For use in the garage and workshop. Features include : High pressure pump, sliding head press, supplied with a pair of V blocks. Eye level pressure gauge for controlled application of pressure. Carton packed on pallet. Specification : Ram s...

Two level static tyre rack helps keep working area clear. Stores up to 16 tyres per level with a total capacity of 400kg (200kg/Level). Steel construction with a powder coated finish giving anti-corrosion resistance. Overall Size (W x D x H) : ...

Wall mounting electric fan fitted with heat resistant ducting and exhaust pipe cone with exhaust gas analyser port. Ideal for bikes, cars and car derived vans. Requires installation onto workshop wall and ducting to expel exhaust gases. Does not incl...

The Facom DCR.IPPSAPB kit is designed to allow removal of Bosch and Siemens injectors from Peugeot, Citroen, Fiat & Lancia engines. Suitable for injectors that are too tight or be removed with a large slide hammer. Not suitable for heavily corroded i...

Features : Saves time - Allows fitting and removal of axial ball joints on the vehicle without having to remove the rack via access through the fender flange - Hex 30mm drive for high tightening or loosening torque - Easy to maintain...

Expert Quality , each fitted with four heavy duty white non-marking castors. Robust steel manufacture enables up to 454kg weight to be carried on each dolly. Designed to locate underneath vehicle wheels allowing precise and easy movement...

Puller with two reversible legs for external and internal pulling of gears, bearings, etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with ch...

Puller with two reversible legs for external and internal pulling of gears, bearings, etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread with ch...

Puller with a two and three leg option for external and internal pulling of gears, bearings, etc. Legs are forged carbon steel and have long and short reach facility. Yoke and thrust bolt are manufactured from carbon steel. Screw has a rolled thread ...

Forged carbon steel claws hardened and tempered. M16x1.5mm screw manufactured from carbon steel hardened, tempered with a chemically blacked finish. Capacity 90-200mm....

Expert Quality , dual reading graduated 6-50 psi in increments of one psi and 0.4-3.4 bar in increments of 0.1 bar. In line feature allows access to awkwardly positioned tyre valves. Gauge has valve remover and pocket clip. Blue zinc pla...

For the hobbyist or professional user. Suitable for removing old paint, rust spots, etc. Fitted with a collection bag enabling grit to be re-used. Contents : •   sand blasting gun with collection bag • ...

Robust alloy construction with accuracy of ±1%. Manufactured to EN 837-1/6 and supplied with three air connectors : Straight, 45° and 90°. Rotating bezel ensures accuracy of gauge reading. Professional quality product, suitable for testing regular car...

Push-on type tyre pressure gauge with 8mm digit, easy read, LCD display calibrated in psi. Pressure release valve. Single lithium battery will run approximately 4000 test cycles. Auto-off function with low battery indication. Swivel head rigid type w...

Twin leg puller with reversible, drop-forged, Chrome Vanadium steel legs. Heat treated for added strength and chrome plated to resist corrosion. Size/Spread : 68mm Reach : 75mm...

Triple leg puller with reversible, drop-forged, Chrome Vanadium steel legs. Heat treated for added strength and chrome plated to resist corrosion. Swivel thrust plate prevents damage to shaft ends. Size/Spread : 175mm Reach : 150mm...

Robust, magnetic gauge mounts onto hub for quick and accurate measurement of camber and castor angles. Large adjuster knob for convenient zeroing of bubble during castor angle measurement. Graduated from +6° to -6°. Supplied in carry-case. Adj...

Comprehensive kit of tools for the fast and effective removal and installation of wheel bearings on front-wheel drive vehicles. Reduces chances of damage to hub and bearing. Heavy-duty steel drifts with phosphate coating to prevent corrosion. Heavywe...

Intended for rapid removal/installation of Vauxhall/Opel Vectra (95-02) upper and lower rear trailing arm bushes. Bushes are quickly pressed in or out with tool and a 19mm ratchet wrench (not included). Applications : Vauxhall/Opel Vectra (95-...

Chemically blackened forged steel body with thrust bolt. Suitable for most small cars and light vans. Jaw Capacity : 19mm...