
2.95 £
Type 8/180/300/E/J brad nails. Suitable for use with all Stanley brad nailers. Fits Stanley : TR200series, TRE500series, 69-702, 69-721 and SWK-BN125 Size : 15mm Qty : 1000 ...

1.95 £
Type 53 light-duty staple. Fits Stanley : TR45, 69-721, 69-701, 69-702 69-702, 69-720, 69-721, ST10 and ST14 staplers. Size : 8mm Qty : 1000 ...

11.95 £
16 gauge angle finish nails for use with : - Paslode® IM250A Nailer Dewalt DC618 Nailer ...

4.95 £
Tacwise Flat Wire Staple. Ideal for breather membrane (Tyvek, etc), building paper and insulation. For hand/electric staple guns and hammer takers using 140, T50, G type staples. Size : 14mm. Pack quantity : 2000. ...

5.95 £
Tacwise fine wire staple, commonly used for semi-industrial/DIY applications. This staple is thinner than 140 type and not so visible. Suitable for the Tacwise Z1-53, Z1-53l, Z1-53T, Z3-53, Z3-53L and the Hobby 53EL as well as the Arrow JT21...

4.95 £
Tacwise galvanised narrow corwn staples, ideal for a wide variety 2nd fix tasks. Suitable for 191EL Pro Stapler/Nailer, Tacwise 35 Duo Nailer/Stapler and Tacwise 50 Duo Nailer/Stapler. Size : 15mm. Pack quantity : 1000. ...

4.95 £
For use with 0328 Hobby 53EL Electric tacker/nailer...

4.49 £
Narrow Crown Staple. Length : 6mm Width : 9.5mm Packed Quantity : 1,440 ...

27.95 £
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and cov...

86.95 £
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor,...

87.95 £
The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter Meet the Eurocode 5 require...

88.95 £
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and cov...

31.95 £
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and cove...

21.95 £
ProStrip paper tape collated nails provide high holding power and ease of drive. Nail strip will not break when dropped and will not deteriorate in wet weather. Also, no collation material is left on the job site. ProStrip nails come in smooth and ri...

89.95 £
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, ...

79.95 £
PT Series Ring Shank Clipped Head 33° Nails & Fuel. Profile : Ring Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficul...

56.95 £
PT Series Ring Shank Clipped Head 33° Nails & Fuel. Profile : Ring Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficul...

26.95 £
BT13 Series Galvanised 18 Gauge Brad Nails and Fuel. To Suit GBT1850K Cordless Gas Brad Nailer Finish nails (Brads) and T nails are normally of a rectangular cross section instead of being round. Their diameters are less than the ...

22.95 £
SB16 series galvanised 16 gauge straight finish nails & fuel cell to suit GFN1664K cordless nailers. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery ...

8.95 £
18 gauge galvanised Brad nails for use with Brad Nailers. Specifications : Length - 20mm Quantity - 5000 Compatible Brad Nailers : Stanley Bostitch BT1855-E Draper 57563 Rapid ESN114 Stanley Bostitch SB1850-BN Draper ...