
23.95 £
High quality, fitted with unique overload protection system, large stable base and notched saddle. Supplied with two-piece handle. Display carton except 20T which is Manufactured to EN1494 Specification...

233.95 £
Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. Made in the EU and fitted with safety overload valve. One-piece steel base, reservoir and pump cylinder design gives added strength. Supplied with zinc ...

242.95 £
Low entry design to suit low-slung vehicles. One-piece hydraulic unit. Two-piece handle with integral cog type release mechanism. Super Rocket Lift feature brings lifting arm into contact with jacking point with two or less strokes of the handle. Int...

1003.95 £
Long reach design for easier access to deep-set jacking points. One-piece hydraulic unit with hand or foot operation. Integral universal joint type release mechanism. One-piece handle lockable in three positions for storage and improved manoeuvrabili...

134.95 £
Heavy steel construction with bottle jack style power unit. Arms suitable for lifting bikes with a suitable structure, quads, all terrain vehicles, trikes and transmissions. Features mechanical safety lock to prevent inadvertent lowering and stabilis...

15.54 £
Replacement safety rubber jack pad for 3003CXQ....

48.95 £
Features width adjustment from 180 to 280mm, making it suitable for almost all sports bikes. Design ensures rim and tyre protection at all times. Once the bike is supported, allows easy removal and cleaning of front wheel. Please note all front paddo...

172.95 £
Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included. Capacity (Single Cable) : 200kg Capac...

1448.95 £
All steel construction with heavy-duty hydraulic ram. Supplied with separate, foot operated hydraulic pump and reservoir unit. Full width ramp and platform with chequer plate surface to ease loading and positioning of vehicle. Fitted with over-run gu...

43.95 £
Extremely short collapsed height makes this ram suitable for use where there is almost no clearance at the lift point. Unique ram and cylinder bearings absorb eccentric load stresses in order to protect the cylinder against abrasion, over-extension a...

377.95 £
Wide chassis provides extra stability and enables saddle to drop lower than standard design jacks. Full 360° rotating pump handle operates in any position. Precision valve allows delicate adjustment when taking out gearbox and realigning during repla...

22.95 £
Expert Quality , securely supports cylinder heads for most forms of service and repair applications. Heavy duty mild steel with zinc plated finish....

134.95 £
Screw type axle stands with ball bearing thrust-race for smooth operation - even under load. Includes height adjustment extension handle. Ideal for supporting and positioning heavy loads. Sold as singles. Capacity : 10tonne Minimum Height : 4...

233.95 £
Fitted with heat treated and ground, triple-spur geared shaft and pinion. Also includes mechanical load brake for extra safety. All chains are manufactured from hardened alloy material and load hooks feature safety latches. Compact gear housing allow...

89.95 £
Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral...

89.95 £
Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. Capacity...

152.95 £
Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. Capacity...

53.95 £
Cast base with threaded components for easy disassembly. Fully tested and fitted with overload valve to comply with the latest CE regulations. Fitted with carrying handle. Full parts availability. Capacity (tonne) : 20 Minimum Height (mm) : 2...

27.95 £
Cast base with threaded components for easy disassembly. Fully tested and fitted with overload valve to comply with the latest CE regulations. Full parts availability. Capacity (tonne) : 5 Minimum Height (mm) : 216 Maximum Height (mm) : 413...

9.95 £
Locating Pin for RPS3. Application : Triumph Size : Ø27mm...