Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is a...

BT13 Series 18 gauge brown Brad nails for use with the Bostitch brad nailer. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily u...

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistence to damp environments. 28° Collation Angle Designed for the construction mar...

Narrow Crown Staple, Type 5 Ideal for fabric, cardboard, wood and carpet. Pack of 14 mm staples to suit B/DA5753 Powershot heavy-duty Stapler. Narrow Crown Staple. Length : 14 mm Width : 9.5 mm Packed Quantity 1440...

Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails ...

High carbon Zinc Dichromate HCFN finish nail 15 gauge. For use with Bostitch concrete block nailer. 50mm Gauge/Diameter (mm) 15 GA Box 1500 High Carbon Zinc Dichromate Suits : SB-HC50FN ...

Fixing nails for the N62 FNK-2 finish power nailer. 25° Collation Angle Finish Nails and Brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that ...

Fixing nails for the N62 FNK-2 finish power nailer. 25° Collation Angle Finish Nails and Brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that ...

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistence to damp environments. 28° Collation Angle Designed for the construction mar...

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistence to damp environments. 28° Collation Angle Designed for the construction mar...

Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is a...

An air line Combo Pack which includes everything needed to hook any Bostitch Pneumatic tool to a compressor Contents : 3/8in X 15 metre air hose. pipe thread seal tape. Pneumatic tool oil. 1/4in Female pipe thread plug. 1...

Galvanised finishing staples for use with Stanley Bostitch Pneumatic Finish Staplers. A Bulk Pack of 5000 19 mm Finish Staples for use with Stanley Bostitch Pneumatic Finish Staplers. Length : 19 mm. Pack : Box of 5000. ...

ProStrip paper tape collated nails provide high holding power and ease of drive. Nail strip will not break when dropped and will not deteriorate in wet weather. Also, no collation material is left on the job site. ProStrip nails come in smooth and ri...

16 gauge angle finish nails for use with : - Paslode® IM250A Nailer Dewalt DC618 Nailer ...

For use in 0327 Master Nailer 191EL Pro, 0192 Master Nailer 181EL Pro, 0328 Hobby 53EL, 516857 Pro 140EL, 0756 Master Nailer Ranger 40 Duo Pro Pack, 0758 Master Nailer Ranger 40 Duo Trademans Pack. ...

Tacwise fine wire staple, commonly used for semi-industrial/DIY applications. This staple is thinner than 140 type and not so visible. Suitable for the Tacwise Z1-53, Z1-53l, Z1-53T, Z3-53, Z3-53L and the Hobby 53EL as well as the Arrow JT21...

Galvanised brads reduce the likelihood of rust or staining, designed for De Walt nailer ensuring fewer jamming or fitment issues . DEWALT brads are made from inspected high quality steel to ensure reliability in performance ...

The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter Meet the Eurocode 5 require...

Nails 18gauge 15mm. Pack of 5000. Length (mm) : 15 Pack Qty : 5000 Application : SA791, SA792, SA793...