The powerful GSC 2.8 Professional handy shears from Bosch are used in metalworking for cutting, for example, sheet metal and plates made of steel, and for curved cuts. Features & Benefits : &bull Slim design with planetary gears &...

These accessories are suitable for use with the internal and external profiles, and are included in the starter pack with external profiles. Desciption. Wing Nuts (4)....

An assortment O-rings, size range 3mm I.D. x 1.5mm section to 50mm I.D. x 3.5mm section. Packed in blow mould storage case with display sleeve....

Manufactured from Buna-N. Suitable for personal & professional workshops, garages and plumbing. Supplied in partitioned interspaced case. Contents : 3 x 1.5, 4 x 2, 5 x 2, 7 x 1.5, 10 x 1.5, 13 x 1.5, 10 x 2.5, 11 x 2.5, 13 x 2.5, 14 x 2.5, 16 ...

Cotter pin assortment. Partitioned case. Contents : 1.5 x 25, 2.5 x 30, 2.5 x 40, 2.7 x 32, 2.7 x 55, 3.6 x 70mm...

Rubber O-ring assortment in popular sizes. Partitioned case. Contents : 3 x 1, 4 x 1, 4.5 x 2, 5 x 2, 6 x 2, 6 x 2.5, 6 x 3, 7 x 2, 8 x 2, 9 x 2, 10 x 2, 12 x 3, 13 x 3, 14 x 2.5, 17 x 2.5, 18 x 4, 20 x 2, 22 x 2mm...

Assortment of O-rings in plastic storage case....

Assortment of zinc plated split pins in plastic storage case....

Hair pin assortment. Partitioned case. Contents : 2 x 33mm, 2 x 40mm, 2.4 x 31mm, 2.8 x 42mm, 3.5 x 45mm, 4 x 75mm...

Roll pin assortment. Partitioned case. Contents : 3/8 x 3/4, 3/8 x 1-1/2, 3/8 x 2, 1/16 x 3/16, 1/16 x 5/16, 1/16 x 3/4, 5/64 x 1/4, 5/64 x 1/2, 5/64 x 1, 3/32 x 5/8, 3/32 x 1, 3/32 x 1-1/4, 5/32 x 5/8, 5/32 x 1, 5/3...

Double end tool suitable for use with all types of O-ring and grease seal. Knurled barrel gives extra grip to greasy hands....

A beechwood tensioning tool for upholstery webbing. Rebated on one edge and slotted for frame location and slotted with peg on retaining chain. The webbing is looped through the slot and held by the dowel so that the stretcher can adjust the tensi...

This tank cutter has a straight shank with 3 flats upon it to ensure a positive drive when used in 3 jaw chuck. This tank cutter is suitable for use in a hand held brace or drill stand. The cutting blade is manufactured from heat-treated...

This sdjustable tank cutter has a staight shank with a hardened carbon steel cutter blade and a separate high speed steel pilot drill. Suitable for use on most tank materials, steel, plastic, copper etc and is suitable for use in hand held po...

Monument Turnpin made from solid polypropylene for flaring lead pipe prior to jointing two pipes of equal diameter. Monument 604K Turnpin Size : 50mm (2 in). ...

Monument Olive Puller 15/22mm is ideal when removing 15 mm or 22 mm olives from copper piping without damaging the attached pipe. This puller simply utilises the compression fitting locking nut to remove the olive from the tube. With a...

Scottool TBS1 Double ended box spanner for quick assembly of most 1/2 in & 3/4 in brass and nylon tap backnuts. Zinc plated steel with holes for tommy bar. ...

The Monument olive cutting tool is designed to remove an olive from copper pipe without damaging the pipe and without producing swarf/debris. NOTE : DO NOT attempt to remove stainless steel olives with this tool. Made in Britain. ...

Monument zinc plated pop up waste tool for the difficult task of holding a pop up waste in position when installing into sinks, baths, basins or bidets. The two spring steel blades fit into the circumferential slots in the waste which can be...

Monument Compression Fitting Spanner double ended spanner for tightening and loosening most 15 and 22 mm compression fitting nuts. Size : 15/22 mm. ...