
14.98 £
Used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work. Dimensions : Shank ID - 1/8 inch Col...

14.98 £
Used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work. Dimensions : Shank ID - 3mm Collet O...

11.49 £
Used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work. Dimensions : Shank ID - 1/4 Inch Col...

11.49 £
Used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the correct size collet is recommended. Should not be used for extensive periods or heavy work. Dimensions : Shank ID - 8mm Collet O...

33.32 £
The collet is a one-piece multi-slit design to provide maximum grip on to the surface of the cutter's shank. Dimensions : Precision multi-slit one piece 8mm collet Please note that prices in the Trend Catalogue download, if shown belo...

8.49 £
Two part plastic inserts enabling the tidy ducting of computer, telephone and audio cables, through desktops, cabinets and shelving units. Cover plates can be removed to allow plugs to pass through. Dimensions : Size : 60mm - black - pack of ...

6.85 £
Guide bush collar. Collar consists of an aluminium ring, grooved on the inside to take a neoprene ring. This ring grips the spigot of the guide bush, preventing it from working loose while routing. Dimensions : 16mm - 30mm Please n...

6.85 £
Guide bush collar. Collar consists of an aluminium ring, grooved on the inside to take a neoprene ring. This ring grips the spigot of the guide bush, preventing it from working loose while routing. Dimensions : 20mm - 40mm Please n...

6.85 £
Guide bush collar. Collar consists of an aluminium ring, grooved on the inside to take a neoprene ring. This ring grips the spigot of the guide bush, preventing it from working loose while routing. Dimensions : 7.9mm - 14.28mm Plea...

8.49 £
Guide bush guides the router when using a template. Fits directly to Trend T3,T5,T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Dimensions : Outside diameter...

8.49 £
Guide bush guides the router when using a template. Fits directly to Trend T3,T5,T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Dimensions : Outside diameter...

8.49 £
Guide bush guides the router when using a template. Fits directly to Trend T3,T5,T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Dimensions : Outside diameter...

8.49 £
Guide bush guides the router when using a template. Fits directly to Trend T3,T5,T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Dimensions : Outside diameter...

8.49 £
Guide bush guides the router when using a template. Fits directly to Trend T3,T5,T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Dimensions : Outside diameter...

16.49 £
When setting up jigs, templates and routing devices, it often becomes necessary to temporarily fasten parts together. For this purpose, Trend offer threaded inserts for fixings in plastics, woods, man-made boards and fibre board e.g. MDF. Threa...

14.21 £
Made from reinforced plastic with lift and lock ratchet system. With a steel studding. Suitable when lever turning angle is limited. Supplied as pack of 1. Dimensions : Thread - M12 Diameter - 80mm Height - 54mm Thread leng...

6.20 £
Made from re-inforced plastic, with a plated steel studding. Suitable when a strong clamping action is required. Supplied as pack of 2. Dimensions : Thread - M8 Diameter - 40mm Height - 27mm Thread length - 35mm Please not...

6.85 £
Shank Diameter=6.35 Dimensions : To suit the Power Devil PDW5027 Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excludi...

5.49 £
A strong, reliable and easy to fix low cost anchor for wood and fibre board. Simply insert into a pre-drilled hole and hammer gently into place. They are pronged and self-locking to prevent rotation during use. Dimensions : Hole diamet...

18.95 £
A strong, reliable and easy to fix low cost anchor for wood and fibre board. Simply insert into a pre-drilled hole and hammer gently into place. They are pronged and self-locking to prevent rotation during use. Dimensions : Hole diamet...