
21.95 £
Suitable for pulling heavy objects such as cars, boats, logs, etc. Two pressed steel gears with twin locking pawls. Detachable torch incorporated into handle. Uses 2 x AAA batteries (supplied separately). Specification : Capacity - pulling...

31.95 £
Expert Quality , for cutting thin walled exhaust pipes 35-64mm diameter, up to 3mm thickness. The complete cut can be made in just a quarter of a turn making this tool ideal for working in confined spaces under vehicles....

359.95 £
Enables the axle bush to be removed and a replacement installed in situ, without the need to disassemble the rear axle carrier. The kit includes a main removal frame that is used together with combinations of adaptors and removal plates. Combinations...

194.95 £
1500kg Foot operated hydraulic unit. Quicker and easier than using ratchet driven spring compressor. Plastic coated yokes reduce the risk of spring slippage or damage and are suitable for springs from Ø102mm to Ø160mm. Maximum Load : 1500kg ...

8.34 £
Double end cleaning brush with solvent resistant bristles. Suitable for all types of water-soluble degreasing. Also excellent for applying cutting oils when drilling and machining. Length : 300mm...

98.95 £
Cast body and steel frame with machined steel toothed arbor. Four position table with varying sizes of cut-outs for pressing operations. Suitable for repetitive manufacturing operations. Throat Depth : 114mm Maximum Distance Table to Piston : ...

503.95 £
All steel manufacture with 3mtr rubber hose, tungsten carbide nozzle and in-line water trap for moisture-free grit blasting. Supplied with bayonet air line coupling and full instructions. Accepts a variety of grits from 30microns to 800microns and is...

30.95 £
SSG9E are suitable for cleaning larger areas. This economy (E) version features a reduced diameter nozzle for use with smaller compressors. This gun will accept a variety of abrasives including sand, chilled iron grit and other proprietary types of b...

17.95 £
Protection for hands, wrists and forearms. Suitable for all types of shot/grit blasters. Length : 585mm...

9.95 £
Heat treated alloy steel socket. 35mm Hex drive with Ø19mm internal clearance for OEM and non OEM fittings. Ø50mm Ring with drive pegs which locate in slots cut in the ball joint flange. Suitable for Citroen and Peugeot 405 lower ball joints....

6.95 £
Steel construction with dipped vinyl handle. Enables fast removal and installation of rubber anti-vibration mountings found on modern exhaust systems....

19.95 £
Enables fast, one-handed, removal of exhaust brackets from rubber hangers. Suitable for a wide range of cars and light commercial vehicles. Length : 270mm...

27.95 £
Designed for cutting thin walled steel and copper tubing. Suitable for cutting exhaust pipe with diameters from 20-75mm. Handle Length : 210mm Cutting Capacity : Ø20-75mm...

36.95 £
Suitable for use in the bodyshop. The feathering action makes this blaster ideal for treating stone chips. Supplied with a set of four rubber nozzles for sealing the gun head to the panel and a 700g bottle of blasting grit. Air Pressure : 60-12...

18.95 £
Ergonomically designed, robust, tyre pressure gauge with integral tread depth gauge. Rubber grips fit comfortably in the hand. Push-button operation with backlit LED display for tyre pressure Read-out available in psi, bar, kPa or kg/cm². Integral tr...

524.95 £
Updated version of optical system uses low radiation laser beam to indicate toe-in or toe-out. Single leg configuration and reversible contact probes allow on-ramp use. Works on practically all cars and light commercials with rim diameters from 200 t...

52.95 £
Designed for twin tyres but suitable for all cars and commercial vehicles. Precision engineered and fitted with large filter to protect operating mechanism for hard usage over long periods. Scale : 0-11bar(0-160psi)...

9.95 £
Steel body with thrust bolt. Suitable for hubs with four stud fixings and stud centres between 110 and 115mm....

63.95 £
Hydraulic ram piston fits all Sealey hydraulic puller sets and is also suitable for use with other popular makes of hydraulic gear pullers. Screw mechanism converts power to 10tonne ram head with enough force to remove most stubborn bearings, pulleys...

11.95 £
Composite cone. Enables installation of CVJ boot without splitting drive train. Length : 320mm...