A popular precision external micrometer. Furnished with ratchet stop, lock nut and carbide faces. Rigid one piece steel frame, ribbed for extra strength and tapered for use in narrow slots. Size 1-2 in Graduation : 0.001 in ...

Full size surface gauge, stable steel base, fully hardened and ground with four gauge pins, frictionally held which can be pushed down for referencing the tool. Will hold scribers, rods or indicator stems ranging from 2.4 to 6.35mm (3/32 to 1/4 in...

A versatile tool that allows the angle and depth to be measured simultaneously. The protractor features deep etched graduations 0 - 180° in opposite directions permitting the reading of both the direct and supplementary angles. The rule is graduat...

Solid steel stocks with hardened, tempered and finely polished blades. The squareness of the blade edges and the stock working face falls within ۪.016mm/0.0064 tolerance. Manufactured to BS 939 Workshop Grade B for squareness tolerance...

Tapered frame on the anvil side for hard to reach places. Suitable for all external measurements. Features : - Heavy-duty version available Carbide tipped measuring faces Clear graduations on satin chrome finish Spindle loc...

Metric graduated 13 blade feeler gauge. Sizes 0.05 to 1.00mm. Blade dimensions 95 x 10mm. Blade Sizes : 0.050, 0.100, 0.150, 0.200, 0.250, 0.300, 0.400, 0.500, 0.600, 0.700, 0.800, 0.900, 1.000mm...

Precision mechanism with 55mm dial and locking, rotating bezel. Interchangeable foot. Type : Metric Deflection/Travel : 10mm Graduation : 0.01mm Shank Size : Ø8mm...

High quality, hardened and tempered stainless steel calliper. Dual locking carriage with micro-thumb adjustment. Metric and Imperial scales graduated in 0.02mm and 0.001. Supplied in storage case. Range : 0-150mm/0-6...

Imperial graduated, 36 blade, feeler gauge. Dual marked in Imperial and Metric. 30 x Steel blades and 6 x brass blades for non-magnetic applications on electronic ignition systems. Blade dimensions 75 x 13mm. Blade Sizes : Imperial Steel : 0...

Precision ground base with rotary magnetic control. Articulated arm with rotary lock. Combination dial and scribing clamp with fine adjustment control. Maximum Height : 370mm Footprint : 64 x 50mm...

Designed for use with dial indicators, incorporating an on/off switch which controls the powerful magnetic base. It can be adjusted to any position and locked. Description : Magnetic base with upright base post, snug, rod, indicator attachmen...

Precision measuring instrument set containing six essential tools for the engineer/tradesman. Contents : Vernier Callipers, Depth/Angle Gauge, Outside Callipers, Dividers, Inside Callipers, Pocket Rule with Clip...

Expert Quality , with enamelled frame, heat plates, satin chrome thimble and sleeve. Carbide tipped measuring anvils, lock and ratchet stop. Graduations 0.001mm and 0.0005. Ball end cap for measuring curved surfaces. Supplied with SR44...

Expert Quality , with enamelled frame, heat plates, satin chrome thimble and sleeve. Graduations 0.01mm. Carbide tipped anvils, lock and ratchet stop. Supplied in plastic storage case and...

Expert Quality , ideal all-round kit for engineers and apprentices. Dial test indicators accuracy 0.01mm. Packed in blow mould case with display sleeve. Contents : •   Metric dial test indicator (0-25mm) w...

Hardened and tempered stainless steel dual powered digital calliper with satin finish. Solar powered but also with additional battery cell (CR2016). When light is above 200LUX the solar panel will provide the power and below 200LUX the power will be ...

General purpose gauge with carbon fibre components fitted with metric/imperial digital LCD display. Can be used for internal and external measurements....

Ultra-Fast and Water resistant, this ground breaking Micrometer is suitable for use in areas when there is a high risk of coolant splash. Large LCD display for error free external measurements. QuantuMike overcomes this limitation by combining a prec...

Expert Quality , 100mm long taper blades, hardened and polished for long accurate life. Each blade is marked with its size and folds into a polished steel case with thumbscrew. Blade sizes : 20 metric blades size : 0.05, 0.10,...

100mm long taper blades. Each blade is marked with its size and folds into a plated steel case with thumbscrew. Blade sizes : Imperial : 0.0015, 0.002, 0.003, 0.004, 0.006, 0.008, 0.010, 0.012, 0.015, 0.025...