
5.95 £
Made of heat treated tool steel with hex shafts. Fitted with High Speed Steel drill bit and is self clearing. Adjustable for different screw lengths and will produce a 12.7 mm (1/2 inch) diameter counterbored hole to fit standard woodplugs. ...

12.95 £
Tungsten Carbide tipped version of the popular Snappy drill countersink. This tool can be used in abrasive materials such as laminated chipboard. The drills produce pilot holes only. Adjustable for different screw lengths and will produce a 9.5...

18.95 £
Tungsten Carbide tipped version of the popular Snappy drill countersink. This tool can be used in abrasive materials such as laminated chipboard. The drills produce pilot holes only. Adjustable for different screw lengths and will produce a 12....

11.95 £
Tungsten Carbide tipped version of the popular Snappy drill countersink. This tool can be used in abrasive materials such as laminated chipboard. The drills produce pilot holes only. Dimensions : Diameter : 9.5mm Diameter : 2.75mm (7...

4.49 £
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions : Diameter : 5/32 inch Shank Diameter : 1/4 inch Hex Please note that prices in the Trend Catalogue dow...

4.49 £
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions : Diameter : 6.0mm Shank Diameter : 1/4 inch Hex Please note that prices in the Trend Catalogue downloa...

4.95 £
The HSS drill bit is gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Dimensions : Diameter : 7/32 inch Shank Diameter : 1/4 inch Hex Please note that prices in the Trend Catalogue dow...

20.95 £
This sprung-loaded drill bit guide is self-centering. Used for accurate drilling of holes in hinges and other ironmongery to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS drill bit. Dimens...

38.95 £
These sprung-loaded drill bit guides are self-centering. Used for accurate drilling of holes in hinges and other ironmongery to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS drill bit. Dim...

16.95 £
High quality forged and ground carbon steel short Forstner bit for drilling accurate holes. For use with the Snappy Quick Chuck. Will also drill overlapping holes. Dimensions : Diameter : 28mm Overall Length : 86mm Shank Diameter : ...

2.49 £
The hex collar enable drills to be removed with two spanners. Dimensions : as supplied on drill bits Enables drills to be removed with two spanners Please note that prices in the Trend Catalogue download, if shown below, may differ...

3.49 £
Tungsten Carbide Tipped masonry drill to suit wall plugs. Dimensions : Diameter : 7mm Overall Length : 123mm Shank Diameter : 1/4 inch hex Please note that prices in the Trend Catalogue download, if shown below, may differ to the w...

9.95 £
Ideal for bolts. Suitable for use with sheet metal screws. Dimensions : AF= 1/4 inch Overall Length : 65mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those liste...

8.49 £
Ideal for bolts. Dimensions : AF=7mm Overall Length : 65mm Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding ...

28.95 £
This set incorporates one of each of the four main lines and is designed for No.6 screw size. Dimensions : Screw size=No.6 Quick chuck Drill countersink No.2 Pozidrive bit Drill bit guide Shank Diameter : 1/4 inch Hex P...

10.49 £
High grade tool steel bits, hardened for ultimate wear resistance. The bits have 1/4 inch hex shanks to fit the Quick Chuck. Dimensions : 3 x Phillips No.3 bits Shank diameter - 1/4 inch Hex Please note that prices in the Trend ...

7.95 £
High grade tool steel bits, hardened for ultimate wear resistance. The bits have 1/4 inch hex shanks to fit the Quick Chuck. Dimensions : Mixed pack of bits Pozidriv No.1 Pozidriv No.2 Pozidriv No.3 Shank Diameter : 1/4 inch H...

24.95 £
Specially for use with Snappy Taps fitted into torque control screwdrivers. Ideal for jig making. Dimensions : Tap sizes - M4, M6, M10 Shank diameter - 1/4 inch Hex Please note that prices in the Trend Catalogue download, if s...

4.49 £
Square Robertson screwdriver bits. Dimensions : Diameter : 7/64 inch Overall Length : 50 mm Shank Diameter : 1/4 HEX Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as thos...

23.95 £
Specially for use with Snappy Taps fitted into torque control screwdrivers. Ideal for jig making. Dimensions : Tap sizes - M3.5, M5, M8 Shank diameter - 1/4 inch Hex Please note that prices in the Trend Catalogue download, if ...