For filing circular openings or concave surfaces. Tapered slightly towards the point. Size 200mm (8in) Cut : round bastard. Tanged. ...

For filing internal acute angles and cleaning out square corners. Double cut teeth with sharp edges. Size : 300mm (12in) Cut : three square bastard. Tanged. ...

For filing internal acute angles and cleaning out square corners. Double cut teeth with sharp edges. Size 150mm (6in) Cut three square smooth Tanged. ...

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Size 300mm (12in) Cut : square bastard. Tanged...

For filing internal acute angles and cleaning out square corners. Double cut teeth with sharp edges. Size 200mm (8in) Cut : three square second. Tanged. ...

For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut. Size 300mm (12in) Cut : round smooth. Tanged. ...

A small rectangular slender file with edges tapered to a point. Both faces double cut for locksmithing and other precision work. Size 150mm (6in) Cut : warding smooth. Tanged ...

Size 200mm (8in) Cut : half round bastard. With ergo-grip handle. ...

Double ended saw file for general purpose saw sharpening with both ends having second cut teeth. Single cut teeth on all sides. Fitted with an Ergo type handle. Size 150mm (6in). Side : 1/4in. ...

Smooth single cut teeth for sharpening round hooded chain saw teeth. Safe point and special tooth construction for rapid cutting. Length 200mm (8in). Diameter : 7/32in. ...

Millsaw files have parallel surfaces with the edges tapering toward the point. Surfaces and edges are single cut - commonly referred to as mill bastard. This type of file is suitable both as an engineering file and a sharpening file. I...

For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel....

Wood rasp for work in plywood, wallboard, plastics and other soft materials. The comfortable ergo handle gives good grip and control. Second cut cabinet rasp. ...

Tapered half round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. Double cut. Size 200mm (8in) Cut : half round bastard. Tanged...

Flat files do the same jobs as hand filesbut are sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and stee...

Surfaces taper to a point, flat and convex surfaces double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths. Half round. Size : 16cm. Cut. : 0 (bast...

A set of 2 ergo handled files for comfort and grip suitable for homeowners. Both files are 8in in length. 1 for wood : 1 side - bastard rasp, 1 side - double second cut. 1 for metal : 1 side - bastard double cut, - 1 side - single s...

With one safe edge. Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

With one safe edge. Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...

With one safe edge. Carbon chrome steel hardened and tempered with rust preventative finish and dipped in rust preventative oil. Manufactured in accordance with BS498 : 1990...