Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers. Centre locking drain test plugs with steel plates, brass wing nuts and brass blanking caps. S...

The Baileys Drain Tracing Dyes are soluble in water and are used to locate the direction of water flow in pipes, drains etc. The best way to use the dye is to dissolve the required amount into about five litres of water and then add into the...

The Bailey BAI3745 Smoke Pellets are small in size and give off a white smoke when ignited. These smoke tablets are used for testing flues, chimneys and fans. Size : Small Contents : 6 per tube Part No : 3745 ...

Monument smoke emitter matches give off a dense white low-toxic smoke when ignited. Have a burn time of 20 seconds. For testing flues, chimneys, fans etc. Supplied in a box of 12. ...

Monument nipple cap for attachment to drain test plug outlets to enable connection of rubber hose to the U Gauge. Size : 1/2 in BSP. ...

The brass test nipple cap is fitted to a drain test plug for the completion of air tests. Size : 1in. ...

This Monument set of 6 Test Plugs contains the following small bore test plugs : 2 x 1370B 15mm Test Plug. 2 x 1371E 22mm Test Plug. 2 x 1372H 28mm Test Plug. Used for blocking off small pipes such as copper pipes for dry t...

Monument testing plugs are durable, quality flexible drain plug for the pluging of drains and pipes. This plug is easy to use and are avaliable in 3, and 4-inch versions. These plugs are easy to use just place in the pipe end that is being r...

Centre locking drain test plugs with steel plates, brass wing nuts and plastic blanking caps. Suitable for air or water testing of drains and sewers. Size 150mm (6 in) ...

TMonument Drain Test Plug is suitable for blocking off drain pipes and for air testing. It is fitted with removable top caps and rubber rings. Plates and stem made from Nylon. Diameter range : 48-62mm. Maximum allowable back pressure : 3...

Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers. Size 250mm (10 in) ...

Monument air testing U gauge kit containing all the items (except testing plugs) needed to carry out an air test to 100mm (4 in) water gauge pressure on any size of drain or pipe. Kit contains : U Gauge, hand bellows pump, 1/2 in and 1 in BSP...

The Baileys Drain Tracing Dyes are soluble in water and are used to locate the direction of water flow in pipes, drains etc. The best way to use the dye is to dissolve the required amount into about five litres of water and then add into the...

Centre locking drain test plugs with steel plates, steel wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers. Size 225mm (9 in) ...