Expert Quality , extra long, with combination type shank for power and hand tools on all wood types. Precision machined for perfect concentricity from medium carbon steel and fully hardened. Unique flute spiral has an accurately ground a...

Expert Quality , high speed straight shank twist drills. Packed one twist drill per hang up wallet. Manufactured to DIN 338 and ISO 235/1 Specifications....

The best SDS Drill for professional drilling in concrete, reinforced concrete and Brick. Bosch hammer drill bits, with their optimised tungsten carbide drill bit tip and the innovative 4-fold spiral flute S4 for rapid drilling dust removal : 25% fa...

Specifications : Diameter (D) mm8.0 Working length (L1) mm75.0 Total length (L2) mm117.0 ...

The best SDS Drill for professional drilling in concrete, reinforced concrete and Brick. Bosch hammer drill bits, with their optimised tungsten carbide drill bit tip and the innovative 4-fold spiral flute S4 for rapid drilling dust removal : 25% fa...

A lip and spur drill for use in a plunge router in conjuction with the Craft Dovetail jigs with doweling attachment. The drill is tungsten carbide tipped for use on natural timbers and manmade boards. This drill is used for wooden dowels. The s...

This machine bit have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribes give a very clean entrance hole. Not for use on hard den...

This machine bit have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribes give a very clean entrance hole. Not for use on hard den...

This machine bit have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribes give a very clean entrance hole. Not for use on hard den...

This machine bit have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribes give a very clean entrance hole. Not for use on hard den...

This machine bit have two wings, two scribers and a centre point. Tungsten carbide tipped for extensive drilling of particle boards, and plastics of soft to medium density. The scribes give a very clean entrance hole. Not for use on hard den...

This machine bit is designed for recessing circular concealed hinges. The shank has a flat for securing and a grub screw for height adjustment. Use at recommended speeds of 10000RPM. Two flutes, two scribers and a centre point. For veneer...

Made from high grade Carbon Steel and meticulously heat treated. Cuts fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scalloping operations.

Made from high grade Carbon Steel and meticulously heat treated. Cuts fast, with the grain or across it. They can drill overlapping holes in any direction and are chosen for exacting and delicate work, such as scroll and scalloping operations.

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to b...

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have six wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to be...

Tapered plug cutter with Tungsten Carbide Tip will produce many produce many hundreds of plugs before resharpening is required. For use in drilling machines at a recommended speed of 3000RPM (max. 6000RPM). Material must be well clamped. Not...

For use in power drills and stationary drilling machines. Ideal for use with plastic, metal and wood for enlarging a smaller hole to a larger size. The maximum thickness is determined by the length of step. Hole deburred at the same time.

Making holes in wood and other soft materials is twice as fast with the 3D-Bit. You will notice the difference immediately if you compare it with normal drills. Unlike any other drills, the 3D-Bit has sharp cutting edges in three directions.

This variable diameter drill bit are of heavier construction than ref. 349WS. Suited for production work e.g. repetitive machining in abrasive materials. Regular checking of hole diameter is however recommended. Is supplied as standard with ...