Hex Head Washer Face Self - Drilling Screws Features : Manufactured to mechanical specification SAE J78-1979 to achieve a surface hardened up to 650 HV to prevent torque shearing under load and a core hardness of up to 400 HV for improved ...

Hex Head Washer Face Self - Drilling Screws Features : Manufactured to mechanical specification SAE J78-1979 to achieve a surface hardened up to 650 HV to prevent torque shearing under load and a core hardness of up to 400 HV for improved ...

Features : Pan Head, Cross-Recess, AB Point. - Designed and manufactured to the BS 4174. - Case hardened to prevent both shearing under load and resistance to excess torque pressure. - Plated in Trivalent Chromium (CR3) zinc 3 microns.

Features : Pan Head, Cross-Recess, AB Point. - Designed and manufactured to the BS 4174. - Case hardened to prevent both shearing under load and resistance to excess torque pressure. - Plated in Trivalent Chromium (CR3) zinc 3 microns.

Features : Flange Head, Cross-Recess, AB Point. - Designed and manufactured to the BS 4174. - Case hardened to prevent both shearing under load and resistance to excess torque pressure. - Plated in Trivalent Chromium (CR3) zinc 3 microns...

Features : Pan Head, Cross-Recess, AB Point. - Designed and manufactured to the BS 4174. - Case hardened to prevent both shearing under load and resistance to excess torque pressure. - Plated in Trivalent Chromium (CR3) zinc 3 microns.

Features : Countersunk Head, Cross-Recess, AB Point. - Designed and manufactured to the BS 4174. - Case hardened to prevent both shearing under load and resistance to excess torque pressure. - Plated in Trivalent Chromium (CR3) zinc 3 mi...

Features : Pan Head, Cross-Recess, AB Point. - Designed and manufactured to the BS 4174. - Case hardened to prevent both shearing under load and resistance to excess torque pressure. - Plated in Trivalent Chromium (CR3) zinc 3 microns.

Features : Countersunk Head, Cross-Recess, AB Point. - Designed and manufactured to the BS 4174. - Case hardened to prevent both shearing under load and resistance to excess torque pressure. - Plated in Trivalent Chromium (CR3) zinc 3 mi...

Zinc wafer head self-drilling screws. Features : No.2 self-drilling tip. - Manufactured to mechanical specification SAE J78-1979 to achieve a surface hardness up to 650 HV to prevent torque shearing under load and a core hardness of up ...

Features : Head Size 8mm / 5/16 Double Slash Point - Thread Type Self-Tapping - Washer type G/EPDM washer G = Galvanised Steel - Plating Ruspert - Salt Spray Resistance 500+ hours (UKAS accredited) Specification : Box Qty100

Features : Head Size 8mm / 5/16 Double Slash Point - Thread Type Self-Tapping - Washer type G/EPDM washer G = Galvanised Steel - Plating Ruspert - Salt Spray Resistance 500+ hours (UKAS accredited) Specification : Box Qty : 100

Features : Recess Phillips - Metric (Fully threaded up to 85mm, thereafter partially threaded) - Drill Point 5 - Plating Zinc plated - 6 ribs on countersink to assist completion of countersinking Specification : Box Qty100

Features : Recess Phillips - Metric (Fully threaded up to 85mm, thereafter partially threaded) - Drill Point 5 - Plating Zinc plated - 6 ribs on countersink to assist completion of countersinking Specification : Box Qty200

Features : Head Size 8mm / 5/16 - Drill Point 5 - Thread Type Metric with torque relieving slot and flutes Washer type G/EPDM washer G = Galvanised Steel - Fixed Washer 14mm Plating Ruspert - Salt Spray Resistance 500+ hours (UKAS accre...

Features : Head Size : 8mm / 5/16 - Thread Type Self-Tapping - Fixed Washer : 14mm - Drill Point : 3/5 - Washer type G/EPDM washer G = Galvanised Steel - Plating Ruspert Specification : Box Qty : 100 Drill Point Size : No....

Zinc twin fine thread drywall screw. Features : Manufactured to JIS B1125 (1995) and independently tested to IFI specification ASTM C1002-89. - 25ø Super Sharp (SS) point for ease of penetration. - 60ø twin thread. - Surface har...

Features : SPAX 4CUT point : allows screwing in without pre-drilling (wood-dependent), reduces splitting as square end displaces the fibres - SPAX ground serrations : up to the point - quick and secure fastening - SPAX MULTI Head : flus...

Features : SPAX 4CUT point : allows screwing in without pre-drilling (wood-dependent), reduces splitting as square end displaces the fibres - SPAX ground serrations : up to the point - quick and secure fastening - SPAX MULTI Head : flus...

Increased flexibility - with universal application. Applications : For universal use in wood, chipboard, MDF, plastic and even thin metal sheet! Multihead : Cutting ribs help the head countersink into wood easily. - Screw head ...