Super hard grade of carbide to be used with the advantages of longer life and better performance over a long period. Two carbide blades are fitted to the body and they are designed to provide integral chip limitation to prevent kickback. Unguid...

Multi-Profile Router Cutter System. A variety of interchanging solid carbide blades. The Nova System uses replaceable solid carbide blades offered in a number of profile shape options. This enables a super hard grade of carbide to be used wi...

Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling. PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime. Use in fixed head, NC or CNC ...

Polycrystalline Diamond tipped cutter gives a significant increase in tool life compared to TC tooling. PCD also gives an accuracy of cut throughout the tool life and faster feed rates as well as reduced downtime. Use in fixed head, NC or CNC ...

This 8mm shank panel door set consist of one profile scriber cutter and one matching panel cutter. They can be used in lower powered machines of minimum 900 watts, once an 8mm collet is fitted and used in a fixed mode. Details of each cutter ca...

This 1/2 inch shank panel door set consists of one profile scriber cutter and a matching bearing guided panel cutter. Details of each cutter can be found on their relevant pages. The panel raising cutters should be run at a max. speed on a stat...

This Profile Scriber produces the same type of joint, and use the same components as the standard PSC sets. Both parts of the joint are cut by only changing the cutter height. No reassembly of parts is required, to convert the tool from scribin...

All in one system for quick profile scribing. Both parts of the joint are cut by simply adjusting the cutter height. No re-arrangement of the parts is required to convert the tool from scribing mode to profiling mode and vice versa. Dimensi...

The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe. For a range of complimentary panel mould cutters.

The classic method of producing cabinet panelled door and drawer fronts is made easy with the Profile Scriber set. The components are rearranged on the arbor to cut the profile or the scribe. For a range of complimentary panel mould cutters.

Replacement Solid Carbide blades. Supplied in a wallet. Dimensions : Length = 7.5mm Width = 12.0mm Thickness = 1.5mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, ...

Replacement Solid Carbide blades. Supplied in a protective plastic box. Dimensions : Length = 7.5mm Width = 12.0mm Thickness = 1.5mm Quantity = 10 Please note that prices in the Trend Catalogue download, if shown below, m...

Replacement Solid Carbide blades. Supplied in a wallet. Dimensions : Length = 12.0mm Width = 12.0mm Thickness = 1.5mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices,...

Replacement cutter for use on 22mm floor thickness. Dimensions : 1/2 inch shank cutter For use on 22mm floor thickness Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as th...

Should be used in a standing drill press, mill, lathe or a CNC drilling machine. Can be used to cut the rosette free to form a button. Dimensions : Rec. speeds : MDF 300 - 3,800RPM Hardwood 300 - 2,000RPM (straight & close grained)

Should be used in a standing drill press, mill, lathe or a CNC drilling machine. Can be used to cut the rosette free to form a button. Dimensions : Rec. speeds : MDF 300 - 3,800RPM Hardwood 300 - 2,000RPM (straight & close grained)

Should be used in a standing drill press, mill, lathe or a CNC drilling machine. Can be used to cut the rosette free to form a button. Dimensions : Rec. speeds : MDF 300 - 3,800RPM Hardwood 300 - 2,000RPM (straight & close grained)

Made from tool steel which accurately supports a pair of removable tungsten carbide knives. Should be used in a standing drill press, mill, lathe or a CNC drilling machine. Knives not included in set. Dimensions : Shank is 1/2 inch in ...

Designed to mill slots in both plastic and non-ferrous metal. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With M10 x 1.5 internal thread, for UPVC plastics and aluminium.

Designed to mill slots in both plastic and non-ferrous metal. Aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. With M10 x 1.5 internal thread, for UPVC plastics and aluminium.