Oxford Darxide BMX PedalsWith Cr-mo axle and six colours to choose from these are the perfect entry level BMX pedals.

Oxford Darxide BMX PedalsWith Cr-mo axle and six colours to choose from these are the perfect entry level BMX pedals.

Oxford Darxide BMX PedalsWith Cr-mo axle and six colours to choose from these are the perfect entry level BMX pedals.

Look Keo 2 Max, Road Bicycle PedalsThe New Keo.The Keo is world renowned as the de facto standard in road bicycle pedals from the very people that invented the clipless system in the first place.The latest and most refined version of Look's most popular pedal is the Keo 2 Max, which is based on the original but with improvements that are significant enough to launch it as a new marque of Keo.Performance Enhancing Upgrades.Large, resistant cleat contact area. The Keo 2 Max uses a larger cleat contact area for increased efficiency and a more comfortable pedal stroke. It is also compatible with Keo Grip cleats for the ultimate solid coupling of cleat and pedal. The contact area has been made from stainless steel, moulded into the body of the pedal, giving a more durable finish for a longer lifespan as well as better power transfer efficiency.Light Weight. The refined shape of the new Keo also results in a weight saving of 10g compared to it's predecessor, bringing the overall weight down to 130g. Reliability.To retain it's status as an enduring classic the Keo 2 has been developed to be dependable, mile after mile.Composite models like this one use the same oversized cromo axle and bearing combination but with a composite body instead of a carbon one.As a result they are slightly heavier and slightly less rigid, although a low stack height keeps the negative effects to a minimum, so the biggest difference you'll really notice is the price!Performance and Power Transfer.The new line of Kéo 2 MAX pedals maintains a low cleat contact height despite the steel oversize axle. The pedal is built with two miniature ball bearings (12mm inner x 18mm outer diameters) and a needle roller bearing, keeping the stack height nice and low on the strong and stiff ovesized axle.Pro Tour Podium Placing.Look Keo 2 Max is already the pedal of choice for a host of professional teams, and was used by Alberto Contador during his 2009 Tour de France victory, as well as adorning the bikes of some of the worlds top teams, including Cofidis, Astana, Quick Step, Agritubel, Silence Lotto and Katiowa, to name a few.Basically, lots of people use Keo because they work so well. If you haven't used them before then the launch of the new Keo 2 Max means now is the perfect time.

Look Keo 2 Max, Road Bicycle PedalsThe New Keo.The Keo is world renowned as the de facto standard in road bicycle pedals from the very people that invented the clipless system in the first place.The latest and most refined version of Look's most popular pedal is the Keo 2 Max, which is based on the original but with improvements that are significant enough to launch it as a new marque of Keo.Performance Enhancing Upgrades.Large, resistant cleat contact area. The Keo 2 Max uses a larger cleat contact area for increased efficiency and a more comfortable pedal stroke. It is also compatible with Keo Grip cleats for the ultimate solid coupling of cleat and pedal. The contact area has been made from stainless steel, moulded into the body of the pedal, giving a more durable finish for a longer lifespan as well as better power transfer efficiency.Light Weight. The refined shape of the new Keo also results in a weight saving of 10g compared to it's predecessor, bringing the overall weight down to 130g. Reliability.To retain it's status as an enduring classic the Keo 2 has been developed to be dependable, mile after mile.Composite models like this one use the same oversized cromo axle and bearing combination but with a composite body instead of a carbon one.As a result they are slightly heavier and slightly less rigid, although a low stack height keeps the negative effects to a minimum, so the biggest difference you'll really notice is the price!Performance and Power Transfer.The new line of Kéo 2 MAX pedals maintains a low cleat contact height despite the steel oversize axle. The pedal is built with two miniature ball bearings (12mm inner x 18mm outer diameters) and a needle roller bearing, keeping the stack height nice and low on the strong and stiff ovesized axle.Pro Tour Podium Placing.Look Keo 2 Max is already the pedal of choice for a host of professional teams, and was used by Alberto Contador during his 2009 Tour de France victory, as well as adorning the bikes of some of the worlds top teams, including Cofidis, Astana, Quick Step, Agritubel, Silence Lotto and Katiowa, to name a few.Basically, lots of people use Keo because they work so well. If you haven't used them before then the launch of the new Keo 2 Max means now is the perfect time.

RIDE AT YOUR BESTTHE NEW KEO 2 MAX IS THE PRODUCT THAT WILL GIVE YOU THE CONFIDENCE YOU NEED TO GO BEYOND YOUR PERSONAL LIMITS.The LOOK design team has completely remodelled the shape of the KEO 2 MAX, giving it a new, slimmed down line yet a wider contact surface, increasing its style and efficiency.TECHNOLOGIESOPTIMIZED CONTACT SURFACEThe pedal’s surface area has substantial symbolic importance. It is part of the brand’s identity and acts as an indelible signature on the product.The contact surface of the new KEO 2 MAX preserves the strong lines on which its history was built. Its width has been increased to 60 mm to provide a larger platform and improved foot stability during pedalling. This creates a feeling of unrivalled comfort not found in any other pedal.We also sought to optimize power transfer thanks to its new 500 mm² of usable surface (+25% increase). The shape of the stainless-steel plate has been revised to match that of the cleat and to keep, regardless of the position of your foot (depending upon the angular float you use), the same amount of contact for consistent performance.Increasing the pedal’s usable contact surface, without any additional weight gain, improves the Power to Weight ratio, making the product even better and allowing you to perform at your best.IMPROVED SPINDLE PROFILEThe spindle profile of the new KEO 2 MAX has also been optimized. Built around an oversized «Chromoly Plus» steel axle, it is composed of an axle with an inner ball bearing and a needle roller bearing, located under the contact surface, to handle the load and distribute it optimally.A new component has been added between these two bearings. A serrated washer, previously used to hold the needle roller bearing in place, has been replaced with a conical spacer. This technical solution reduces friction, increases fluidity, and by consequence, decreases the geometrical tolerances of the pedal body and play.The sole purpose of the sum of these improvements has been to guarantee you irreproachable reliability.SPECIFICATIONSUSAGE: Recreational to CompetitionBODY: CarbonAXLE: Chromoly +PEDAL STACK HEIGHT + CLEATS: 17,3 mmCONTACT SURFACE AREA: 500 mm²FLOAT: 8 or 12 adjustable springCLEATS: Kéo Grip CleatsPEDAL WEIGHT: 125 gr (312 gr per pair with cleats and screws)COLOURS: BlackACCESSORIES: A pair of Grey Kéo Grip cleats + screwsGUARANTY: 2 years

LOOK KEO 2 MAX BLADE CROMO AXLE W/ KEO CLEAT WHITE 118G (8NM SPRING)

ONE-OF-A-KIND EXPERIENCE, BLADE TECHNOLOGYThe Blade body and blade are built from composite material. This substance makes the production of a range of less rigid blades possible – 08 to 12 -, for a cleat engagement and release feel that falls between a metal spring and a carbon blade pedal.The Blade brings together all the benefits of a blade pedal: crisper in and out clipping, better foot support for more security, aerodynamic shape and low weight (compared to a conventional spring system). The platform contact area has been enlarged, providing excellent pedalling stability.TECHNOLOGIESBLADE TECHNOLOGYBlade technology uses a blade instead of a conventional metal spring, which has many advantages for the user:• Safe cleat entry/ release: the blade flexes, providing a firm hold once clipped-in, and when clipping-out, releases the foot faster at the end of the process in a quick and secure movement.• An aerodynamic shape: thanks to the integration of the blade inside the body, pedals equipped with BLADE technology have the best aerodynamic shape ever created.• Low weight: the design of the pedal around a blade system allows a significant reduction in weight and better load distribution.SPINDLE: MORE STABILITY AND BETTER LOAD DISTRIBUTIONThe Blade Carbon pedal spindle was designed to obtain a very low stack height: only 13mm. It uses a needle bearing cartridge installed in a central position for better stress resistance while pedalling and two spaced out ball bearings which distribute the load, providing increased rigidity between the body and the length of the spindle guaranteeing excellent rotational speed.Axle play (related to internal bearing movement and part wear) is eliminated by a wave spring that constantly applies a pre-load that does not deteriorate over time. When pushing hard on the pedals, this system can completely eliminate the annoyances caused by any play (noise and sensation of friction).LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the centre of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.CONTACT SURFACE AREA: MAXIMUM POWER TRANSFERTo answer the desires of some of the most demanding cyclists, notably competitors, the pedal and cleat system must allow efficient power transfer through a broad and rigid contact surface.Because of this, the Blade Carbon platform surface is covered with a 64mm wide, stainless steel plate that has been moulded into the body and optimizes, regardless of pedalling style, the over 400 mm² cleat/pedal contact area.SPECIFICATIONSUSAGE: Regular rider to CompetitiveBODY: CompositeAXLE: Chromoly steel +THREADING: 9/16 X 20 mmBEARINGS: 2 ball bearings, 1 needle bearing cartridgePEDAL STACK HEIGHT: 14 mmDISTANCE PEDAL SPINDLE / CRANK ARM: 53 mmCONTACT SURFACE AREA: 400 mm²FLOAT: 2 types of composite blades: 8 and 12CLEATS: Kéo Grip Cleats GreyANGULAR MOVEMENT: 0 °, 4.5 ° or 9 ° according to the cleat colour (Black, Grey, Red)PEDAL WEIGHT: 120 gr (308 gr per pair with cleats and screws)COLOURS: Black or WhiteACCESSORIES: A pair of Grey Kéo Grip cleats + screwsGUARANTY: 2 years

ONE-OF-A-KIND EXPERIENCE, BLADE TECHNOLOGYThe Blade body and blade are built from composite material. This substance makes the production of a range of less rigid blades possible – 08 to 12 -, for a cleat engagement and release feel that falls between a metal spring and a carbon blade pedal.The Blade brings together all the benefits of a blade pedal: crisper in and out clipping, better foot support for more security, aerodynamic shape and low weight (compared to a conventional spring system). The platform contact area has been enlarged, providing excellent pedalling stability.TECHNOLOGIESBLADE TECHNOLOGYBlade technology uses a blade instead of a conventional metal spring, which has many advantages for the user:• Safe cleat entry/ release: the blade flexes, providing a firm hold once clipped-in, and when clipping-out, releases the foot faster at the end of the process in a quick and secure movement.• An aerodynamic shape: thanks to the integration of the blade inside the body, pedals equipped with BLADE technology have the best aerodynamic shape ever created.• Low weight: the design of the pedal around a blade system allows a significant reduction in weight and better load distribution.SPINDLE: MORE STABILITY AND BETTER LOAD DISTRIBUTIONThe Blade Carbon pedal spindle was designed to obtain a very low stack height: only 13mm. It uses a needle bearing cartridge installed in a central position for better stress resistance while pedalling and two spaced out ball bearings which distribute the load, providing increased rigidity between the body and the length of the spindle guaranteeing excellent rotational speed.Axle play (related to internal bearing movement and part wear) is eliminated by a wave spring that constantly applies a pre-load that does not deteriorate over time. When pushing hard on the pedals, this system can completely eliminate the annoyances caused by any play (noise and sensation of friction).LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the centre of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.CONTACT SURFACE AREA: MAXIMUM POWER TRANSFERTo answer the desires of some of the most demanding cyclists, notably competitors, the pedal and cleat system must allow efficient power transfer through a broad and rigid contact surface.Because of this, the Blade Carbon platform surface is covered with a 64mm wide, stainless steel plate that has been moulded into the body and optimizes, regardless of pedalling style, the over 400 mm² cleat/pedal contact area.SPECIFICATIONSUSAGE: Regular rider to CompetitiveBODY: CompositeAXLE: Chromoly steel +THREADING: 9/16 X 20 mmBEARINGS: 2 ball bearings, 1 needle bearing cartridgePEDAL STACK HEIGHT: 14 mmDISTANCE PEDAL SPINDLE / CRANK ARM: 53 mmCONTACT SURFACE AREA: 400 mm²FLOAT: 2 types of composite blades: 8 and 12CLEATS: Kéo Grip Cleats GreyANGULAR MOVEMENT: 0 °, 4.5 ° or 9 ° according to the cleat colour (Black, Grey, Red)PEDAL WEIGHT: 120 gr (308 gr per pair with cleats and screws)COLOURS: Black or WhiteACCESSORIES: A pair of Grey Kéo Grip cleats + screwsGUARANTY: 2 years

POWER TRANSFER AND AERODYNAMICSDesigned to win, the new KEO BLADE CARBON improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to daily input from the greatest of champions.Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours. It is for these reasons that KEO BLADE CARBON is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements.The KEO BLADE CARBON has the best weight / power ratio in its class.Its new design completely integrates the blade for unrivalled aerodynamics. Equipped with a carbon body and blade, the Blade Carbon is available in a Ti version (titanium spindle) that weighs a mere 95g per pedal, or in a CrMo version (chromoly spindle) for a weight of 110g per pedal. It is available in three tension release levels: 12,16 and 20.OPTIMIZED SPINDLE: MORE POWER TRANSFER AND RELIABILITYThe spindle of the new CARBON BLADE has been completely redesigned. It is built around an oversized axle and spindle that pass through internal roller and needle bearings located directly under the pedal platform. This new construction allows a gain of approximately 2 to watts at 100 rpm.The distance between the roller and needle bearings has been increased by 25%. This provides more rigidity along the entire length of the spindle, and as a consequence, improved power transmission.Special attention has also been given to ensure that it is water resistant. Weather resistance has been improved by 120% for even more reliability and longevity. To accomplish this, the new spindle received an updated end plug with an O-ring washer and has also been equipped with an internal, double-lipped seal.LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the centre of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.ULTRA-POWERFUL PLATFORMTo meet the demands of the most demanding cyclists, especially competitors, the pedal-cleat system must allow efficient power transfer thanks to a broad and rigid platform.The platform of the CARBON BLADE is fitted with a 67mm-wide stainless-steel plate, optimizing the cleat/pedal contact areas, regardless of pedalling angle.With 700 mm² of surface area, the CARBON BLADE offers an optimized contact platform for an efficiency and power transfer that is unmatched on today’s market.Its weight / power ratio positions it well above the competitionBODY AND BLADE CARBON TECHNOLOGYUsing a carbon body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer.BLADE technology is a major technical innovation in the history of the automatic pedal because of its many benefits: LIGHTWEIGHT, AERODYNAMIC, ULTRA-SECURE WHEN CLIPPING IN AND OUTSPECIFICATIONSUSE: RaceBODY: CarbonSPINDLE: Chromoly Steel +THREADING: 9/16 X 20 mmBEARINGS: 1 roller bearing, 1 needle bearingSTACK HEIGHT: 14.8 mmDISTANCE PEDAL SPINDLE / CRANKARM: 53 mmPLATFORM WIDTH: 67 mmPLATFORM SURFACE AREA: 700 mm²TENSION: Pedals come installed with “12” carbon blades + additional “16” carbon blades(“20” carbon blades sold separately)CLEATS: Kéo Cleats-GreyFLOAT: 0 °, 4.5 ° or 9 ° according to the cleat colour (Black, Grey, Red)PEDAL WEIGHT: 110 gr (288 gr per pair with cleats and screws)COLOURS: BlackACCESSORIES: 2 sets of blades +1 pair of Kéo Cleats-Grey + screwsWARRANTY: 2 years

EXTREMELY LIGHTWEIGHTDesigned to win, the new KEO BLADE CARBON improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to daily input from the greatest of champions.Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours. It is for these reasons that KEO BLADE CARBON is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements.The KEO BLADE CARBON has the best weight / power ratio in its class.Its new design completely integrates the blade for unrivalled aerodynamics. Equipped with a carbon body and blade, the Blade Carbon is available in a Ti version (titanium spindle) that weighs a mere 95g per pedal, or in a CrMo version (chromoly spindle) for a weight of 110g per pedal. It is available in three tension release levels: 12,16 and 20.OPTIMIZED SPINDLE: MORE POWER TRANSFER AND RELIABILITYThe spindle of the new CARBON BLADE has been completely redesigned. It is built around an oversized axle and spindle that pass through internal roller and needle bearings located directly under the pedal platform. This new construction allows a gain of approximately 2 to watts at 100 rpm.The distance between the roller and needle bearings has been increased by 25%. This provides more rigidity along the entire length of the spindle, and as a consequence, improved power transmission.Special attention has also been given to ensure that it is water resistant. Weather resistance has been improved by 120% for even more reliability and longevity. To accomplish this, the new spindle received an updated end plug with an O-ring washer and has also been equipped with an internal, double-lipped seal.LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the centre of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.ULTRA-POWERFUL PLATFORMTo meet the demands of the most demanding cyclists, especially competitors, the pedal-cleat system must allow efficient power transfer thanks to a broad and rigid platform.The platform of the CARBON BLADE is fitted with a 67mm-wide stainless-steel plate, optimizing the cleat/pedal contact areas, regardless of pedalling angle.With 700 mm² of surface area, the CARBON BLADE offers an optimized contact platform for an efficiency and power transfer that is unmatched on today’s market.Its weight / power ratio positions it well above the competitionBODY AND BLADE CARBON TECHNOLOGYUsing a carbon body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer.BLADE technology is a major technical innovation in the history of the automatic pedal because of its many benefits: LIGHTWEIGHT, AERODYNAMIC, ULTRA-SECURE WHEN CLIPPING IN AND OUTSPECIFICATIONSUSE: Race segmentBODY: CarbonSPINDLE: TitaniumTHREADING: 9/16 X 20 mmBEARINGS: 1 roller bearing, 1 needle bearingSTACK HEIGHT: 14.8 mmDISTANCE PEDAL SPINDLE / CRANKARM: 53 mmPLATFORM WIDTH: 67 mmPLATFORM SURFACE AREA: 700 mm²TENSION: Pedals come installed with “16” carbon blades + additional “12” carbon blades (“20” carbon blades sold separately)CLEATS: Kéo Cleats-GreyFLOAT: 0 °, 4.5 ° or 9 ° according to the cleat colour (Black, Grey, Red)PEDAL WEIGHT: 95g (248g per pair with cleats and screws)COLOURS: BlackACCESSORIES: 2 sets of blades +1 pair of Kéo Cleats-Grey + screwsWARRANTY: 2 years 

Keo Blade Carbon Cr 16Nm Greipel Signature Pedal Ibd Only Black

Look: Discover The Fun And The Benefits Of Riding With The Kéo Classic 3 Clipless Pedal.Simple To Use, It Is Possible To Adjustment The Cleat Entry/release Tension Too Low For An Easy Clip Out. Its Large And Wide Contact Surface Provides Excellent Pedalling Stability.Chromoly Spindle For More ReliabilityThe Kéo Classic 3 Spindle Is Made Up Of An Oversized Steel Axle With Miniature Ball Bearings (12 Mm Inside X 18 Mm Outside) And A Needle Bearing Cartridge For Improved Wear Resistance. A Spacer Is Used To Hold The Needle Bearing Cartridge In Place.Look Spindles Are Only Approved After A Rotational Test Of 2 Million Cycles At 100Tr/min With A Load Of 90Kg On The Centre Of The Pedal And An Eccentric Rotation (Creating A Shock On Each Rotation). This Test Is Far More Gruelling To The Current Industry Standard, The En14781.The New Classic Two Has 400 Mm² Surface Area Which Is Almost 40% More Than The Competition. The Significance Of This Is The Load Is Spread Around The Cleat Rather Than Having A Small Concentrated Area, Which Improves Comfort And Reduced Foot Discomfort.

Look: Discover The Fun And The Benefits Of Riding With The Kéo Classic 3 Clipless Pedal.Simple To Use, It Is Possible To Adjustment The Cleat Entry/release Tension Too Low For An Easy Clip Out. Its Large And Wide Contact Surface Provides Excellent Pedalling Stability.Chromoly Spindle For More ReliabilityThe Kéo Classic 3 Spindle Is Made Up Of An Oversized Steel Axle With Miniature Ball Bearings (12 Mm Inside X 18 Mm Outside) And A Needle Bearing Cartridge For Improved Wear Resistance. A Spacer Is Used To Hold The Needle Bearing Cartridge In Place.Look Spindles Are Only Approved After A Rotational Test Of 2 Million Cycles At 100Tr/min With A Load Of 90Kg On The Centre Of The Pedal And An Eccentric Rotation (Creating A Shock On Each Rotation). This Test Is Far More Gruelling To The Current Industry Standard, The En14781.The New Classic Two Has 400 Mm² Surface Area Which Is Almost 40% More Than The Competition. The Significance Of This Is The Load Is Spread Around The Cleat Rather Than Having A Small Concentrated Area, Which Improves Comfort And Reduced Foot Discomfort.

Keo Sprint Pedals Cromo Axle W-Keo Cleat Black

Look: Look Axle Assembly Keo Blade Carbon Ti R/h

Look: Look Axle Assembly Keo Blade Carbon Ti L/h

Spare-Axle Assembly Keo Blade Carbon Ti D12 V3 (2013) R-H

Spare-Axle Assembly Keo Blade Carbon Ti D12 V3 (2013) L-H

Look: Look Axle Cap & Bolt Kit For Keo Blade 2 Ti (Inc. L/h & R/h)