Roman ogee with self guiding facility. To change profile use larger bearing and vary the depth. Supplied with two bearings. Dimensions : Diameter : 34.9mm Cutting Length : 20mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : ...

The two bearings offer the means of cutting different depths of mouldings. Two bearings are supplied. Dimensions : Diameter : 22.2mm Cutting Length : 14.3mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 6.3mm Shank Diameter : ...

The two bearings offer the means of cutting different depths of mouldings. Two bearings are supplied. Dimensions : Diameter : 25.4mm Cutting Length : 14.3mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 7.9mm Shank Diameter : ...

The two bearings offer the means of cutting different depths of mouldings. Two bearings are supplied. Dimensions : Diameter : 41.3mm Cutting Length : 18mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : 16mm Shank Diameter : 1/2...

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing t...

Trend B/Guided Cham A=45í X 51.5mm Dia (Tct Router Cutter Range / Chamfer) Supplied with one bearing. Dimensions : Diameter : 51.5mm Cutting Length 1 : 19mm Cutting Length 2 : 26mm Bearing Diameter : 12.7mm Angle : 45 degrees S...

Two bearings are supplied for an optional lower quirk. Larger bearing removes the quirk. Dimensions : Diameter : 30mm Cutting Length : 13mm Bearing Diameter : 12.7mm & 16mm Cutting Radius : 5mm Shank Diameter : 1/4 inch Ple...

Supplied with one bearing. Dimensions : Diameter : 26.1mm Cutting Length : 25.4mm Bearing Diameter : 12.7mm Cutting Radius : 6.8mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catalogue download, if shown belo...

Self-guiding cutter with facility to change profile by fitting large bearing & varying the depth. Supplied with two bearings. Dimensions : Diameter : 41.3mm Cutting Length : 17.5mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius : ...

Self-guiding cutter with facility to change profile by fitting large bearing and varying the depth. Supplied with two bearings. Dimensions : Diameter : 35mm Cutting Length : 17.5mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius 1...

Cut a wider edge line, at an angle of 82 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Dimensions : Diameter : 15 mm Cutting Length : 12 mm Bearing Diameter : Frac...

Bearing guided classic style cutter. Supplied with two bearings. Dimensions : Diameter : 32mm Cutting Length : 12.7mm Bearing Diameter : 12.7mm & 16mm Cutting Radius : 5mm Shank Diameter : 1/2 inch Please note that prices in...

Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. Dimensions : Diameter : 35mm Cutting Length : 22mm Bearing Diameter : 9.5mm & 12.7mm Cutting ...

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should b...

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap should b...

Trend Trimmer A=90í X 20mm Dia (Tct Router Cutter Range / Laminate Trimmers) For trimming the lipping of plastic overlay, and for rebating and machining wood, Duralium and plastics. Dimensions : Diameter : 20mm Cutting Length : ...

Trend Bevel Trim A=30í X 24mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cutter for trimming and bevelling timber, lippings and plastic laminate. Can only be used in laminate trimming routers, or when straight fence guides are introd...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With narrow neck for deep entry into second web of extrusions.