Decorative cavetto cutter for raised panelling or edge moulding. Dimensions : Diameter : 22mm Cutting Length : 11mm Cutting Radius : 10mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown...

Complete with one bearing. Dimensions : Diameter : 19.1mm Cutting Length : 16mm Bearing Diameter : 19.1mm Cutting Radius : 6.35mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown below...

Primarily water channel cutter. Also produces radiused rebates and grooves. Suitable for plunge cutting. Dimensions : Diameter : 16 mm Cutting Length : 25 mm Cutting Radius : 5 mm Shank Diameter : 1/2 inch Please note that prices...

The shank mounted bearing is used to accurately guide the set for cove mouldings. The three end mounted bearings are interchanged to vary the lower quirk on the ovolo moulds. Can be used portably or in a router table. Dimensions : Dia...

Oversize profiler allows component to be routed oversize to template. Useful when making jigs, templates and patterns. Can be used for trenching operations in shallow passes. Dimensions : Diameter : 8mm Cutting Length : 19mm Rebate...

A router drilling tool to create a radius pip or dome in timber. Useful for carvings. Dimensions : Diameter : 9mm Cutting Length : 9mm Cutting Radius : 2.5mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogu...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. With Solid Carbide insert rather than brazed tip. Dimensions : Diameter : 2.5mm Cutting L...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. With Solid Carbide insert rather than brazed tip. Two flute cutter specifically designed for inla...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Dimensions : Diameter : 9/32 inch Diameter : 7 mm Cutting Length : 19 mm Shank Diameter : ...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Cutter has a TCT centre tip. Dimensions : Diameter : 3/8 inch Diameter : 9.5mm Cutting ...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Especially suited for drilling, but to detriment of clearance at high feed rates

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 15/32 inch Diameter : 12mm Cutting Length : 19mm...

Trend Dovetail A=100í X 14mm Dia (Tct Router Cutter Range / Dovetail) For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Dimensio...

For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Left hand rotation. Purpose made for stair trenching machines. Dimensions : ...

For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Left hand rotation. Purpose made for stair trenching machines. Dimensions : ...

For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Right hand rotation. Purpose made for stair trenching machines. Dimensions :

Heavy duty arbor with spacers for 12mm bore slotters with or without bearings.. Dimensions : Overall Length : 83 mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the ...

Heavy duty arbor with spacers for 12mm bore slotters with or without bearings.. Dimensions : Overall Length : 83 mm Shank Diameter : 3/8 inch Please note that prices in the Trend Catalogue download, if shown below, may differ to the ...

Slotters with M12x1.0. threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor enables 12mm bore guide bearings to be fitted...

Standard duty arbor with 1/4 inch spindle and spacers. Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positions. Use shims/spacers to prevent bearings with larger diameters, touching the tips of the slott...