RTD Cleancut is a specially formulated, low viscosity, oil and solvent free, hand applied metalworking liquid suitable for use with all metals - including aluminium, brass and copper. Excellent cutting performance. Prolongs tool life.

Rocol Layout Ink Spray allows easy markings to be made on bright metal surfaces. Resistant to washing off by metal cutting fluids. Colour : blue. ...

Suitable for lubricating and cooling blade and workpiece when cutting mild steel. Size : 5ltr...

Flat bit extension shaft. Hardened and ground. Lacquered for rust protection. Two locking screws and one hexagonal key for fastening are included with each extension shaft. ...

Rocol RTD spray is an aerosol applied metal cutting lubricant, consisting of a concentrate of extreme pressure additives. When applied, it supplies a film of metal cutting fluid direct to the cutting zone. Suitable for use during machining operati...

Rocol Layout Ink Spray allows easy markings to be made on bright metal surfaces. Resistant to washing off by metal cutting fluids. For dark surfaces use ROCOL Layout Ink Fluid (White). 1. Litre. ...

Rubber backing pad for use with sanding discs. Suitable for all drills. 6mm arbor. ...

A 1.1M (44in) long flexible drive shaft that will fit directly into the chuck of any cordless or electric power drill. The reinforced ends and anti-kink design prevents wear and helps provide a long working life. A 6mm (1/4in) capaci...

Use of the universal cutting oil increases the operational life several times over when cutting metal....

The Multi-Sharp® ATT2001 unique drill bit sharpener accurately sharpens the following drill bits : HSS (incl. titanium coated) Masonry (regular and hammer) SDS-Plus Centre-point wood (brad-point). 3-13mm diameter. It ...

Specifications : For drill bit diameters (mm) - 2.5 - 10 Drill bit tip angle - 118 degrees Attachment spindle collar diameter (mm) - 43 Recommended speed (RPM) - 2000-3000 NOTE : The drill sharpener needs a 43mm diameter plain collar...

Used in conjunction with a standard bench grinder, the attachment gives fast and accurate sharpening of HSS twist drills from 3mm-19mm or 1/8-3/4 diameters. The diecast body has pre-set notches at 41° (countersink), 49°, 59°, 68°...

High Speed Steel Rosehead 90° included angle countersink. For countersinking screw holes for flush fitting of screw heads in mild steel, plastics and non-ferrous metals. Also suitable for working in wood, plywood, MDF and other man made boards.

Flat bits are designed to perform fast, clean cuts and will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutt...

Flat bits are designed to perform fast, clean cuts and will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutt...

Carbon Steel Rosehead Countersink. For countersinking screw holes in wood for the flush fitting of screw heads. Can be used in both hand and power drills. Type : Rosehead Size : 16mm (5/8in) Shank diameter : 6mm (1/4in) Sha...

Short series or stubby combination auger bit for drilling timber, plywood, MDF and blockwood. Ideal for use in confined spaces, overall length 120 mm. Precision machined from high quality carbon steel with wide flat spiral for improved stabi...

A 300 mm Extension complete with allen key for use with 16 mm and above Faithfull flat bits. ...

These dowel drills have centre point for accurate location and are supplied complete with an adjustable depth stop. Size. 6mm. ...

Faithfull combination auger bits long series for drilling timber, plywood, MDF and blockwood. Precision machined from high quality carbon steel with wide flat spiral for improved stability and straight tracking. Suitable for use in han...