16 gauge Finish nails for use with : - Tacwise DFN50, DFN50WHH and FFN64LHH air powered nailers. ...

PT PaperTape Series Smooth Shank Clipped Head 33° Nails & Fuel. Profile : Smooth Smooth shank nails have exactly that : a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most...

PT Series Ring Shank Clipped Head 33° Nails & Fuel. Profile : Ring Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficul...

PT Series Ring Shank Clipped Head 33° Nails & Fuel. Profile : Ring Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficul...

PT PaperTape Series Smooth Shank Clipped Head 33° Nails & Fuel. Profile : Smooth Smooth shank nails have exactly that : a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most...

PT Series Ring Shank Clipped Head 33° Nails & Fuel. Profile : Ring Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficul...

BT13 Series Galvanised 18 Gauge Brad Nails and Fuel. To Suit GBT1850K Cordless Gas Brad Nailer Finish nails (Brads) and T nails are normally of a rectangular cross section instead of being round. Their diameters are less than the ...

PT PaperTape Series Smooth Shank Clipped Head 33° Nails & Fuel. Profile : Smooth Smooth shank nails have exactly that : a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most...

BT13 Series Galvanised 18 Gauge Brad Nails and Fuel. To Suit GBT1850K Cordless Gas Brad Nailer Finish nails (Brads) and T nails are normally of a rectangular cross section instead of being round. Their diameters are less than the ...

Brads for use with the Rapid MS 4-in-1 Tacker model. Type : Brads Length : 15mm Box : 1000 ...

The DeWalt range of Hot Dipped Galvanised Ring Nails are qualified to Eurocode 5 standard and are suitable for any site environment. These nails are fully tested to work with the DeWalt framing nailer, providing the best level of performance...

This DeWalt range of clipped head nails are qualified to Eurocode 5 standard and cover Service classes 1,2 & 3. The nails are suitable for any site environment. The nails are fully tested to work with the DEWALT framing nailer, providin...

The DeWalt range of Hot Dipped Galvanised Ring Nails are qualified to Eurocode 5 standard and are suitable for any site environment. These nails are fully tested to work with the DeWalt framing nailer, providing the best level of performance...

Nails 18gauge 50mm. Pack of 5000. Length (mm) : 50 Pack Qty : 5000 Application : SA791, SA792, SA793...

Brad Nails to fit Arrow Staplers T50PBN, ET100 and ET200 Brown Head Brad/Nails . 2,000 per pack. Size. 25mm (1 in) ...

Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is a...

BT13 Series 18 gauge brown Brad nails for use with the Bostitch brad nailer. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily u...

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistence to damp environments. 28° Collation Angle Designed for the construction mar...

Narrow Crown Staple, Type 5 Ideal for fabric, cardboard, wood and carpet. Pack of 14 mm staples to suit B/DA5753 Powershot heavy-duty Stapler. Narrow Crown Staple. Length : 14 mm Width : 9.5 mm Packed Quantity 1440...

Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails ...