This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

Trend Rose C'Sink 20mm C'Sink Dia (Hss Drilling Tools / Rose 90 Degree Countersinks) This countersink is produced in HSS and should not be confused with carbon steel types. Designed for countersinking mild steel, iron and plastics. D...

This countersink is produced from the best grade carbon steel, leaves a clean cut finish by virtue of their multi-tooth deep ground gullets. For use with fast spiral drills. Fits metric drills from 3mm to 12mm inclusive. Drill bit not includ...

Designed to drill and countersink simultaneously, a wide variety of materials. Supplied complete with HSS twist drill. Fully adjustable, a hex key is supplied. Used for plywood, particle boards and plastics (abrasive). When setting-up, en...

Made from Carbon steel and precision machined. Has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury. Dimensions : Diameter : 20mm Overall Length : 155mm...

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Dimensions : Diameter : 19mm Overall Length : 152mm Shank Diameter : 1/4 inch Hex Please note that price...

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Dimensions : Diameter : 30mm Overall Length : 152mm Shank Diameter : 1/4 inch Hex Please note that price...

An economical bit for cutting quick holes in timber. With centre point, back tapered cutting edge and ground chip breakers. Dimensions : Diameter : 32mm Overall Length : 152mm Shank Diameter : 1/4 inch Hex Please note that price...

A direct drive shank tube type plug cutter with use with the Snappy Quick Chuck. The plug cutter creates a wooden plug or pellet to disguise screw heads. Dimensions : Diameter=12.7mm (1/2 inch) Shank Diameter : 1/4 inch Hex Please n...

Ideal for drilling between joists. Made from high quality carbon steel with screw thread and single spur. Dimensions : Diameter : 13 mm Overall Length : 105 mm Shank Diameter : 1/4 hex Please note that prices in the Trend Catalogue...

Ideal for drilling between joists. Made from high quality carbon steel with screw thread and single spur. Dimensions : Diameter : 25 mm Overall Length : 105 mm Shank Diameter : 1/4 hex Please note that prices in the Trend Catalogue...

Features & Benefits : &bull Diamond grit edged bit, ideal for drilling hard tiles &bull Slotted bit design for easy waste removal &bull Suitable for use with most power drills &bull Cuts porcelain, granite, quarry, stone, marble...

The Irwin Blue Groove 4X flat bit have a patented groove point and cutting edge. The cutting edges cut the timber 4 times faster, without scraping. The parabolic scoop optimises control and removal of wood chips. These flat bits have an incr...

High carbon steel hardened and tempered. Shank diameter 6mm. For use with power drills. Display packed in plastic hang up wallets....

The Irwin Blue Groove 6X drill bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull...

The best SDS Drill for professional drilling in concrete, reinforced concrete and Brick. Bosch hammer drill bits, with their optimised tungsten carbide drill bit tip and the innovative 4-fold spiral flute S4 for rapid drilling dust removal : 25% fa...

The Irwin Blue Groove 4X flat bit have a patented groove point and cutting edge. The cutting edges cut the timber 4 times faster, without scraping. The parabolic scoop optimises control and removal of wood chips. These flat bits have an incr...

The best Sds Drill for professional drilling in concrete And Brick Bosch hammer drill bits, with their optimised tungsten carbide drill bit tip and the innovative 4-fold spiral flute S4 for rapid drilling dust removal : 25% faster in concrete, 25%...

The best Sds Drill for professional drilling in concrete And Brick Bosch hammer drill bits, with their optimised tungsten carbide drill bit tip and the innovative 4-fold spiral flute S4 for rapid drilling dust removal : 25% faster in concrete, 25%...