Has 2 lips, 2spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. This drill is used mainly for drilling cross grained timber and particle board. Used in all branches of industry when clea...

Has 2 lips, 2spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. This drill is used mainly for drilling cross grained timber and particle board. Used in all branches of industry when clea...

This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

This adaptor is produced with a 10mm aperture. Will accept Ref. 4109, 4119, 4507, 1009, 1109 and 1209 drilling tools. The type of threaded shank may vary depending on the manufacturer of the multi-boring machine. Dimensions : Diameter...

Trend Rose C'Sink 12.5mm C'Sink Dia (Hss Drilling Tools / Rose 90 Degree Countersinks) This countersink is produced in HSS and should not be confused with carbon steel types. Designed for countersinking mild steel, iron and plastics.

This slow spiral TCT drill can be used in drilling machines or plunge routers. Use between 1000 and 22000 RPM. Dimensions : Diameter : 5mm Overall Length : 57mm Shank Diameter : 1/4 inch Please note that prices in the Trend Cata...

This countersink is produced from the best grade carbon steel, leaves a clean cut finish by virtue of their multi-tooth deep ground gullets. For use with fast spiral drills. Fits metric drills from 3mm to 12mm inclusive. Drill bit not includ...

This countersink is produced from the best grade carbon steel, leaves a clean cut finish by virtue of their multi-tooth deep ground gullets. For use with fast spiral drills. Fits metric drills from 3mm to 12mm inclusive. Drill bit not includ...

Designed to drill and countersink simultaneously, a wide variety of materials. Supplied complete with HSS twist drill. Fully adjustable, a hex key is supplied. Used for plywood, particle boards and plastics (abrasive). When setting-up, en...

Made from Carbon steel and precision machined. Has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury. Dimensions : Diameter : 25mm Overall Length : 155mm...

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Dimensions : Diameter : 34mm Overall Length : 152mm Shank Diameter : 1/4 inch Hex Please note that price...

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Dimensions : Diameter : 35mm Overall Length : 152mm Shank Diameter : 1/4 inch Hex Please note that price...

TCT hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine covered chipboard to receive circular hinges. For drilling machines Dimensions : Diameter : 35 mm Shank Diameter : 8mm Please note that p...

This machine bit is typically used by kitchen furniture manufacturers for recessing circular hinges. Inexpensive hinge sinker is best suited for laminate covered boards. Use at speed range 2000 -12000RPM to avoid burning. Use with pillar dri...

Features & Benefits : &bull Diamond grit edged bit, ideal for drilling hard tiles &bull Slotted bit design for easy waste removal &bull Suitable for use with most power drills &bull Cuts porcelain, granite, quarry, stone, marble...

The Irwin Blue Groove 4X flat bit have a patented groove point and cutting edge. The cutting edges cut the timber 4 times faster, without scraping. The parabolic scoop optimises control and removal of wood chips. These flat bits have an incr...