This is a box of 80 integral screw-in fencing fixtures. Offering full insulation for your fence tape or rope. The rope hole gives a 28mm offset from the post or 45mm for tape. Perfect for fastening to wooden posts or even a wall when using with a rawlplug. Offers good strength and versatility as the fixture will carry tapes up to 40mm and rope/twin to 6mm. See item code 41265 for drill attachment for ease of post fixing.* Plastic with metal screw* Box of 80 insulators* Carries up to 40mm tape* Carries fence rope* Black* Screw into wooden posts* Full insulation* Drill attachment can be purchased, code: 41265Here are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

This elastic rope gate set makes for easy access in an electric fence run. Set contains an insulated handle, to avoid shock. The handle has a hook to attach to the gate handle insulator and a 4.9 metre length of 6mm elastic rope to bridge the gate gap between posts. Rope fastens to a ring insulator that will carry wire, ropes and twines, and simply screws into a wooden post.* Ring insulator* Gate handle insulator* Insulated handle* 4.9 metre length of 6mm elastic ropeHere are the Top Ten rules to make your electric fence work properly!1 Keep your fence as free from growth as possible – Growth impairs the output of every commercial appliance and results in increased power consumption, especially with battery-driven appliances.2 Make sure that the earthing is optimal.3 Do not connect two conductive plastic wires by tying them – Use special conductors.4 Fence wire/tape/rope must not be broken.5 Use conductive material having the best possible conductivity – i.e. Low resistance.6 Keep fence wire and earthing rod free from rust – Rust is an insulator.7 Weather-beaten or nagged insulators are unsuitable – Causes a high loss of output.8 Ensure connection between the energiser and wire is optimal – Use cable resistant to high voltage for underground feeds.9 With battery-driven energisers, check battery condition regularly.10 Ensure that each point of the fence is live using an electric fence tester.

For infra red bulbs to a maximum of 250 watt.5 m rubber insulated power cord. Has ventilation slits for optimal air circulation. Aluminium protective cage with 21 cm dia and galvanised grid. Includes 2m long galvanised knotted link chain and ceiling hook (min 20kg lifting force. GS/GE approved for safety. In accordance with EN- Norm.Splashproof (IPX4)with safety insulation. Silicon sealed holder E27. Bulb not included.