Trend Bevel Trim A=80í X 20mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cut a wider edge line, at an angle of 80 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges.

Large triple radii cutter for shelving and cappings etc. Dimensions : Diameter : 47.3mm Cutting Length : 23.8mm Bearing Diameter : 12.7mm Cutting Radius : 6mm Shank Diameter : 1/2 inch Please note that prices in the Trend Catal...

Self-guiding cutter with facility to change profile by fitting large bearing and varying the depth. Supplied with two bearings. Dimensions : Diameter : 28.5mm Cutting Length : 12.7mm Bearing Diameter : 9.5mm & 12.7mm Cutting Radius...

Trend Bevel Trim A=60í X 28mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cut a wider edge line, at an angle of 60 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges.

Trend Bevel Trim A=45í X 27mm Dia (Tct Router Cutter Range / Laminate Trimmers) Cut a wider edge line, at an angle of 45 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges.

Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings. Dimensions : Diameter : 38mm Cutting Length : 16mm Bearing Diameter : 12.7mm & 16mm Cutting R...

The glazing bar ovolo cutter is bearing guided to speed setting-up and to enable curved frames to be moulded. Dimensions : Diameter : 27mm Cutting Length : 17mm Bearing Diameter : 9.5mm Cutting Radius : 17mm Shank Diameter : 1/4 inch

Trend Trimmer A=90í X 20mm Dia (Tct Router Cutter Range / Laminate Trimmers) For trimming the lipping of plastic overlay, and for rebating and machining wood, Duralium and plastics. Tungsten Carbide Tipped. Use at speed 12000 - 2400...

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Dimensions : Diameter : 12.7mm Cutting Length : 28mm Shank Diameter : 3/8 inch Please not...

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Dimensions : Diameter : 9.5mm Cutting Length : 25mm Shank Diameter : 3/8 inch Please note...

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Will trim bottom and top laminate simultaneously. Dimensions : Diameter : 12.7mm Cutting L...

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Recess will require final trimming square with a hand chisel. Dimensions : Diameter : 19.1mm Cutting Length : 19mm Sha...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium an...

Cutter is designed to plunge and machine or mill lateral slots. Material should be securely clamped. For drilling and slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a specia...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With narrow neck for deep entry into second web of extrusions.

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With narrow neck for deep entry into second web of extrusions.

Cutter is designed to plunge and machine or mill lateral slots. For plastic with long shank. Use at speed 10000 - 12000 RPM. Dimensions : Diameter : 5mm Cutting Length : 40mm Overall Length : 100mm Shank Diameter : 8mm Ple...

Cutter is designed to plunge and machine or mill lateral slots. Material should be securely clamped. For plastics only. Use at speed 10000 - 12000 RPM. Dimensions : Diameter : 5mm Cutting Length : 45mm Overall Length : 100mm ...

Cutter is designed to plunge and machine or mill lateral slots. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With narrow neck for deep entry into second web of extrusions.

60 degree Taper Point with slow spiral is sometimes preferred for drilling end grain in wood. Ideal for fast drilling operations in open grained material. Not for use with routers and not suitable for masonry work. Dimensions : Diamet...