
6.95 £
High-performance abrasives for wood. Preliminary and intermediate sanding for paintwork and oiling for joiners, carpenters, painters and for the woodworking and furniture industries. Technical data Grit P80 qty. in pack 10 piece(s)...

6.95 £
High-performance abrasives for wood. Preliminary and intermediate sanding for paintwork and oiling for joiners, carpenters, painters and for the woodworking and furniture industries. Technical data Grit P220 qty. in pack 10 piece(s)...

42.95 £
High-performance abrasives for wood. Preliminary and intermediate sanding for paintwork and oiling for joiners, carpenters, painters and for the woodworking and furniture industries. Technical data Grit P100...

42.95 £
High-performance abrasives for wood. Preliminary and intermediate sanding for paintwork and oiling for joiners, carpenters, painters and for the woodworking and furniture industries. Technical data Grit P120...

129.95 £
Diameter 170 mm Cutting width 2,0 mm Hole Ø 30 mm No. of teeth 56 Chip angle -4 ° Tooth shape TF...

22.95 £
Grit P150 qty. in pack 8 pieces...

14.95 £
For RAS 115, RAP 80 For removal of rust of rust and slag to obtain a metallically pure surface...

66.95 £
Grit P50 qty. in pack 25 pieces...

31.95 £
Unperforated Grit P50 qty. in pack 25 pieces...

11.95 £
Cross-set teeth for fast cutting Length of cutting blade 105 mm Pitch 4 mm Maximum workpiece thickness 85 mm qty. in pack 5 pieces...

7.49 £
Hard soldered HW splitter, fine Length of cutting blade 54 mm Pitch - mm Maximum workpiece thickness 30 mm qty. in pack 1 piece...

37.95 £
Cross-set teeth for quick cuts, to cut curves Length of cutting blade 75 mm Pitch 4 mm Maximum workpiece thickness 55 mm qty. in pack 25 pieces...

23.95 £
Grit P100 qty. in pack 25 pieces - High-performance abrasives for extreme conditions. - Sanding thick coatings on hard surfaces...

18.95 £
Grit A120 qty. in pack 10 pieces...

92.95 £
Diameter 225 mm Cutting width 2,6 mm Hole Ø 30 mm No. of teeth 48 Chip angle 10 ° Tooth shape W...

52.95 £
Diameter 180 mm Height 15 mm qty. in pack 5 pieces...

18.95 £
Bimetal : especially for parquet and laminated floors, conically ground teeth, clean cuts Length of cutting blade 75 mm Pitch 2,5 mm Maximum workpiece thickness 55 mm qty. in pack 5 pieces...

7.95 £
Size PZ 1 Length 25 mm qty. in pack 3 pieces...

7.95 £
Size PH 1 Length 25 mm qty. in pack 3 pieces...

10.95 £
Size TX 30 Length 25 mm qty. in pack 3 pieces...