Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

Two fluted Tungsten Carbide Tipped straight cutters. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Has a bottom cut feature....

Single fluted Tungsten Carbide straight cutter for fast free cutting. This cutters has extra clearance and gives a stronger backing support to the tip. Single flute should be chosen where speed and clearance rates are more important than the f...

Single fluted Tungsten Carbide straight cutter for fast free cutting. This cutters has extra clearance and gives a stronger backing support to the tip. Single flute should be chosen where speed and clearance rates are more important than the f...

This dovetail cutter produces a tight reliable joint for drawers, boxes etc. Dimensions : Diameter : 9.5mm Cutting Length : 9.5mm Overall Length : 43mm Angle : 99 degrees Shank Diameter : 1/4 inch Please note that prices in the...

Two flute cutter for producing extra clean cut bevelled edges. No plunge cut. Dimensions : Diameter : 25.4mm Cutting Length : 10mm Angle : 60 degrees Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue dow...

This staff bead is ideal for producing nosings and attractive edges. Edge cut only. Dimensions : Cutting Length : 12.7mm Cutting Radius : 2.8mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, i...

Ovolo cutter designed for sash bars but useful for decorative edging. Dimensions : Diameter : 19.1mm Cutting Length : 12.7mm Cutting Radius : 6.3mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download...

Ovolo cutter designed for sash bars but useful for decorative edging. Dimensions : Diameter : 22.2mm Cutting Length : 14.3mm Cutting Radius : 7.9mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download...

Self-guiding cutter for rounding over edges, without the need for a side fence. If cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D...

Self-guiding cutter for rounding over edges, without the need for a side fence. If cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D...

By raising the cutter, the top quirk is removed. Dimensions : Cutting Length : 15.9mm Bearing Diameter : 9.5mm Cutting Radius : 4mm Shank Diameter : 1/4 inch Please note that prices in the Trend Catalogue download, if shown below...

Panelling cutter with shank mounted bearing is ideal for following templates. Template should be 5mm thicker than cut length of tool. Dimensions : Cutting Length : 12.7mm Bearing Diameter : 22mm Cutting Radius 1 : 4mm Cutting Radius...

For picture hanging flush to the wall. Plunge cutter & move forward, then retract out from entry hole. A template is recommended. Dimensions : Diameter : 9.5mm D2=4.5mm Cutting Length : 4.5mm Shank Diameter : 1/4 inch Plea...

Three flute self-guiding for extra fine trimming of laminate or plywood overlay. Dimensions : Diameter : 12.7mm Cutting Length : 12.7mm Bearing Diameter : 12.7mm Shank Diameter : 1/4 inch Please note that prices in the Trend Cata...

This two wing Tungsten Carbide Tipped slotting cutter is ideal for grooving and rebating operations. A 1/2 inch diameter bearing is supplied with the cutter. Depth of cut (E) can be changed by purchasing alternative bearing sizes. Easy to se...

This two wing Tungsten Carbide Tipped slotting cutter is ideal for grooving and rebating operations. A 1/2 inch diameter bearing is supplied with the cutter. Depth of cut (E) can be changed by purchasing alternative bearing sizes. Easy to se...

This two wing Tungsten Carbide Tipped slotting cutter is ideal for grooving and rebating operations. A 1/2 inch diameter bearing is supplied with the cutter. Depth of cut (E) can be changed by purchasing alternative bearing sizes. Easy to se...

This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing. The set is supplied with three ball bearing guides to suit the three sizes of biscuits available. A slightly longer cut than the length of the bis...

Should be used with a router of minimum power rating of 750 watts. It should be fitted in a router table which has an adjustable backfence and a mitre fence or workholding jig attachment. For use in a router table only Timber thickness are M...