Used for cutters with shank mounted bearings. Pack includes one collar, grub screw and hex key. Dimensions : IDiameter : 3/8 inch ODiameter : 15.8mm Hex key 1/16 inch Please note that prices in the Trend Catalogue download, if ...

Used for cutters with shank mounted bearings. Pack includes one collar, grub screw and hex key. Dimensions : ID = 1/4 inch OD = 11mm Hex key-1/16 inch Please note that prices in the Trend Catalogue download, if shown below,...

Used for cutters with shank mounted bearings. Pack includes one collar, grub screw and hex key. Dimensions : IDiameter : 3/8 inch ODiameter : 15.0mm Hex key 1/16 inch Please note that prices in the Trend Catalogue download, if ...

Multi-Mould cutter from the Dolls house cutter set. Dimensions : Diameter : 22 mm Cutting Length : 13 mm Cutting Radius : 3.5 mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown below, m...

Triple Classic Ovolo cutter from the Dolls house cutter set. Dimensions : Diameter : 5/8 inch Diameter : 15.9 mm Cutting Length : 8.3 mm Cutting Radius 1 : 1.0 mm Cutting Radius 2 : 1.5 mm R3=2.0 mm Shank Diameter : 1/4 inch

Triple Bead cutter from the Dolls house cutter set. Dimensions : Diameter : 15 mm Cutting Length : 15.2 mm Cutting Radius 1 : 0.75 mm Cutting Radius 2 : 1.0 mm R3=1.5 mm Shank Diameter : 8mm Please note that prices in the Tr...

Trend Leigh D/Tail A= 98í X 17.5mm Dia (Tct Router Cutter Range / Dovetail) Cutter for use with the Leigh Dovetail Jig. This cutter has an extra long shank. Dimensions : Diameter : 17.5mm Cutting Length : 25mm Overall Length : ...

The jig requires a router fitted with a 30mm guide bush and 12mm diameter long reach cutter. For most common sash mortise and dead locks, with up to 3 inch deep mortises and a 7/8 inch or 1 inch face-plate. Deeper mortises can be achieved with a s...

Multi-Profile Router Cutter System. A revolutionary new cutter system. Offers a variety of interchanging solid carbide blades. The Nova System uses replaceable solid carbide blades offered in a number of profile shape options. This enabl...

Super hard grade of carbide to be used with the advantages of longer life and better performance over a long period. Two carbide blades are fitted to the body and they are designed to provide integral chip limitation to prevent kickback. Unguid...

This 8mm shank panel door set consist of one profile scriber cutter and one matching panel cutter. They can be used in lower powered machines of minimum 900 watts, once an 8mm collet is fitted and used in a fixed mode. Details of each cutter ca...

The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe. For a range of complimentary panel mould cutters.

The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe. For a range of complimentary panel mould cutters.

This versatile 1/2 inch shank groover set offers an infinitely variable grooving width and jointing facility with a self guided bearing option. It comprises a set of four groovers and an arbor which may be used singly or together to produce a wide...

Replacement Solid Carbide blades. Supplied in a wallet. Dimensions : Length = 30.0mm Width = 9.0mm Thickness = 1.5mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, ...

Replacement Solid Carbide blades. Supplied in a protective plastic box. Dimensions : Length= 8.4mm Width= 5.6mm Thickness= 1.1mm Quantity= 10 Please note that prices in the Trend Catalogue download, if shown below, may di...

Replacement cutter for use on 18mm floor thickness. Dimensions : 1/4 inch shank cutter For use on 18mm floor thickness Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as th...

For 22mm thick floors a pack of 250 ROUTABOUT Rings. Dimensions : For 22mm thick floors. Pack of 250 Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the...

Should be used in a standing drill press, mill, lathe or a CNC drilling machine. Dimensions : Rec. speeds : MDF 300 - 3,800RPM Hardwood 300 - 2,000RPM (straight & close grained) Please note that prices in the Trend Catalogue download...

Designed to mill slots in both plastic and non-ferrous metal. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With M10 x 1.5 internal thread, for UPVC plastics and aluminium.