
16.95 £
Manufactured from heat treated Chrome Molybdenum steel. Rapid acting helix aids screw removal. Includes tap wrench. Extractors supplied in storage case. Contents : 1/8-1/4, 1/4-5/16, 5/16-7/16, 7/16-9/16, 9/16-3/4, Tap Wrench...

1.49 £
Expert Quality , high speed straight shank twist drills. Packed two twist drills per hang up wallet. Manufactured to DIN 338 and ISO 235/1 Specifications....

4.95 £
Expert Quality , medium carbon steel hardened and tempered with a blacked finish. For use with hand and power tools. Display packed in wallets....

35.95 £
Bosch Pointed Chisel 520 mm Hexagon Shank 28mm for GSH 27 And GSH 16-28 Breakers...

13.95 £
A lip and spur drill for use in a plunge router in conjuction with the Craft Dovetail jigs with doweling attachment. The drill is tungsten carbide tipped for use on natural timbers and manmade boards. This drill is used for wooden dowels. The s...

40.03 £
This machine bit have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribes give a very clean entrance hole. Not for use on hard den...

44.82 £
This machine bit is typically used by kitchen furniture manufacturers for recessing circular hinges. With scribers is used on veneered and wood finishes. Dimensions : Diameter : 15mm Overall Length : 60mm Shank Diameter : 3/8 inch

105.95 £
This machine bit is designed for recessing circular concealed hinges. The shank has a flat for securing and a grub screw for height adjustment. Use at recommended speeds of 6000RPM. Dimensions : Diameter : 28mm Overall Length : 57mm

19.00 £
Made from high grade Carbon Steel and meticulously heat treated. Cuts fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scalloping operations.

102.00 £
Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to be...

89.11 £
Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have five wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to b...

36.54 £
For use in power drills and stationary drilling machines. Ideal for use with plastic, metal and wood for enlarging a smaller hole to a larger size. The maximum thickness is determined by the length of step. Hole deburred at the same time.

50.28 £
Has 2 lips, 2spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. This drill is used mainly for drilling cross grained timber and particle board. Used in all branches of industry when clea...

40.95 £
Has 2 lips, 2spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. This drill is used mainly for drilling cross grained timber and particle board. Used in all branches of industry when clea...

139.95 £
This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

14.95 £
This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

17.95 £
This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

116.95 £
This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

12.95 £
This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

22.49 £
This adaptor is produced with a 10mm aperture. Will accept Ref. 4109, 4119, 4507, 1009, 1109 and 1209 drilling tools. The type of threaded shank may vary depending on the manufacturer of the multi-boring machine. Dimensions : Diameter...