The ND8 Filter for Phantom 3 Professional / Advanced from DJI reduces light reaching the camera's sensor by the equivalent of 3 stops. This enables slower shutter speeds for more realistic motion blur in video and helps avoid overexposure in bright conditions in photo and video.

Specifically made for the DJI Phantom 4, this ND8 filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera's aperture, exposure time and sensor sensitivity settings.Put more simply, the ND8 filter helps avoid overexposed photos.The ND8 filter allows 1/8 of incoming light through, equal to a 3-stop filter.

DJI Care Refresh is a service plan that provides you with peace of mind, covering damage to your DJI product. DJI Care Refresh is valid for 12 months and offers up to two full replacements at additional charge if accidental damage occurs to your product during normal use. Each time you request a replacement from DJI, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. DJI Care Refresh can be purchased for any camera that has not been activated or has been activated for less than 48 hours.Comprehensive protectionFor a small additional charge DJI Care Refresh offers up to two replacement units. The replacements will be in new or as-new condition in terms of performance and reliability.Water damage coverageIt can be replaced if your aircraft is damaged by water during normal use.Rapid supportGet prioritized replacement units, greatly reducing the time it takes for you to get back in the air.Free shippingIf you are in the region where you purchased your DJI Care Refresh, all shipping costs will be covered by DJI.VIP phone serviceVIP support provided by DJI product experts is just a phone call away.

Phantom 4 Pro vs Phantom 4 Pro Plus, what’s the difference? The only difference between these two options is that the Phantom 4 Pro Plus drone comes with a remote controller with a built-in 5.5-inch 1080p screen. The remote controller options removes the need for drone pilots to use their smartphones and offers 5 hours of battery life.Compact and powerful, the Phantom 4 Pro is one of the most advanced consumer drone options in the DJI lineup. With a max video transmission range of 4.3miles (7km), flight time of 30 minutes, top speed of 45mph, six vision sensors, intelligent flight modes, 4K-video recording and a stabilised 20-megapixel sensor, this drone is suitable for producing professional aerial photos and videos.Carrying a 1-inch 20-megapixel CMOS sensor, the camera of the Phantom 4 Pro is larger in physical size and resolution than the sensor featured in the Mavic Pro Platinum and four times the size of the 1/2.3-inch sensor in the Phantom 4. Constructed with a rigid titanium alloy and magnesium alloy frame this drone manages to come in at a similar weight to its predecessor (1388g), despite offering a host of technological improvements.Not only does the Phantom 4 Pro’s main camera sensor have larger pixels, it also has a maximum ISO sensitivity of ISO 12800, a combination that delivers greater dynamic range and lower signal-to-noise ratio. This makes it better at producing attractive images and video challenging lighting situations.The enhanced video processing system of the Phantom 4 Pro can capture DCI 4K/60 (4096x2160/60fps) video at a bitrate of 100Mbps, ideal for ultra-high definition slow motion video sequences. Additionally, creators have the option of recording 4K/30 in the H.265 codec and D-log for capturing the maximum amount of image data for colour grading in post. Capture sharp photos and crisp videos with the Phantom 4 Pro’s high-resolution 24mm f/2.8 wide-angle lens. Featuring eight elements, including low dispersion and low distortion elements, images captured by this drone will be faithful in colour and suffer less from chromatic aberrations. Consumer aerial cameras typically struggle to keep up with fast-moving action because they tend to have electronic shutters, however, the Phantom 4 Pro also has a mechanical shutter with a maximum shutter speed of 1/2000sec. This eliminates the problem of rolling shutter, also known as the jello effect. The electronic shutter of the Phantom 4 Pro has a maximum shutter speed of 1/8000sec and can capture 20-megapixel stills at up to 14fps in burst mode. The 3-axis gimbal of the Phantom 4 Pro helps to keep footage smooth and images sharp, even in wind and when the drone is in motion. The Phantom 4 Pro is a drone that enthusiast and experienced drone pilots can use with confidence as it features intelligent obstacle and collision detection sensors, which can bring the drone to a safe hovering stop up to at a user-defined distance (up to 30m) away from potential hazards. U

The Remote Controller Strap provides an ergonomic way wear your DJI Inspire 1's radio controller (transmitter), especially with the added weight of a tablet. Optimized for the weightier Inspire 1 transmitter, it works with the Phantom controllers, and many Futaba transmitters as well.

Hold a Ronin-M or Ronin-MX more easily and lean it against vertical surfaces when not in use. Also useful for different carrying styles and passing the Ronin between camera operators. Expansion screws available for personal optimization.

The Mavic Battery Charging Hub is designed for use with the Mavic Intelligent Flight Battery. When used with the Mavic Battery Charger, it can charge up to four Intelligent Flight Batteries. The Intelligent Flight Batteries will be charged in sequence according to their power levels, from high to low.

Use this Type-C connector to connect the remote controller to a mobile device via the USB Type-C port.

Patented rotor lock mechanism ensures reliable locking and tool-free mounting and release at the same time.Fool-proof design for CW and CCW blades.Can be used for Phantom 4.

The Car Charger for Phantom 3 is used to charge the Intelligent Flight Battery or remote controller (Pro/Adv/4K) through a car's cigarette lighter port. It comes with low-voltage protection and overheating protection which automatically cut off charging if your starting battery voltage is too low or cigarette lighter port exceeds a certain temperature.Specifications: Input voltage: Compact car : 12.3-16 V; Full-size car: 25-30 V DC output: 17.4 V; 5.17 A; 90 W Charging time: Intelligent Flight Battery: about 1 h; Remote controller (Pro/Adv/4K): about 3h 20min Charging times were tested under an experimental environment (25℃), and are for reference only.

DJI Care Refresh is a service plan that provides you with peace of mind, covering damage to your DJI product. DJI Care Refresh is valid for 12 months and offers up to two full replacements at additional charge if accidental damage occurs to your product during normal use. Each time you request a replacement from DJI, you’ll receive a replacement unit that is new or equivalent to new in performance and reliability. DJI Care Refresh can be purchased for any camera that has not been activated or has been activated for less than 48 hours.Comprehensive protectionFor a small additional charge DJI Care Refresh offers up to two replacement units. The replacements will be in new or as-new condition in terms of performance and reliability.Water damage coverageIt can be replaced if your aircraft is damaged by water during normal use.Rapid supportGet prioritized replacement units, greatly reducing the time it takes for you to get back in the air.Free shippingIf you are in the region where you purchased your DJI Care Refresh, all shipping costs will be covered by DJI.VIP phone serviceVIP support provided by DJI product experts is just a phone call away.

Specifically made for the DJI Phantom 4, this ND4 filter reduces the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing more control of the camera's aperture, exposure time and sensor sensitivity settings. Put more simply, the ND4 filter helps avoid overexposed photos.The ND4 filter allows 1/4 of incoming light through, equal to a 2-stop filter.

This hood shields your smartphone from direct sunlight to give you a perfectly clear view of your display. Made from high-quality synthetic leather, the hood can hold a phone of 165mm x 87mm x 85mm in size.The hood can be installed on the remote controllers for Inspire 1 Series, Phantom 3 Professional/Advanced/4K and Phantom 4.Compatible with iPhone 6 Plus and many other smartphonesLightweight, foldable, easy to carrySmartphone can be easily installed or removedVelcro design, easy to install and disassemble

The Remote Controller Monitor Hood for Phantom 3 / Inspire 1 from DJI is designed to shield your mobile device's screen from the bright rays of the sun. Sized to fit small tablets such as the iPad mini, it connects to the Mobile Device Holder for the Inspire 1, Phantom 3 Professional, and Phantom 3 Advanced quadcopters. The shade collapses to conserve space when not in use.

Use this Reverse Micro USB connector to connect the remote controller to a mobile device via the Micro USB port.

You can carry the Mavic and its accessories by using this Bag.

The HDMI Output Module for Phantom 3 Professional / Advanced from DJI upgrades the Phantom 3's controller by adding a mini-HDMI output. This means you can connect a monitor or FPV goggles and view a live, HD image from the Phantom 3 Camera. In addition, the module provides a USB Type-A port so that you can connect a mobile device, just as you would with the stock controller.

The DJI Quick Release Propellers for Phantom 4 is a two-pack that features one clockwise (CW) and one counterclockwise (CCW) prop. Featuring quick-release attachment, the props can be snapped on or off as needed without being unscrewed.Each propeller weights 11g, diameter and screw pitch is 24p×12.7cm.

this DJI Gimbal Cover protects gimbal and camera from collision, dust and water during transportation and in flight.

Protect your propellers from damage during collisions. Tough and highly reliable, this set includes four pieces of Phantom 4 Propeller Guards. Fully compatible with the Phantom 4.