
38.95 £
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistence to damp environments. 28° Collation Angle Designed for the construction mar...

2.95 £
BT13 Series 18 gauge brown Brad nails for use with the Bostitch brad nailer. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily u...

6.95 £
Brad Nails to fit Arrow Staplers T50PBN, ET100 and ET200 Brad nails for use with the arrow ET125 end ET200 Nail guns Size : Length 11/4 Inch Gauge : 18 Box Qty : 2000 ...

4.95 £
For use in 0327 Master Nailer 191EL Pro, 0192 Master Nailer 181EL Pro, 0328 Hobby 53EL, 516857 Pro 140EL, 0756 Master Nailer Ranger 40 Duo Pro Pack, 0758 Master Nailer Ranger 40 Duo Trademans Pack. ...

33.95 £
PT Series 33° angled nails for use with F33PT and F33PTSM angled nailers. Gauge/Diameter (mm) 2.8 Length 70 Collation Angle 33 Degrees SKU PT28070-2M Profile SMOOTH Finish BRIGHT Description 2.8MM SMOOTH

2.95 £
Type 8/180/300/E/J brad nails. Suitable for use with all Stanley brad nailers. Fits Stanley : TR200series, TRE500series, 69-702, 69-721 and SWK-BN125 Size : 15mm Qty : 1000 ...

1.95 £
Type 53 light-duty staple. Fits Stanley : TR45, 69-721, 69-701, 69-702 69-702, 69-720, 69-721, ST10 and ST14 staplers. Size : 8mm Qty : 1000 ...

11.95 £
16 gauge angle finish nails for use with : - Paslode® IM250A Nailer Dewalt DC618 Nailer ...

4.95 £
Tacwise Flat Wire Staple. Ideal for breather membrane (Tyvek, etc), building paper and insulation. For hand/electric staple guns and hammer takers using 140, T50, G type staples. Size : 14mm. Pack quantity : 2000. ...

5.95 £
Tacwise fine wire staple, commonly used for semi-industrial/DIY applications. This staple is thinner than 140 type and not so visible. Suitable for the Tacwise Z1-53, Z1-53l, Z1-53T, Z3-53, Z3-53L and the Hobby 53EL as well as the Arrow JT21...

4.95 £
Tacwise galvanised narrow corwn staples, ideal for a wide variety 2nd fix tasks. Suitable for 191EL Pro Stapler/Nailer, Tacwise 35 Duo Nailer/Stapler and Tacwise 50 Duo Nailer/Stapler. Size : 15mm. Pack quantity : 1000. ...

4.95 £
For use with 0328 Hobby 53EL Electric tacker/nailer...

4.49 £
Narrow Crown Staple. Length : 6mm Width : 9.5mm Packed Quantity : 1,440 ...

27.95 £
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and cov...

86.95 £
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor,...

87.95 £
The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter Meet the Eurocode 5 require...

88.95 £
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and cov...

31.95 £
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and cove...

21.95 £
ProStrip paper tape collated nails provide high holding power and ease of drive. Nail strip will not break when dropped and will not deteriorate in wet weather. Also, no collation material is left on the job site. ProStrip nails come in smooth and ri...

89.95 £
Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, ...