A set of plastic coated steel frames which tread into the ground like a fork. Eight letter set for a 20 metre x 40 metre arena (A, B, C, E, F, H, K and M). Dimensions 69cm high, 23cm wide.

A set of dressage markers to fix against an arena wall or fence. Eight letter set for a 20M x 40M arena. Letters A, B, C, E, F, H, K and M.Dimensions 24cm x 24cm

A pair of plastic coated, steel jump cups complete with pins. For posts up to 67mm wide.

A set of plastic coated metal numbers to give your jumping course that professional look. They’re easy to secure by treading into any soft surface and are quick to remove by the handle at the top.Height 40cm.

These metal, plastic coated markers will add a finishing touch to your jumping course. They are easy to tread into any soft surface and are quick to remove by the top handle.

Make your own jump planks with this plastic coated metal fitting. Fits timber 38mm thick. Fixed with two screws or two small bolts (not included). One pair.

Provides a simple access point to your field, paddock or stable. The third bracket allows the rail to be slid into it when not in use and then pulled back across the entrance when required, rather than dropping the entire rail on the floor.Three bracket setProvides simple access to your field, paddock or stableFor rails up to 125mm x 75mmComplete with securing pin

Instantly removable from the plastic coated sockets, they can also be interchanged with straight bar door grilles and mesh grids as requirements dictate.Small - 61x91cm. Large - 76x105cm

Simple drop in section of zinc plated steel constuction. For use with anti weaver grill, 42109.

Strongly constructed, heavy duty zinc plated grille designed to adapt to the most popular stable sizes, or to provide limited openings between stables.Intended to fit on top of wooden or masonry walls.22mm diameter tubular bars set at 54mm gaps. 75mm wide steel top and bottom,Small 76cm tall x 122cm longLarge 76cm tall x 183cm long

Heavy duty zinc plated steel grille with close fitting rails for extra safety.

Beneficial for containment in narrow passages and for younger or aggressive horses. Zinc plated rods and flat steel, powder coated sockets.Small = 61cm tall x 89cm wideLarge = 76cm tall x 104cm wideBar spacings 8.5cm

A wall fixing tie ring with four screw holes. Plate 5cm square

A tie ring which screws into any wall, complete with washer and nut. Zinc plated.

For use with flat back buckets. Useful both inside and outside the stable. The opening side should face downwards for improved safety.

A spring loaded bolt for use on gates and doors.Length 20cm

A plastic coated holder that contains a stud card which has space to insert horse's name and details. The area inside the frame is protected by a plastic wallet, so you could insert a name card instead if you wished! 15cm x 10cm.

A very useful and simple way of keeping your buckets off the floor and preventing them from being knocked over. Simply place your bucket over the hook and the metal ring will prevent your horse from knocking it off or injuring itself on the protruding hook.

A zinc plated cabin hook on a plate, for restraining doors and gates. Length 15cm

A pair of cranked hinges which allow the door to fit flush to the door frame.Length 45cm