The Dremel TRIO P120 Sanding Band for fine (Grit 120) shaping and smoothing wood and fibreglass, removing rust from metal surfaces and shaping rubber surfaces. Sanding bands are easily replacable. Decidated accessory for use with Dremel Trio only.

The Dremel TRIO Straight Router Bit for routing and inlaying in wood and other soft materials. Decidated accessory for use with Dremel Trio only. Specifications : Shank diameter : 4,8 mm Working diameter : 6,5 mm...

The EZ SpeedClic Sanding Discs are great for light sanding and shaping. The discs are available in 60 and 240 grit with a diameter of 30mm and are compatible with the SC402 mandrel. Change discs without using a wrench! The EZ SpeedClic sanding discs ...

The Wood Flush Cut Blade (MM480) is Dremel’s largest and fastest high-carbon steel flush cut blade with the ability to perform precise plunge cuts and flush cuts allowing for installation of flooring or wall trim. Especially designed for wood. Ca...

The Wood and Metal Flush Cut Blade (MM482) is Dremel’s largest and fastest bi-metal flush cut blade with the ability to perform precise flush and plunge cuts. Especially designed for metal. Can cut non-ferrous metals, nails, wood, plastic, drywal...

7.2V Li-Ion Battery Pack (808) is for use with the Dremel 8100 cordless multitool....

Features & Benefits : &bull Multi-tool Toitanium Flush Cut blade &bull Titanium coating for a longer performance life &bull Accessories fit all common oscillating tools &bull Quick & easy blade change Specifications :

Transforms your Dremel tool into a precision circular saw for fine, clear and straight cuts in all sorts of wood. Perfect for laminate and wood flooring or thin wood plates. The safety guard and lower guard make it safe to use the circular saw blade....

The tile cutting bit 562 cuts ceramic wall tile, cement board and blaster. (Not for use on floor tile) Specifications : Shank diameter : 3,2 mm Working diameter : 3,2 mm Maximum RPM : 35.000 1/min...

Fast cutting sharp teeth for greater material removal. Use on fiberglass,wood, plastic, epoxy, rubber, laminates, particle board, soft metals, ceramic tile. Technical specifications : Shank diameter : 3,2 mm Working diameter : 6,4 mm...

Brass brushes are non-sparking and softer than steel.They will not scratch soft metals like gold, copper, brass. Specifications : Shank diameter : 3,2 mm Working diameter : 19,0 mm Maximum RPM : 15.000 1/min...

Use for light deburring, cleaning, polishing of silverware, jewelry and other precious metals. Can be used with polishing compound (421). Specifications : Shank diameter : 3,2 mm Working diameter : 13,0 mm Maximum RPM : 15.000 1/m...

For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Sanding bands are easily replaceable. Specifications : Shank diameter : 3,2 mm Working diameter : 13,0 mm Grit : ...

Stainless steel brushes do not cause “after rust” when used on corrosive-resistant materials like pewter, aluminum and stainless steel. Specifications : Shank diameter : 3,2 mm Working diameter : 19,0 mm Maximum RPM : 15.000 1/min...

Technical specifications : Diameter : 125 mm Grit : 20...

Ideal for polishing metals and plastics. Using polishing compound no. 421 with wheels produces a high luster. Use 414, 422 and 429 with mandrel 401. Use 423 and 425 with mandrel 402. Specifications : Shank diameter : 3,2 mm Working...

Features : &bull Conveniently suspends your Dremel rotary tool above your workbench &bull Perfect for use with the Flexible Shaft attachment &bull Clamps to workbenches up to 50 mm thick, and adjusts in height from 300 to 1070 mm

Use for shaping, smoothing and material removal. Use on hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics, hardwoods and other hard materials. Technical specifications : Shank diameter : 3,2 mm ...

For RS650KA and all types of multi tools. A pack of 3 engraving cutters for the wizard corded rotary tool. ...

This is the perfect solution for stationary working with your Dremel. Drill vertically or in an angle, adjustable in increments of 15 degrees. Holds tool horizontally for polishing and sanding. Integrated, telescoping tool stand holds tool with Flex ...