The Pitlock Saddle Lanyard is a stainless steel cable which provides extra security for the saddle when used in conjunction with the Seat Post lock. Aprox. Diameter of the lanyard eyelet is 11mm.

PITLOCK LEVEL WASHERS FOR SOLID AXLES (2 PACK)

The Pitlock M10 single set secures the rear wheel axle of a Rohloff solid axle on either the left or right side.

PITLOCK DOUBLE M10 CLOSURES FOR ROHLOFF AXLES

Give your Pitlock the perfect finish with these push fit end caps to fit M5 Pitlock closures.

Give your Pitlock the perfect finish with these push fit end caps to fit M5 Pitlock closures.

PITLOCK PRESSURE WASHERS FOR WHEEL SKEWERS

PITLOCK PRESSURE WASHERS FOR SEAT POST

PITLOCK SEATPOST CLAMP

PITLOCK SEATPOST CLAMP

PITLOCK SEATPOST CLAMP

PITLOCK SEATPOST CLAMP

PITLOCK SEATPOST CLAMP

Pitlock saddle clamps are available in 28.6mm (for seat tubes with a diameter of 27.0 – 28.6mm); 31.8mm (for seat tubes with a diameter of 30.2 – 31.8mm) and 34.9 (for seat tubes with a diameter of 33.3mm - 34.9mm). The above sizes refer to the internal diameter of the saddle clamp.Use a Pitlock Saddle Clamp to replace saddle clamps which will not accept the Pitlock Seat Post Bolt.PISC2866              28.6mm SilverPISC286B             28.6mm BlackPISC3186              31.8mm SilverPISC318B             31.8mm BlackPISC3496              34.9mm SilverPISC349B             34.9mm Black

PITLOCK SEATPOST CLAMP

Secures:Front wheel (installation width - 119 mm standard)Seat post (installation width - 33 mm standard)1 Pit with code matching Ensure the outer contact surfaces of the seat post bol are flat and parallel to the saddle clamp. If this is not the case you can order a Pitlock saddle clamp to ensure the correct fit. 

 Contents:Front wheel skewerM6 headset nut and aluminium capSeat post bolt1 PIT key1 code card

 Contents:Front wheel skewerM6 headset nut and aluminium capSeat post bolt1 PIT key1 code card

The Pitlock 3 Piece Skewer Set is a coded high security protection device that is a direct replacement for the quick release skewers on front/rear wheels and seat posts.  •You will need a 14mm spanner to fit them •You must carry the key and spanner with you whilst cycling to allow wheel removal for punctures etc. •Can only be used on bikes with QR skewers and will not work with solid, nutted axles •Set features front / rear wheel & seat post skewers, 1 Pits and 1 Security Code ID •Duplicate keys can only be ordered using the security code supplied •Parts made of quality rustproof high-grade steel •Easy to install & use

 The Pitlock 4 Piece Skewer Set is a coded high security protection device that is a direct replacement for the quick release skewers on front/rear wheels and seat posts and head set.  •You will need a 14mm spanner to fit them •You must carry the key and spanner with you whilst cycling to allow wheel removal for punctures etc. •Can only be used on bikes with QR skewers and will not work with solid, nutted axles •Set features front / rear wheel & seat post skewers, 1 Pits and 1 Security Code ID •Duplicate keys can only be ordered using the security code supplied •Parts made of quality rustproof high-grade steel •Easy to install & use  Will only work with modern 1 1/8” Ahead stems and not with 1” ahead or quill stems. •Comes with individually coded screw/pit/security code ID•Duplicate keys can only be ordered using the security code supplied •Parts made of quality rustproof high-grade steel •Easy to install & use