 Outdoor. This LED PAR 38 Outdoor lamp has an ES (E27) Cap and a 25 deg beam, it has an average lamp life of 20,000 hours and is colour 2700k, this 16w lamp is equivalent to a 80w halogen lamp.

The Philips HID-PV 50 /S SDW-TG (mini white SON) ballast runs 1x50w metal halide lamps.this ballast is for use in luminaire,minimal lamp power spread, Lamp end of life detection, independent use with strain relief, long lifetime of 40000 hours it is also RoHS compliant. This Philips HID-PV is usually used in shop lighting as it creates a cosy atmosphere it is ideal for goods displays it is suitable for indoor use. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

The Philips HID-PV 100 /S SDW-TG (mini white SON) ballast runs 1x100w metal halide lamps.this ballast is for use in luminaire,minimal lamp power spread, Lamp end of life detection, independent use with strain relief, long lifetime of 40000 hours it is also RoHS compliant. This Philips HID-PV is usually used in shop lighting as it creates a cosy atmosphere it is ideal for goods displays it is suitable for indoor use. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

The Philips HID-PV m 1x020/S High Power Factor minature ballast runs 1x20w metal halide lamps.this ballast is for use in luminaire,smallest gear available, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.

The Philips HID-PV m 1x035/S minature ballast runs 1x35w metal halide lamps.this ballast is for use in luminaire,smallest gear available, minimal lamp power spread, microprocessor controlled, lamp end of life detection, long lifetime of 40,000 hours, lamp life is increased by up to 30% for CDM lamps, silent operation without hum it is also RoHS compliant. This Philips HID-PV is usually used in accent and decorative lighting for shops and retail, public spaces, lobbies and offices. This unit is designed for optimum system performance with Philips MASTERcolour CDM lamps.