Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have five wings to ensure a clean cut. Use a slow, constant feed rate ensuring timber is clamped to b...

Tapered plug cutter with Tungsten Carbide Tip will produce many produce many hundreds of plugs before resharpening is required. For use in drilling machines at a recommended speed of 3000RPM (max. 6000RPM). Material must be well clamped. Not...

Tapered plug cutter with Tungsten Carbide Tip will produce many produce many hundreds of plugs before resharpening is required. For use in drilling machines at a recommended speed of 3000RPM (max. 6000RPM). Material must be well clamped. Not...

Has 2 lips, 2spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. This drill is used mainly for drilling cross grained timber and particle board. Used in all branches of industry when clea...

Has 2 lips, 2spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. This drill is used mainly for drilling cross grained timber and particle board. Used in all branches of industry when clea...

Has 2 lips, 2spurs and a centre brad point. Flutings are backed-off to give a radial relief and assist chip clearance. This drill is used mainly for drilling cross grained timber and particle board. Used in all branches of industry when clea...

This lip and spur dowel drill features Solid Carbide cutting tips, for continuous drilling of tear free dowel holes. Shank has one flat for positive holding. A threaded grub screw in the shank end allows for correct setting for a bank of drills...

This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

This 60 degree taper multi-boring drill is ideal for end grain and through hole drilling applications. Reduces the likelihood of +break out+ to a minimum. Drill has a Solid Carbide cutting tip. Shank has one flat for positive holding. A t...

This slow spiral TCT drill can be used in drilling machines or plunge routers. Use between 1000 and 22000 RPM. Is suitable for use in the DeWalt 600mm Dovetail Jig. Suitable for use in the Elu/DeWalt 610mm Dovetail Jig. Dimensions :

Designed to drill and countersink simultaneously, a wide variety of materials. Supplied complete with HSS twist drill. Fully adjustable, a hex key is supplied. When setting-up, ensure flutes of drill are aligned with flute of counterbore.

Designed to drill and countersink simultaneously, a wide variety of materials. Supplied complete with HSS twist drill. Fully adjustable, a hex key is supplied. When setting-up, ensure flutes of drill are aligned with flute of counterbore.

Designed to drill and countersink simultaneously, a wide variety of materials. Supplied complete with HSS twist drill. Fully adjustable, a hex key is supplied. Used for plywood, particle boards and plastics (abrasive). When setting-up, en...

Designed to drill and countersink simultaneously, a wide variety of materials. Supplied complete with HSS twist drill. Fully adjustable, a hex key is supplied. When setting-up, ensure flutes of drill are aligned with flute of counterbore.

Made from Carbon steel and precision machined. Has a spiral point, single flute. Ideal for quick, clean deep holes. Must only be used with torque control drills to prevent wrist injury. Dimensions : Diameter : 6mm Overall Length : 155mm