TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Cutter has a TCT centre tip. Dimensions : Diameter : 3/8 inch Diameter : 9.5mm Cutting ...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Cutter has a TCT centre tip. Dimensions : Diameter : 25/64 inch Diameter : 10mm Cutting...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Cutter has a TCT centre tip. Dimensions : Diameter : 25/64 inch Diameter : 10mm Cutting...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 15/32 inch Diameter : 12mm Cutting Length : 25mm...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Cutter has a TCT centre tip. Dimensions : Diameter : 7/16 inch Diameter : 11mm Cutting ...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. TCT centre tip. Dimensions : Diameter : 1/2 inch Diameter : 12.7mm Cutting Length : 32mm...

Two flutes for clean finish. Suitable for plunge routers. Dimensions : Diameter : 1/2 inch Diameter : 12.7mm Cutting Length : 32mm Shank Diameter : 3/8 inch Please note that prices in the Trend Catalogue download, if shown bel...

TCT for abrasive materials such as chipboard, MDF, plywood and certain hardwoods. Two flutes for clean finish. Suitable for plunge routers. Has no centre TC tip and is not suitable for plunging. Dimensions : Diameter : 1/2 inch D...

Trend Dovetail A=105í X 22mm Dia (Tct Router Cutter Range / Dovetail) For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Dimensio...

For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Purpose made for stair housing jigs. Dimensions : Diameter : 14mm Cutting Leng...

For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Purpose made for stair housing jigs. Dimensions : Diameter : 16mm Cutting Leng...

For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Right hand rotation. Purpose made for stair trenching machines. Dimensions :

For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails. Left hand rotation. Purpose made for stair trenching machines. Dimensions : ...

Replacement arbor for an 8mm bore tool. Dimensions : Overall Length : 76 mm Shank Diameter : 8mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalo...

Replacement arbor for the PSC/106X1/2TC Dimensions : Overall Length : 97 mm Shank Diameter : 1/2 Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalo...

Designed to accommodate the Schlegel Aquamac 63 weather strip system. Allows for a particularly small gap between sash and frame. The slot can be positioned part way down the side of the rebate, or at the bottom of the rebate. Must be used ...

A complete cutter set for producing matchlining. Jointing parts are interchanged on the arbor to change the mode of the cutter. This set can be converted to Ref. 338X1/2TC, and vice-versa, by purchasing the respective groover. Dimensio...

Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a 12mm clear bore. Can be mount...

Ensure slotter is fitted the correct way onto the arbor with respect to the direction of rotation. Bearings and slotter should be fitted as near to the shank as possible to avoid vibration. This slotter has a M12 threaded boss to enable it to...

Allows decorative cuts in panels and frames to disguise glue lines. Dimensions : Diameter : 36 mm Angle : 60 degrees Bore=1/4 inch Kerf=6mm Please note that prices in the Trend Catalogue download, if shown below, may differ to ...